Reviews Floor Jack Handle Replacement

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

Heavy duty 3 Ton Floor Jack Low Profile Hydraulic Jack Steel Service Jack Quick Rise With Double Pump Quick Lift

  • 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm).
  • Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue..
  • Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point..
  • Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle.
  • Low Profile jack complies with ASME PASE/2014 Safety Standard.
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

AFF 4 Ton Floor Jack - Dual Pump Hydraulic Car Lift System - Heavy Duty Capacity - 400SS

  • Capacity: Aff Floor Jack has 4 ton capacity, featuring a universal joint technology, giving you a more controlled descent.
  • Efficient and Quick-Lift: Floor Jack features a twin hydraulic system for faster and more efficient lifting. Pinned and padded saddle provides a quick lift and added vehicle protection.
  • Easy to Move: The rear mounted swivel casters provide easy maneuverability.
  • Easy to Store: 2-piece handle helps with positioning, pumping, and easy storage. Integrated parts tray keeps small components from getting lost.
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock

Torin AT83006B Hydraulic Trolley Service/Floor Jack with Extra Saddle Fits SUVs and Extended Height Trucks 3 Ton 6,000 lb Capacity Black

  • Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster.
  • Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8".
  • Ideal for most cars, trucks, vans, and....
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Extra long saddle neck saves time when lifting....
  • Single piston quick lift pump allows you to easily raise the jack to the desired height.
  • Safety bypass system prevents over-loading and ensures safe....
  • Built-in carrying handle allows for the floor jack to be lifted and moved quickly.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

Jack Reacher

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity.
  • Constructed of durable, high-strength steel.
  • Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
Check Stock