Reviews Fluid Connector

Modengzhe 3.3Ft Length Universal Windshield Washer Fluid Hose with 4 Pcs Hose Connectors for Car (7mm Hose OD x 4mm Hose ID)

【PACKAGE】1 x 3.3Ft Windshield Washer Fluid Hose.
【DIMENSION】Approximately 3.3ft/1.0M in lenght, with 7mm hose outer diameter & 4mm hose inner diameter..
【FUNCTION】Connect the water tank and the water nozzle to spray the glass water smoothly to clean the windshield glass quickly..
【COMPATIBILITY】Interchangeable with most windshield washer hoses. Please confirm the size and length before purchase..
【PLEASE PAY ATTENTION】We do not sell the brands metioned above and below, all the known brands we mentioned just for compatibility reference only, please be aware..

EZ-Fluid Stainless Steel Corrugated Flexible Natural Gas Hose Connector Suppy Line Has Yellow coated polymer exterior for extra protection and flexibility.
EZ-Fluid 3/8" FIP or 1/2" MIP x 1/2" FIP Stainless Steel Corrugated Yellow Epoxy Coated Gas Flex,Flexible Natural Gas Connector Hose Supply Line. CSA certified and ideal for indoor and outdoor use.
Comes with MIP and FIP flare fittings. Fits on 1/2" FIP Gas valve or 1/2" Flare x 1/2" FIP Gas Valve,Male end Flare Fitting come with 1/2" NPT outter Thread and 3/8" NPT inner Thread..
Application For residential/commercial tank and Gas tankless ,Hot water Gas heater, boiler, fryer, stove,Dryer,Range,Gas Pipe ,Fire pit ,Grill and more.
The corrosion-resistant yellow coating protects the product from exposure from harsh weather and certain chemicals.

Corsair Link Integration for monitoring performance and adjustment of fan speed and multi-rail/single rail mode.
80 PLUS Platinum efficiency, delivering 92% energy efficiency at real world load conditions..
ZeroRPM mode for fanless operation at low loads and outstanding noise reduction..
140mm thermally controlled fluid dynamic bearing fan spins up as needed.PATA Connector:12.
Fully Modular low profile cables for easy installation, less clutter, and helps maximize airflow through your computer's chassis.SATA Connector:16.
Ten year warranty: Your guarantee of reliable operation that will last across several system builds.

Stainless Steel Braided Supply Hose Line Faucet Connector.
EZ-Fluid 24-Inch 1/2" FIP X 3/8" Comp Stainless Steel Braided Faucet Supply Line Connector,Faucet Water Supply Hose Connector Lines Facuet Water Supply Line For Bathroom,Kitchen sink Facuet.

Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
Pump does not cycle on/off and provides quiet, smooth operation.
it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
Precision-machined billet-aluminum injector with integral check valve.
three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
tank-less 35 PSI Boost dependent gas water/methanol system.

【Compact but Durable】: Constructed from Aluminum for durability while minimizing weight, this fluid head tripod folds to 23.6" and supports up to 13.2 lb, making it suitable for DSLR rigs, compact camcorders, and digital cinema cameras.
【Pan Tilt Head】: With an easy link connector for accessories, fluid head pan/tilt locking with a fixed-length detached pan bar, offers 360° panning and +90° / -50° tilt.
The 60mm flat base mount with a standard 3/8'' thread makes the head versatile for most tripod, slider, jib or crane.
【Easy Set Up】 the 4-section aluminum tripod leg extends to a maximum height of 75.2", equipped with ergonomic flip locs which snap open and closed to ensure fast operation.
【Multi-functional Use】: With 180° upward-folding legs, easily converts to a monopod by combining the center column with the detachable tripod leg.
Reversible center volumn or short split-column especially ideal for macro and close-up photography.
【Specifications】: 13.2 lb Loading Capacity | 11.2" to 75.2" Height Range | Tilt Angle +90° / -50° | 360° Panning | 60mm Ball Diameter | Fluid Head | Video Tripod Leg | Carrying Bag.

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

【Compatible】This Washer Fluid Hose is Suitable for Most Cars SUV Off-Road Pickup Truck Autos Washer Fluid Tubing. Easy to replace and install..
【Efficiently Usage】This windshield washer hose connector kit is connected to washer wipers to make your windshield brand new..
【Universal Fit】300cm/118inch long,inner 4.3 mm and outer 6.8 mm in diameter.Precise design for secure mounting on wash pumps,connectors and nozzles..
【12 Pcs Hose Connectors】Made of high quality rubber, structure strong and ruggedly built to last years. Includes 3 Kinds of Shapes: 4x Y Type Connectors, 4x I Type Connectors, 4x T Type Connectors, meeting your various requirements..
【Packing List】1pc of300cm/118inch windshield washer hose,12pcs of windshield wiper hose connectors (4pcs T type.