Reviews Ford Fueline Tool

kweiny Transmission Fluid Fill Adapter for Ford 5R55W and 5R55S

  • Main Usage: As a connector for car oil pan ATF filling tool.
  • Compatibility: Compatible with Ford 5R55W & 5R55S Automatic Trans,.
  • Applicable models: 2003 and newer Explorers, And other car models used 5R55W & 5R55S Trans.
  • Same as Ford Tool No. 307-437, It is designed adds a barb to prevent the hose from slipping.
  • Material: low-carbon steel, Surface black oxidation antirust treatment..
Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

  • 43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
  • 43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
  • 43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
  • 43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....
Check Stock

Orion Motor Tech Engine Timing Tool Kit, Crankshaft and Camshaft Timing Belt Locking Alignment Tool Set Compatible with Ford Focus Escape Transit Volvo S60 S80 V60 V70 More for 1.5L 1.6L VCT Engines

  • TUNE-UP TIME: When your Ford or Volvo engine feels unstable or has weak acceleration, it's time to roll up your sleeves and use this Orion Motor Tech tool kit to hold your vehicle's timing system at top dead center while you check, fix, and replace other components.
  • PREMIUM MATERIALS: Our tools are made with 45# steel and AISI A3 heat-treated steel for maximal strength and corrosion resistant longevity, so you can reliably get your engine running like new.
  • the blow molded ABS storage case ensures easy organization, storage, and transport.
  • WIDE COMPATIBILITY: These engine tools are compatible with a large range of 1993 to 2000 Ford cars, including the B-MAX, C-MAX, Focus, Fusion, Ka+, Mondeo, S-MAX, Tourneo Connect, Tourneo Courier, Transit Connect, and Transit Courier as well as Ford EcoSports (2012-2020), Escapes (2013-2018), Fiestas (1995-2020), Galaxies (2006-2020), Kugas (2012-2020), Pumas (2000-2002), and Transits (1977-1986).
  • the tool kit is also compatible with late model Volvo S60s, S80s, V40s, V60s, and V70s (2010-2020).
  • EASY TO USE: This OEM-equivalent engine timing belt tool set includes a sprocket locking tool, a camshaft alignment plate, camshaft setting bar, crankshaft pulley alignment tool, crankshaft timing peg, and all the pins necessar....
Check Stock

Robinair 10986 Orifice Tube Service Kit for Ford and General Motors vehicles

  • Automotive A/C orifice tube remover tool kit allows removal of orifice tubes before flushing.
  • Speeds A/C service by removing the build-up of particulates on the orifice screen and restrictions that slow the flushing process.
  • The basic tool works on General Motors and Ford vehicles and comes with additional adapters for specific applications.
  • Ford: extender body for 1985 and newer models.
  • General Motors: 1989-91 GM 'J', 'L', and 'N' car adapter, and 1991 and newer 'C' and 'K' series truck adapter (for trucks with No. 3096068 orifices).
Check Stock

lesolar Trailing Arm Bushing Tool Kit Suspension Control Arm Bushing Tool Kits Rear Bushing Removal Tool Kit with Storage Carrying Case Suitable for The Ford Focus Bushing Removal MK1 1998

  • 【Application】Control arm bushing tool kit has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, Mazda 5 CR, CW, MPV 2005, V50 2004-2012, S40 MK sedan 2003-2012..
  • 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization..
  • 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you ....
Check Stock

OTC 6660 Compression Tester Adapter for 2003-2006 Ford 6.0L Diesel Engines

  • OTC Ford Diesel Engine Compression Test Adapter.
  • For use with OTC's No. 5021 diesel engine compression gauge.
  • This adapter is used to connect the No. 5021 gauge to a glow plug port (after the glow plug has been removed) for performing a compression test.
  • Fits 2003-2006 Ford pickups and vans with 6.0L diesel engines.
  • high-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock

Yuesstloo Camshaft Holding Tool Kit with Tension Tool, Timing Alignment Holder Tool for Ford 3.5L & 3.7L 4V Engines, Replace 303-1248 303-1530, with Portable Case and Gloves

  • Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain..
  • Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682.
  • Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store..
  • Made of high-quality steel and coated with black oxide finish, anti-rust, wear-resistance and durable, with high hardness, high precision and great compatibility..
  • 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..
Check Stock

Veepeak OBDCheck BLE+ Bluetooth 4.0 OBD II Scanner for iOS & Android, Car Diagnostic Code Reader Scan Tool for Universal OBDII / EOBD Vehicles

  • ➤【FULL-SYSTEM CHECK ON FORD LINCOIN MERCURY】The latest version AUTOPHIX 7150 Ford scan tool offers you a comprehensive diagnosis on all systems, such Engine, ABS, SAS, EPB, BAT, ETC, KAM, IQA, DPF Parameter Reset, Transmission Learning, it can help you read and clear trouble codes. The car diagnostic scanner also gives you the information about data,vehicle issues located and further addressed efficiently and accurately..
  • ➤【POWERFUL SPECIAL FEATURES】AUTOPHIX 7150 Ford have Battery Registration, Oil Light Service Reset,ABS Service Bleed,Reset PCM KAM,Clear Crash Data Memory,SAS Calibration,Fuel Injector Correction Factors,DPF Parameter Reset,Transmission Tables Reset,Clear EGR Adaptive Tables,Fuel Injection Pump Learn,IQA, Diesel Particulate Filter Static Regeneration,etc.include many special functions of resetting/ correcting, plus multilingual menu Options and code definitions..
  • ➤【FULL OBDII DIAGNOSIS】 AUTOPHIX 7150 Enhanced OBDII scanner can read and erase the trouble codes that can cause emission problems with your vehicle, turn off the MIL (check your car engine) and I/M readiness , read data stream, vehicle identification Info (VIN, CIN, CVN). Built in a DTC lookup library you can find the related code definitions to help you det....
Check Stock