Reviews Flooring For Attic 2

Werner 55-1 Attic Ladder Replacement Hinges

  • Werner 55-1: Fits all Werner made attic ladders 2006 and Older..
  • If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder..
  • The 55-1 includes (2) hinge arms, Hardware, & Instructions..
  • Pivot Plates are not included with the 55-1..
  • Use existing pivot plates or don't use them at all, more information in the 55-1 instructions..
Check Stock

Attic Tent at-4 Attic Cover / Insulator 25\ x 54\ x 13\ Rough Opening

  • Fits attic ladders with a 25" x 54" opening and 1x5 or 1x6 side rail.
  • Insulates folding attic stairs, knee wall doors, and attic scuttle holes.
Check Stock

Attic Stairs Insulation Cover 25'x54'x11', Attic Door Insulation Cover, R-Value 15.5 Attic Hatch Insulation, Class A Fireproof Attic Tent Ladder Insulation Cover Kit

  • 【ALL-YEAR ENERGY SAVING】- LEMOONE Attic Door Insulation Cover blocks the air and heat exchange between the room and the attic. Keep your house cold in the summer and warm in the winter, reduce energy consumption, saving your utility bill..
  • 【QUICK TO INSTALL】- Unfold→Insert→Fit it! Just 3 steps to install your attic door insulator easily. Get a great seal attic door with this attic tent cover now..
  • 【EASY TO ACCESS】- Zipper access and low opening design, allow your climb up and down the pull-down door to be safer and easier. The attic stairway insulation cover fits attic openings up to 25″ x 54″ x 11″..
  • 【UPGRADED PERFORMANCE】- This attic tent cover reflects 97% of radiant heat, R-Value of 15.5. It’s composed of heat-insulating bubbles and two layers of thickened foil, which is waterproof and fireproof..
  • 【WHAT YOU GET】- Attic door insulator * 1, installation manual * 1. Warranty service to solve your problems at any time * 24 months. Attic door covers build protection for your house all year!.
Check Stock

Pull Down 12 Steps Attic Stairs, Wall Mounted Alloy Attic Access Ladder, Folding Retractable Attic Loft Ladder with Armrests for Home Building Supplies, 11.5 feet Height

  • 【Wall-Mounted Ladder】: This loft wall attic ladder is wall mounted type. The size of the folded attic folding ladder is only 23.6 x 27.6 inches, which won't take up too much area, so it is very space-saving. The folding stairs can not be installed on the ceiling and pulled down from the ceiling and the lightweight folding step ladder should be installed on vertical wall or a vertical plane..
  • 【Space Saving】: Maximum vertical height stretched out is 2.7m-2.8m. The width of these stair pedals is 43cm/16.93in. The flexible S-shaped strings and springs at the loft folding ladder level provide you with easy folding and unfolding. The widened pedals make attic pulldown stairs easier for you to walk up and down the stairs, making it safer..
  • 【Excellent Load-bearing Capacity】: The attic folding ladder is made of an S-shaped steel stamping plate and thickened aluminum-magnesium alloy treads provide it with a maximum load-bearing capacity of 881.84 pounds. But the pull down attic stair does not mean that this loft wall ladder can stand on several people at a time. For your safety, you should go up one by one..
Check Stock

Acacia Hardwood Interlocking Deck Tiles - Walnut Straight - 12\×12\ 9pcs - Floor Tiles for Patio and Deck Use Natural Wood Outdoor Decking and Flooring, Rain and Weather Resistant, Heavy Duty

  • [Install Flooring without Damage]: The Deadwood Crafted Tools Laminate Floor Jack Laminate Flooring Installation Kit brings crooked, warped, or bowed flooring strips into place for fixing and holds them in place during installation.
  • Flooring jack laminate jack is not for lifting.
  • [For Any Floor Thickness]: Laminate flooring jack features universal adjustable length from 14 to 16.7 inches (35.5-42.5cm).
  • 13 x 0.9 x 0.6-inch (33 x 2.4 x 1.4cm) rack.
  • 1.1 x 4.25 x 1.9-inch (2.9 x 10.8 x 4.8cm) rack plate.
  • 3.9 x 8 x 0.2-inch (9.8 x 20.3 x 0.5cm) lifting plate.
  • [Easy to Use]: Place flooring wall jack against wall or wall-stud.
  • Use locking ratchet to push or pull flooring strips into place (ratchet downward to force, push lever up or forward to release gear drive mechanism).
  • [Prevent Injury]: Keep hands free when nailing hardwood flooring with floor jack hardwood jack.
  • Nail or glue down flooring strip when starting at straight line.
  • Additional force can be applied if straightening.
  • To release flooring jack install for wood, raise handle fully forward to disengage pawls and manually retract bar.
  • [Quality You Can Trust]: No need to worry about professional hardwood floor jack falling apart under pressure.
Check Stock

Retro Self Adhesive 12-Inch Vinyl Floor Tiles, 20 Tiles - 12\ x 12\

  • PACK OF 40 FOR LARGER AREA FLOORING-Save your time to find perfect gaps of 1/2 or 1/4, making flooring installation high efficiently..
  • PREMIUM QUALITY & REUSABLE-This flooring spacer tool for flooring installation is made of quality ABS materials, superior durability, impact-resistant, and built to last and reusable..
  • EASY TO OPERATE & REMOVE-With it's triangle design, spacer blocks are more stable than rectangular/ wedge ones.Neccessary tools to get proper flooring expansion gap, commonly used for LVP/vinyl /hardwood planks/laminate/wood flooring.
  • UPGRADE FLOORING SPACERS-Featured quarter inch and 1/2 inch gap (8-15mm) in 1, MinliGUY floor spacers help you to install floors more smoothly. Simple to place the spacers, it will be stable at the wall..
  • WELL PACKED-Including 40Pcs floor spacers, ideal for amateur, home owner, contractor, or other professional use..
Check Stock

Tamarack Technologies HV1000 R38 Ductless Whole House Fan with Insulated Doors

  • QUALITY AIRFLOW - Tamarack Technologies’ HV1000 Whole House Fan allows you to avoid using your AC when the outdoor air is cooler than the indoor air. The attic exhaust fan pushes hot air, indoor air pollutants, allergens, moisture and odors out through attic vents or gables while pulling cool, fresh air naturally cooling your home and improving the indoor air quality..
  • SELF-SEALING DESIGN - The attic fan includes R38 insulated doors that open automatically when the fan is operating and seal shut automatically when the fan is off. The insulated door design prevents cool air from escaping your living area to the attic..
  • COST-EFFICIENT - Our whole house fans for home have insulated doors that prevent heat loss through the attic during the cooler months. Installing a Tamarack Whole House Fan reduces energy consumption and saves money. Our household ventilation fans use only 10% of energy a central air conditioning system uses and reduces your energy bill..
  • LONG-LASTING AND MADE IN USA - Made with durable metal material, this quiet cool whole house fan is covered by a lifetime manufacturer's warranty. The insulated door design prevents cool air from escaping your living area to the attic. This whole house attic fan operates at two speeds..
Check Stock

Ladder Werner 55-1 - Attic Spreader Hinge Arms - MFG 2006 and Older - (Pair)

  • Werner 55-1: Fits all Werner made attic ladders 2006 and Older..
  • If you don’t have a Werner attic ladder the 55-1 will not work on your attic ladder..
  • The 55-1 includes (2) hinge arms, Hardware, & Instructions..
  • Pivot Plates are not included with the 55-1..
  • Use existing pivot plates or don’t use them at all, more information in the 55-1 instructions..
Check Stock

Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators

  • THERMOSTAT/HUMIDISTAT CONTROL: The Dual Thermostat and Humidistat is designed for use with Power Attic Ventilators. The dual controls allow for a user to limit the operation of the fan based on user selected temperature and humidity levels..
  • ADJUSTABLE DUOSTAT: This item is often called a Duostat and is an essential tool for homeowners to regulate the temperature and humidity levels while preventing their power attic ventilator from running in continuous operation mode.
  • ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F..
  • DUAL HUMIDITY CONTROL: Adjustable Thermostat and Humidistat Control has 10 Amps, 120 Volts AC. Thermostat setting adjusts from 60 - 120 degrees F (normal settings are 85 - 110 degrees F). Humidistat setting adjusts from 30 - 90% (normal settings are 60 - 70% depending on local humidity levels). If either setting is too low, fan will run continuously. If setting is too high, ventilation will be inadequate. It has limited lifetime warranty..
  • REMOVAL OF HEAT: The Duostat allows for worry free operation during both winter and summer months by allowing the homeowner to not manually turn on and off their attic fan when needed. It remov....
Check Stock