Waterdrop Sight Glass Spigot Clear View Water Level with Red Floating Ball Durable Metal Material Compatible with the Original Gravity-Fed Water Filtration System
- Accuracy: The red floating ball in the sight glass spigot helps to tell the water level clearly, allowing you to see at a glance how much water....
- Leak-free: The glass water level spigot firmly connects with the lower chamber without any crannies. You can worry less about the water leakage..
- Built to last: The main body of the faucet is electroplated with metal material, giving it a stronger and durable structure..
- Hassle-free installation: There is a complementary wrench in the package, which you can use to assemble the spigot conveniently..
- Compatibility: The Waterdrop water level spigot is compatible with the original Travel, Big, Royal, Imperial Water Filter System.
Check Stock
hgzaccompany Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
MOLIGOU Stainless Steel Replacement Spigot with Screen Filter, 2 Pack Beverage Dispenser Spigot Replacement, Polished Finished, Fits 5/8 inch Opening
- MATERIAL: Made of solid 304 stainless steel, no lead, corrosive-resistant, can be used for a long time, two rubber washers are for a tight seal.
- SIZE: Fits 5/8 inch (16mm) openings, dispenser wall thickness could up to 11/16 inch (17mm).
- FAST FLOW WITH NO LEAKS: The stainless steel replacement spigot allows a quick, steady flow for your convenient use, comes with the screen filter to prevent the spigot from being clogged.
- EASY INSTALLATION: No tools needed, if necessary, you could use 3/4 inch wrench for the nut, but do not over-tighten, the simple construction and nice polished finished make the spigot easy to keep clean.
- PERFECT FOR: Replacing the spigot for iced tea jar, glass beverage dispenser, water crock, glass bottle container etc, as long as your dispenser has the right size to install, upgrade the containers and finish the nice look of them.
Check Stock
hgzaccompany 2 Pack Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.
- Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
- Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
- Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
- Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
- Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock
Beverage Dispenser Replacement Spigot,Oak Leaf Stainless Steel Spigot Polished Finished, Dispenser Replacement Faucet
- Notice: Wash before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
- Multi-Function: The Oak Leaf Beverage Dispenser Replacement Faucet is great for Dispensing Tea, wine, water, juices and other beverage..
- Quick Installation: This Beverage Dispenser Replacement Spigot requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
- Warranty & Friendly Customer Service: We have a commitment to every buyer 100% satisfaction. After all, we are customers, too. So if you have any problems about our Oak Leaf Beverage Dispenser Replacement Spigot, just contact us, we’ll settle the issue according to your willingness..
- Premium Quality: The Oak Leaf Beverage Dispenser Replacement Spigot is made of fine food-grade 304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
Check Stock
Mind Reader GALBDISP-SIL 3 Gallon Cold Beverage Dispenser, Leak Free Spigot, Serving, Galvanized Metal, Silver
- ...r home made Iced tea, lemonade, sangria, rum punch, water and much more..
- Durable – galvanized metal container holds drinks safely. High quality metal construction will last for years of usage.
- Spill proof – metal top lid top prevents anything from outside getting into the drink.
- Mess free – non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages.
- Leak Proof Spigot – The spigot was designed with great attention to detail as it will not leak even when it is at full capacity and you have been pouring drinks all day..
- Mess Free – The non-drip spigot prevents a leaky faucet. No more having to worry about your Table cloth or Table getting ruined by beverages. Most importantly you and your guest can pour drinks without having to worry about the spigot leaking juice or water on your shoes or clothing..
- Easy Removable Lid – Comes with an easy to remove lid that allows you to add extra ingredients to your sangria like apples, grapes, oranges, pears and any other special addition you would like to add to your beverage..
- Sturdy Stand – Includes a stand for your beverage drinks dispenser that is sturdy and....
Check Stock
Spigotmaster ~ SM01.125 Vacuum Breaker Adapter ~ Converts an Arrowhead PK1360 Anti-Siphon Valve Into a Straight Through Connection
- Converts Arrowhead, NIBCO & Other Anti-Siphon Hose Bibs Into A Normal Garden Hose Connection That Won't leak! We Make 4 Models to Fit Most Spigots - MAKE SURE YOU MEASURE BEFORE ORDERING!.
- SM01 ~ Works on Arrowhead Spigots When You Can Remove the Entire Vacuum Breaker. External Threads on Spigot are 1.05" in Diameter, Internal Threads on Adapter are 1.0" in Diameter.
- SM01.125 ~ Works on Some Arrowhead Spigots Directly or Bottom Half of Vacuum Breakers with Part Number ABP 486 BFP. WILL NOT FIT ABP 59 BFP!! External Thread Diameter of Spigot Measures 1.17". Internal Diameter of Adapter is 1.125".
- SM-XL ~ For Watts & Cambridge Brass Spigots Widely Used in Canada as well as NIBCO 63CLVB/763CLVB with VBS-12-ASSE Adapters External Thread Diameter of Spigot Measures 1.22". Internal Diameter of Adapter is 1.17".
- SM-XXL ~ Fits Watts NF8 EDP #0061854, NIBCO & Other Spigots Where the External Thread Diameter of Spigot Measures 1.3". Internal Diameter of Adapter is 1.25".
Check Stock
Beverage Dispenser Replacement Spigot, SUS304 Stainless Steel 5/8" or 16mm, Polished Finished, Dispenser Replacement
- Easily and Quickly Installation: This Beverage Dispenser Replacement Spigot requires a 5/8 inch or 16 mm diameter opening for installation. It is suitable for dispenser walls up to 11/16″ or 17 mm thick..
- Premium Quality and Healthy: The Stainless Steel Replacement Spigot is made of high quality fine food-grade #304 stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
- Multi-Function: Beverage Dispenser Replacement Faucet is ideal for dispensing tea, kombucha, wine, water jugs, mason jars and beverage containers. Suitable for all Berkey stainless steel models. Not suitable for Berkey Light..
- Easy to Clean: The Dispenser Replacement Spigot provides steady flow of your beverage and do not clog after easy installation. You can rinse thoroughly by clean water before use or clean it by dishwasher..
- LIFETIME GUARANTEE AND WARRANTY: If you don’t like our Beverage Dispenser Replacement Spigot at any time for any reason, will will give you your money back immediately. We stand behind all of our products without reservation, and we use them in our home every day..
Check StockAnchor Hocking Heritage Hill Glass Beverage Dispenser with Spigot, 2 Gallon
- Large capacity 2-gallon Anchor Glass beverage dispenser with spigot and glass lid.Overall Height – Top to Bottom: 10.3″,Overall Width – Side to Side: 14.3″,Overall Depth – Front to Back: 13.7:,Overall Product Weight: 10.75 lbs.
- Avoid sudden temperature changes and impact. Not for use with hot liquids. Genuine Anchor Glass design features thick side walls for added durability and stability.
- Anchor Glass is a healthier choice over plastic storage.
- glass does not discolor, retain smells, or leach chemicals into food.
- oversized glass knob designed for ease of use.
- spigot can be removed for easy hand washing.
Check Stock 
