Reviews Four jaw Self centring Chucks

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

  • Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
  • Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
  • pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
  • #1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
  • #2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
  • With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
  • including bowls, spindles, pens, other small turning projects, and much more.
  • Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

EDEALYN® Single Seat Without Backrest PU Leather Bench Seat Covers Car Seat Cover - Car Seat Back Seat Protector 1pcs  (Dark Grey)

  • ...r can match the original leather seats perfectly, Wrapped Edge Design for Better Protection,protects your original rear seat from wear and tear.It protects against seat wearing, indentations, scratches,increase the service life of seat.It can make your seat look new..
  • SECURE & NON-SLIP - The non-slip bottom, durable chucks and wrapped edge securely fix the back car seat cover stay in place. It reserves the position for seat belt locks.Both sides of seat cover with wrapping design shows rich in stereoscopic vision, increase the service life of seat,Comfortable seat cover,Damage resistant, durable.
  • HEALTHY MATERIAL - Made of high-quality PU leather, wear-resistant, breathable, soft and comfortable to touch, four seasons applicable. That's what these covers have done - new life to your near 10 year old vehicle.Waterproof and easy to clean..
  • EASY INSTALLATION - You can finish it about 5-10 minutes. Please place the chucks into the elastic bands, cover the seat cover on the right and left, insert the chucks into the seat gap, install the middle pad. If you have any questions about the installation, please contact us, we will help you..
Check Stock

DEWALT Masonry Drill Bit Set, Percussion, 4-Piece (DW5204)

  • 2 cutter carbide tip of masonry drill bit set maximizes carbide surface contact for longer bit life..
  • Four flute design cleans debris out for fast, efficient drilling.
  • Three flats on shank eliminate bit slipping in chuck (except DW5232, DW5233, DW5237, DW5238).
  • Rock carbide tip maximizes carbide surface contact for longer bit life.
  • Three flats on shank eliminate bit slipping in chuck.
  • Innovative tip reduces walking and increases accuracy.
  • Used primarily to drill holes for mechanical anchors, fits standard 3/8-inch and 1/2-inch chucks.
Check Stock

WEN DS164 20-Piece Sanding Drum Kit for Drill Presses and Power Drills

  • Features four sanding drums and 16 pieces of Sandpaper.
  • Perfect for your WEN drill press or your WEN 20V max Lithium Ion power drill.
  • Includes two 80-grit sanding sleeves and two 120-grit sanding sleeves in each size.
  • Four sanding drums measure in at 1/2-by-1/2 inch, 1-by-3/4-inch, 1-by-1-inch, and 1-1/2-by-2-inch.
  • 1/8 to 1/4-inch shanks fit in the majority of drill presses and power drill chucks on the market.
Check Stock

Stark 3PCS Aluminium Pipe Wrench Adjustable Jaw Plumbing Pipe Wrench (14\ 18\ 24\ inch) Pipe Wrench Set

  • Widely Application - Suitable for all pipe related home improvement repairs that need a tight grip, such as gas tank repair, household plumbing, vehicle maintenance. The deep grooved teeth of each straight pipe wrench lock in place to provide a confident grip around smooth, round surfaces like showerheads or bathroom sinks and drains.
  • Self-Cleaning Design - The pipe wrenches feature self-cleaning threads on the jaws and non-stick adjustment nuts that clean away grime from the hook jaw shank for reliable tool use.
  • Full Floating Forged Hook Jaws - The Stark pipe wrenches feature full floating forged hook jaws for superior gripping and quick adjustments when carrying out pipe work.
  • Lighter than Comparable Iron-Models - It delivers the unsurpassed durability and ease-of-use that all heavy-duty wrenches are known for.
  • 14" 18" 24" inch - The Wide Range of the Aluminum Straight Pipe Wrench is a plumbing wrench that offers professional strength and quality in a convenient, lightweight tool.
Check Stock

KNIPEX Tools 22-1/2' Knipex Cobra XL/XXL Pipe Wrench & Water Pump Pliers, Plastic Grip

  • Price For: Each No. of Jaw Positions: 20 Jaw Width: 2-5/8" Plier Jaw Style: V-Jaw Tether Capable: Standard Tool (Accessory Needed for Tethering) Includes: - Standards: DIN ISO 8976 Handle Type: Dipped Overall Length: 22" Jaw Length: 3-1/4" Plier Item: Tongue and Groove Pliers Material: Chrome Vanadium Electric Steel Adjustment Type: Push Button.
  • Plier Product Group: Pliers Insulated: No Finish: Polished(Head), Plastic Coated(Handless) Nonsparking: No Item: Water Pump Plier Max. Jaw Opening: 4-1/2" Features: Push Button Adjustment, Fine Adjustment, Self-Locking, Gripping Surfaces with Teeth Hardness Approximately 61 HRC, Box-Joint Design, Double Guide, Pinch Guard Country of Origin (subject to change): Germany.
Check Stock

Hymnorq 3/8 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 5pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, Perfect Drilling in Stainless Steel and Cast Iron

  • .../ high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING - The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 5PC SET - The set includes 5pcs of 3/8” diameter M35 grade cobalt steel twist drill bits, packed in a convinient and reuseable PVC case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock