Reviews Forming Abs Plastic With Heat Gun

DARENYI Black ABS Plastic Sheet, 12\ x 16\ 1/8\ Thick (3mm), Flexible Than Plexiglass Sheet, Moldable Than Acrylic Sheet, DIY Material for Home Decor, Craft Projects (2 Pack, Smooth & Textured Finish)

  • 【Package Content】 Size of per sheet: 12 x 16 x 1/8 inch (30 x 40 x 0.3 cm). There are 2 pack black ABS plastic sheets in the package. It's smooth on one side and textured on the other..
  • 【Thermoformable and Processed Easily】 Black abs sheet is easy to thermoform, just heat it to 93℃ (around 200℉) then make it bow to the angles you want, and hold the shape until it cools down. It can be cut easily with table saw, jigsaw, water-jet at room temperature, bent and shaped easily under heating with heat air gun, boiling water. If you need smooth surface on its 2 sides, you can sand the textured finish with sand paper..
  • 【Flexible and Solid】ABS plastic sheet is of good impact resistance, and can be bent within reasonable angles when bearing force, then recover when the force is gone. Compared with plexiglass sheet, ABS sheet is shatterproof and sturdier..
  • 【Multipurpose Use】ABS plastic sheet can be applied for car, home decor, building model, electronic device, robotics competition. Great for making switch panel, drawer divider, waterproof application, etc..
  • 【Features】Good impact resistance, stability, dyeability, easy to thermoform and process. High mechanical strength, low water absorption, good corrosion resistance, harmless and odorless....
Check Stock

10 Pack White ABS Plastic Sheet 12 x 16 x 0.06 Inch, Flexible, Moldable Than Acrylic Sheet, DIY Materials for Home Decor, Handcrafts (Matte and Textured Finish)

  • Package Content: there are 10 packs of white ABS plastic sheets in the package.
  • Size of per sheet is about 12 x 16 x 0.06 inches/ 305 x 406 x 1.5 mm.
  • Flexible and Thermoformable: ABS plastic sheet is of good impact resistance, and can be bent within reasonable angles when bearing force, then recover when the force is gone.
  • Compared with acrylic sheet, ABS sheet is shatter proof and flexible to satisfy your daily use.
  • And it is easy to thermoform, just heat it to 93 Celsius (around 200 Fahrenheit) then make it bow to the angles you want, and hold the shape until it cools down.
  • Easy to Process: such moldable plastic sheet can be cut easily with table saw, jigsaw, water jet at room temperature, bent and shaped easily under heating with heat air gun, or boiling water.
  • If you need a smooth surface on its 2 sides, you can sand the frosted finish with sand paper.
  • Matte and Textured Finish: the ABS plastic sheet features matte and textured finish surfaces, convenient for you to choose according to your actual needs.
  • You can also sand the textured finish with sand papers, easy to use.
  • Multipurpose Use: it is a DIY material when applied to home decor, handcraft artwork display, photography and so on, you can make switch panel, laser engraved signage, drawer divide....
Check Stock

Heat Vinyl Shrink Gun Kit- 650W Portable Digital LED Display Temp Adjustable Auto Cool System Hot Air Pen Electrical Solder Heat Gun for DIY/Crafts/Shrink Wrapping/Vinyl Wrap/Wire Connectors

  • ✔ Heat Vinyl Shrink Gun Kit-650W Portable Digital LED Display Temp Adjustable Auto Cool System Hot Air Pen Electrical Solder Heat Gun which heat up quickly and works like a charm.
  • ✔【Lightweight and Non-Slip Design】This LED digital display heat shrinkable gun offers less fatigue for holding.The external bracket allows it stand stably for hands-free operation which can help you move flexibly in large work area.
  • ✔【Advanced Dual-Temp Settings】This heat gun can be switched freely between the low setting of 212°F (100°C) and high of 896°F (480°C) with button,which ensures that this hot gun can be adjusted for satisfying all your utility.
  • ✔【Auto-Cooling and ABS Resistance Burning】Built in circulation system,automatic cooling after switch off,protect equipment and prolong service life.Made of ABS which has some functions such as heat resistance,low temperature resistance and so on.
  • ✔【WIDE APPLICATION AND IDEAL FOR DIY】This resin heat gun includes one concentration nozzle for directing the high heat flow to the work surface,which is ideal for shrinking tube,bending PVC pipe, electronics repairing,wrapping vinyl,embossing,stripping paint,loosening rusted bolts as well as other drying and thawing purpose.
Check Stock

Mini Heat Gun Dual-Temperature 392℉ & 662℉ Hot Air Gun Multi-Purpose Electric Heating Tools Shrink Pen for Crafts, Shrinking PVC, DIY, Embossing, Stripping Paint

  • 【Long Cable Enough for Crafting】4.9ft long cable ! ! hot air shrink gun was made of high-quality stainless steel inside and ABS plastic outside, Mini Dimensions 220*50mm/ 8.66*1. 97in.
  • 【Fast Heating】The temp of the nozzle could reach 200°/300° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life.
  • 【Dual Temperature】Our heat gun has two temp settings, the low heat setting for delicate or detailed work and the high heat setting for heavy-duty or high-volume work.
  • 【Wide Applications】Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
  • 【100% Satisfaction Guarantee】 Full refund or return guarantee. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
Check Stock

3 Pcs Mini Heat Gun Handheld Black Hot Air Gun for DIY Crafts Embossing 300W Portable Heat Shrink Gun Compact Heating Gun Rubber Stamp Heat Tool for Shrink Wrapping, Drying Paint, Clay, Cup Turner

  • Fast Heating, High Temperature: this heat gun for crafts has a power of 300W, a fast heating rate, and the temperature can reach about 200 degrees Celsius, and the rear vent can reduce the internal high temperature and prolong the service life, suitable for voltage 110V.
  • Size Information: the mini heat gun is about 8.86 x 1.85 inches/ 22.5 x 4.7 cm, and the wire length is about 39.37 inches/ 1 m, small in size and comfortable to hold, easy to use, suitable for beginners and experienced people.
  • Quality Material: this hot air gun with plug wire for power supply, built in bracket, adopting quality stainless steel inside and ABS plastic outside, with simple in design and reliable in quality.
  • Elaborate Design: stainless steel circular air outlet design makes the hot air blow out by the heat shrink gun uniform and the temperature stable, which is convenient for you to remove bubbles in epoxy resin or acrylic casting paint.
  • Wide Application: this craft heat gun tool is suitable for shrink wrap packaging, DIY embossing, watercolor dryer, drying paint, paper, DIY cups, rubber stamp and more, built in bracket for convenient to self support and tabletop use.
Check Stock

300 Pieces Clear POF Shrink Wrap Bags 3 Sizes Heat Film Wrap Set Home Supply for DIY Storage Packaging Photo Frames Soap Book Candles Oil Bottles (2 x 4 Inches, 4 x 8 Inches, 7 x 10 Inches)

  • ...holding.The external bracket allows it stand stably for hands-free operation which can help you move flexibly in large work area.
  • ✔【Advanced Dual-Temp Settings】This heat gun can be switched freely between the low setting of 212°F (100°C) and high of 896°F (480°C) with button,which ensures that this hot gun can be adjusted for satisfying all your utility.
  • ✔【Auto-Cooling and ABS Resistance Burning】Built in circulation system,automatic cooling after switch off,protect equipment and prolong service life.Made of ABS which has some functions such as heat resistance,low temperature resistance and so on.
  • ✔【WIDE APPLICATION AND IDEAL FOR DIY】This resin heat gun includes one concentration nozzle for directing the high heat flow to the work surface,which is ideal for shrinking tube,bending PVC pipe, electronics repairing,wrapping vinyl,embossing,stripping paint,loosening rusted bolts as well as other drying and thawing purpose.
Check Stock

HERZO Mini Heat Gun 350W,Handheld Hot Air Gun,for DIY Craft Embossing Shrink Wrapping PVC Drying Paint Clay Rubber Stamp（Blue）

  • Simple and durable:About 2m Long cable,Facilitate your long-distance work.Made of high quality ABS plastic outside and stainless steel inside,....
  • Versatile:This excellent compact heat gun can be used for heating shrinkable film,embossed powder,rubber stamp,embossing powders,vinyl wrap,HTV,epoxy....
  • Telescopic bracket:The heat gun also has a retractale stand,allowing for hand-free operation when our projects requires two hands.Free your hands..
  • Dual temperature:Its simple,pencil-like design features dualhigh(662F/350℃)and low (392F/200℃) temperature settings with a concentration nozzle to....
  • Precautions:The hot air gun will reach a very high temperature during use,please pay attention to safety during use.Please don't use it continuously....
Check Stock

(8-Pack) CalPalmy ABS Plastic Sheets (Black) - 16” x 12” x 1/16” Plastic Sheet - Textured (Front) and Matte (Back) Surfaces - More Flexible and Moldable Than Acrylic Sheets - for Crafts and Decors

  • BLACK ABS PLASTIC SHEETS - This is a pack of 8 pieces of black ABS plastic sheets. Each ABS plastic sheet is 16 inches long by 12 inches wide by 1/16 inch (0.06 inch) thick.
  • TEXTURED AND MATTE SURFACE FINISHES - There are two different surface textures on each sheet. The main surface has a rough surface while the back surface is matte and smooth. It’s also possible to sand the textured surface for a finer finish.
  • PERFECT ALTERNATIVE TO ACRYLIC SHEETS - ABS plastic sheets are ‌more flexible and easier to mold than Plexiglass or generic acrylic sheets. Not only are they more flexible, but they’re also shatter and crackproof.
  • THERMOFORMS AT 200℉ - You’ll only need a heat gun to bend, form, or mold these ABS plastic sheets. They can bend into narrower and wider angles and hold shape very well as they cool.
  • VERSATILE USE PLASTIC SHEETS - The variation in texture lends an interesting detail that’s perfect for both decorative and functional applications. From crafts and decors, to signage, boxes, and panels.
Check Stock

ECOTRIC Plastic Door Panel Insert Covers Compatible with 2005 2006 2007 2008 2009 Ford Mustang Black

  • This item is a ABS PLASTIC DOOR INSERT COVER REPLACeMENT to be glued on door after removing factory vinyl pieces..
  • Compatible with 2005-2009 Ford Mustang Models with Cloth/ Vinyl Insert..
  • Made From Durable ABS Plastic And Vacuum Molded For Perfect Fit..
  • Package Included - 1 Pair Interior Replacement Door Panel Insert & Silicone adhesive. It is recommended to use HEAT GUN or do some triming to fit perfectly..
  • If your items encounter any adaptation and color difference or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you,we will reply in 24 hours..
Check Stock