Klutch 150 Spool Gun Kit - fits Klutch MIG250S, MIG140Si and MIG/Stick 220Si Welders
- Your purchase includes – 10 ft. HR-100 gun | 10 ft. work cable with clamp | .030” contact tips | Power cord with plug | Welding guide and material thickness gauge | Owner’s manual with installation, operation and maintenance guidelines.
- Specifications: Input voltage – 230V 60Hz | Amp range – 25-190 amps | Duty cycle – 30% at 130 amps | Mild Steel thickness range – 24 ga. 5-/16” | Spool radio diameter inner/outer – .62”/1.95” | Max spool capacity – 11 lbs. | Power cord length – 6 ft..
- 7 voltage selections, enhanced magnetics and infinite wire feed speed control offers easier fine control of the output parameters for improved arc performance with less spatter.
- You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
- Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire | Protects power transformer from thermal overload to provide you maximum reliability.
Check StockTOOLIOM E71T-GS .030\ Diameter 2-Pound Spool Flux Core Self-shielded Carbon Steel Mig Welding Wire for TL-135M TL-250M Pro
- AWS E71T-GS Self Shielding Gasless flux cored welding wire .030” Diameter, 2 Pound Spool.
- Self-shielded: No need for external gas or flux.All positions, Single and multi pass welding..
- Good penetration, Less splash, Beautiful weld bead appearance , Easy slag removal.
- Great for Welding Outdoors or in Drafty Conditions.
- To be used on TOOLIOM TL-135M,TL-250M Pro MIG Welder (Flux Core MIG Welding).
Check StockTOOLIOM E71T-GS .035 Diameter 10-Pound Spool Flux Core Self-shielded Carbon Steel Mig Welding Wire for TL-200M TL-250M Pro
- AWS E71T-GS Self Shielding Gasless flux cored welding wire .035” Diameter, 10 Pound Spool.
- Self-shielded: No need for external gas or flux.All positions, Single and multi pass welding..
- Good penetration, Less splash, Beautiful weld bead appearance , Easy slag removal.
- Great for Welding Outdoors or in Drafty Conditions.
- To be used on TOOLIOM TL-200M,TL-250M Pro MIG Welder(Flux Core MIG Welding).
Check Stock
display4top Portable No Gas MIG 130 Plus Welder Flux Core Wire Automatic Feed Welding Machine,DIY Home Welder w/Free Mask - 110V
- ★Flux-Cored Wire, Gas Less Welder - Display4top MIG 130 welder machine uses convenient Flux-Cored Wire.Automatic Thermal Safety Protection,suit for welding carbon steel,aluminum,stainless steel etc..
- ★Strong & Durable - Compact and exquisite MIG welder, made of heavy duty stainless steel body, painted with durable red paints, ensure its long-last serving life-span, a strong and durable welding machine for your long term use..
- ★Overload Safety Protecyion - MIG 130 PLUS welder come with a safety feature where the welder is automatically turned off when it it too hot or the volt and current exceed their range. This function will keep you and your welder safe. Internal fan-cooling system,there are fans helping to cooling the welder when working..
- ★Wide Applications - Portable design light weight, easy for translation and storage. Comes with a comfortable hand grip, making it easy for you to carry anywhere you want.It is perfect for home DIY and general repairing work..
- ★Accessories Included - 1x welding gun with on/off safety contro,1 x grounding clamp,1x brush , 1x protection mask and several other small accessories.
Check Stock
(2) REFLECTIVE RED - Safety First Hard Hat Stickers (Pair) | OSHA Helmet Decals | Toolbox First Aid Labels | Glow Bright Union Laborer Welder Fall Protection Confined Space Trained
- ...ed IGBT Technology: Our MIG-130 adopts the most advanced IGBT inverter technology with excellent arc stability. Rated output current: 130 Amps. Output current range: 40 - 130 Amps. Suitable for welding carbon steel, iron, stainless steel, and other metals..
- Convenient Flux Cored Wire: This mig tig stick welder can use flux-cored welding wire and solid welding wire. Feeding speed adjustment range: 8.20 - 42.65 ft/ min. MIG welding wire: 0.024 - 0.031 in. Included welding wire: 1 kg. It is the perfect entry-level welder choice..
- Easy Control Panel & 3 In 1: MIG welding machine has MIG MMA TIG mode. The welding machine has included with function switching buttons and a current-voltage control knob, the intelligent digital display makes the operation easier for you..
- Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload.
- it is protected against splashing water, with a protection level of IP21, which has good water resistance..
- Compact and Portable: Lightweight 28.7 pounds,....
Check Stock
WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger
- Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
- Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
- Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
- Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
- brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
- U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock
100Pcs Aluminum Welding Rods Easy Melt Aluminum Welding Wire Low Temperature Solution Flux Core Welding Rod 1.6MM*33CM (1/16in x 13in)
- NO SOLDER POWDER NEEDED -- The aluminum rods are flux cored welding rods,so there is no need to use other flux powder. They can only be used to weld aluminum..
- HIGH QUALITY MATERIAL: The aluminum repair rods with flux are made of aluminum material, nontoxic, odorless and durable material..
- PERFECT WELDING EFFECT: The aluminum welding rods for propane torch are designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance..
- ONLY FOR WELDING ALUMINUM -- The solution welding flux-core rods are suitable for argon arc welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good for geability & good corrosion resistance..
- WARRANTY -- If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock
100PCS Aluminum Welding Rods Low Temp Easy Melt Aluminum Welding Wire Flux Core-Only Wuitable for Welding Aluminium (0.16 x 33cm/0.06 x 13in)
- 【NO SOLDER POWDER NEEDED】The aluminum welding rods are flux cored welding rods,so there is no need to use other flux powder..
- 【HIGH QUALITY MATERIAL】The aluminum welding rods with flux are made of aluminum material, nontoxic, odorless and durable material..
- 【PERFECT WELDING EFFECT】The aluminum welding wire for propane torch are designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance..
- 【NOTES】The solution welding flux-core rods are only suitable for argon arc welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good for geability & good corrosion resistance..
- 【WARRANTY 】If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..
Check Stock100 Pieces Flux Core Aluminum Rods Low Temperature Easy Melt Aluminum Welding Rods Welding Sticks
- NO SOLDER POWDER NEEDED: These aluminum rods are flux cored welding rods, no need solder powder, no other materials are required, and it is easy to....
- HIGH QUALITY MATERIAL: The low temperature aluminum brazing rods with flux are made of aluminum material, nontoxic, odorless and durable material..
- PERFECT WELDING EFFECT: These aluminum welding rods has great welding effect, with low melting point, great weldability and corrosion resistance, high....
- WIDELY USE: The easy melt aluminum welding sticks are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and....
- AFTER-SALES SERVICE: For any reason, if you are not satisfied with your purchase, contact us directly and we will solve it for you immediately..
Check Stock 
