Forstner Bit Set, 5-Piece Forstner Bits Wood Drilling Smooth Flat-Bottomed Pocket Holes in Hard Soft Wood, 3/8" Shank Fit Drills and Drill Presses, Size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2"
- ...antly precise and can produce an extreme clean-cut hole with a flat bottom, diameter size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2" (25mm, 28mm, 32mm, 35mm, 38mm).
- Accomplish Variety of Boring and Cutting Tasks: Forstner Bits Set can be used in creative ways such as drilling holes for Dowels and cup hinges, making Overlapping holes.
- Precise & Clean: You can use these Forstner bits to create precise clean flat-bottomed and pocket holes without chip in hard and soft wood, polywood, plastic, and other materials.
- built with 3/8" shank compatible with both drill presses and handheld drills.
- Using Forstner bit with a drill press: get a clean and plumb hole with minimal effort.
- 1, Position and Mark the Workpiece and test if it’s even.
- 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it.
- 3, Lower the drill press speed when finish the hole.
- Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point & Align Drill.
Check StockRotary Hammer Drill, ENVENTOR 1-1/4 Inch SDS-Plus 12A Heavy Duty Demolition Hammer Drills Corded for Concrete Stone, Safety Clutch 4 Functions with Vibration Control, Grease, Chisels, Drill Bits, Case
- ⚒【MAX POWER PERFORMANCE】The powerful 12 Amp motor /1500 Watts of this rotary hammer drill with 6 Joules Impact Energy with SDS Plus function make you complete any projects on masonry, concrete, brick, stone, metal, etc. The 6-SPEED adjustable speed of heavy duty hammer drill can easily achieve 0-880RPM switching. ISQUECER.
- ⚒【FOUR MULTI-FUNCTION OPTIONS】Easily use the Knob can switch different modes of the motor arbitrarily (Drill, Drill+Hammer, Shovel, Hammer), suitable for a variety of work scenarios. The corded hammer drills for concrete and brickwork is 1-1/4 inch (32mm), wood 1-5/8 inch (40mm), steel 1/2 inch (13mm)..
- ⚒【SAFETY CLUTCH】Demolition hammer 1-1/4 inch safety clutch protection design protects your wrist when the sds drill hammer is subjected to high torque if the bit ever gets jammed while using it in any tasks such as brick chipping, tile, and floor removal, or even making holes in concrete, masonry, metal, or wood..
- ⚒【HUMANIZATION Design】 Enventor heavy duty rotary hammer drill has a 360° rotating handle that is suitable for different angles of work and reduces fatigue. The soft-g....
Check Stock16 Pieces Spade Drill Bits Set, 1/4 Inch to 1-1/2 Inch Carbon Steel Paddle Flat Bits for Woodworking Packaged in Wood Box
- 【APPLICATION】The sharp spade drill bit allows for accurate drilling to most types of wood, and also fiberglass, PVC (polyvinyl chloride) and soft metals such as aluminum. These drill bits offer expert drilling for large holes on wood with a flat head and strong center point..
- 【Size 】Includes 16-piece drill bits: 1/4” (6 mm), 5/16” (8 mm), 25/64” (10 mm) , 15/32” (12 mm), 35/64” (14 mm), 5/8” (16 mm), 45/64” (18 mm), 25/32” (20 mm), 55/64” (22 mm), 15/16” (24 mm)”, 1 1/32” (26 mm), 1 7/64” (28 mm), 1 3/16” (30 mm), 1 17/64” (32 mm)”, 1 3/8” (35 mm), 1 1/2” (38 mm).
- 【Universal】1/4 inch hex shank fits into all power tools easily and securely and it’s specially for locking into quick change chuck. It's universal for the most drill driver tool of brands in the markets..
- 【High Quality】Spade bits set is made of high carbon steel, with heat treated for durability, head with polished surface for longevity. Cutting edge with double side cutting spurs of high quality for durable and quick drilling effortlessly..
- 【100% SATISFACTORY SERVICE】Always committed to do our best to make sure our customers are satisfied about the purchasing of spade drill bits from us. If you have any questions, please feel free to co....
Check StockASNOMY 6PCS Large Size Forstner Drill Bit, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
- 【Top Quality】Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable;.
- 【Size】Drilling diameter:1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm)..
- 【 Sharp & Clean Holes】This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch).
- 【Widely Applications】Can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc..
- 【Warm Tips】Since we are all large-size Forstner Drill bit, it is best to use machines with good fixing performance for drilling operations, such as drilling machines, bench drills, vertical drilling machines and vertical electric drills, etc., if you must To operate with a hand electric drill, it is best to use it togeth....
Check StockCornesty 1-1/4 Inch Rotary Hammer Drill, SDS-Plus 12.5 Amp Heavy Duty Hammer Drill Vibration Control Safety Clutch, 6 Speeds,360°Rotating Handle, Including 3 Drill Bits,Flat Chisels, Point Chisels
- [POWERFUL FUNCTION] The rotary hammer drill has 1500W power, 7.4J impact force (5.5fts), impact frequency 0-4350BPM, 6-speed adjustable speed to achieve 0-880RPM switching, powerful working ability can be applied to concrete, metal, bricks Wait. Maximum drilling capacity: concrete 1-1/4 inches (31.78mm), wood 1-1/2 (38.1mm), steel 1/2 (12.7mm).
- [MULTI-FUNCTION & DUAL SWITCH] Rotary hammer drill has a multi-function design of drill, hammer and rotary hammer drill in one, which can adapt to a variety of work scenarios (concrete, metal, brick, marble and masonry, etc.).
- In addition, it has a single function Compared with the switch design, the dual-function switch design can extend the service life and improve the work efficiency..
- [VDT SHOCK ABSORPTION SAFETY DESIGN] The rotary hammer drill adopts VDT shock absorption technology, which can effectively reduce vibration and reduce arm fatigue. In addition, the rotary hammer drill uses a high temperature resistant pure copper motor, equipped with a multi-line heat dissipation design to prevent excessive temperature from damaging the motor.
- the dust-proof bottom structure can prevent dust from entering the motor, thereby extending the life of the hammer..
- [360°ROTATING HANDLE & SDS-PLUS CHUCK] The rotary ham....
Check StockDaily Treasures 34Pcs Pin Vise Hand Drill Set, Include Pin Vise Hand Drill with Bench Vise, 0.5-3mm PCB Mini Twist Drill Bits,5 Finger Covers in 3 Sizes and 2 Diamond Needle File for Craft Carving DIY
- 【Economic Affordable Hand Drill Set】-This hand drills set comes with 1 adjustable pin vise, 25 pcs twist drill bits in 9 different sizes(0.5mm,0.6mm,1mm,1.2mm,1.5mm,1.8mm,2mm,2.35mm,and 3mm),1pcs jewelry vice, 1 pcs flat file,1 pcs round file and 5 pcs silicone finger covers. Meet your hand carving and DIY needs.
- 【High Quality and Durable】-This manual pin vice has 3 jaw hardened steel keyless chucks to grip the small drill bits tightly. After many uses the drill bit does not skid and not falling off. And can adjust twist drills with a diameter of 0.2 - 3.4mm.The high-speed steel hobby drill can easily handle your precision drilling..
- 【 Bench Vise Help a Lot 】-There is a mini drill press vise, which deisgns with 4 plastic clips to clamp square, round, irregular objects of 0-30mm size. The jewelry vise can help you to fix the object you want to drill, and so that you can drill rightly.
- 【 Extra DIY Drill Auxiliary Tool】-Specialized diamond electroplating process with soft PVC-dipped handle makes these 2pcs files with high hardness, which can help you to polish and shape the wood, plastic, glass, resin, acrylic and other materials. And with 5pcs silicone finger covers in 3 sizes to protect your hands when opreating.
Check StockBUCKTOOL 12-INCH 6.2-A Professional Bench Drill Press Powerful 3/4HP Benchtop Drill Press Variable Speed Drill Press with IIIA Laser and Work Light
- POWERFUL 6.2A MOTOR: Equipped with a powerful 6.2A induction motor (most 12-IN drill press motors are only 5A), provide you constant power to drill through all kinds of material.
- PROFESSIONAL DRILL PRESS: 1/32" - 5/8" Keyed chuck, 12" swing, 3-1/8" spindle travel, and overall height of 39" (2" high than other 12" drill press).
- VARIABLE SPEED: You can easily adjust the speed from 580 to 3200 RPM, satisfying your drill needs from wood to all kinds of metal. Digital speed readout helps precisely control the speed.
- FULLY ADJUSTABLE WORK TABLE: The flat work table can rotate 360° and bevel 45° left or right.
- EXTRA SUPPORT: This drill press equips with a Class IIIA 2.5mW laser, work light, emergency stop switch, and no voltage release switch, help you work precisely and safely.
Check StockNEIKO 10235B 13/16” Drill Bit for Metal, 1/2” Shank, Silver and Deming, 135° Split Point, High Speed Steel Drilling Bit for Metals, Wood, Plastics, Composite Materials
- HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant..
- 135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster..
- 1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes..
- CHISELED PRECISION CUT: Each of the 13/16 inch drill bits have a precision manufactured cut for accurate drilling and the all-purpose reduced shank has a 1/2-inch chiseled diameter to fit any type of drill chuck with a precise and snug fit..
- DRILLING TYPES: This 13/16-inch silver and deming drill bit is ideal for drilling into steel, copper, aluminum, brass, wood, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, and composite materials..
Check Stockjxgzyy 15PCS Forstner Bit Set 10-50mm 2/5-2 Inch Round Shank Wood Drill Bit Set Woodworking Forstner Drilling Bits with Wooden Storage Case
- 【15-Piece Forstner Bit Set】: jxgzyy wood drilling forstner bits from 2/5 to 2 Inch include 10mm(2/5''), 12mm(1/2"), 15mm(19/32"), 16mm(5/8"), 18mm(45/64"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 26mm(1-1/16"), 28mm(1-1/8"), 30mm(1-3/16"), 35mm(1-3/8"), 40mm(1-3/5"), 45mm(1-3/4"), 50mm(2"). Come with a wooden storage case, easy to organize the bits and protect them when not in use..
- 【Durable Material】: Forstner bits set is made of high-quality steel, with the advantage of sharp edge, accurate positioning, high precision and stable cutting..
- 【Sharp Design】: Our drill has the features of sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting and high toughness. Fostner bit can produce holes that are smooth and flat, and create "chisel-like" curls for fast, clean chip removal..
- 【Efficient Cutting】: The tooth-shaped design of this steel forstner bit ensures less friction and heat, significantly reducing cutting time. Also these drill bits make drilling hole smooth and the center point of the forstner drills allows precise positioning without slipping, which makes drilling more easy..
- 【Wide Application】: Metric forstner bit sets apply to drill presses, pistol drills, bench drills, vertical drills, hand....
Check Stock