Reviews Flat Surface Grinding Machine

TECSPACE 110V Commercial Meat Grinder, 1100W 550Lbs/hour Electric Meat Grinder, 193r/min Heavy Duty Stainless Steel Industrial meat grinder with 4 Blades, Stuffing Tube, Home Kitchen Use (Silver)

  • ... will save your lots of time and effort..
  • Special & Detailed Design: The feed tray on the top provide large enough area to keep a lot of meat at hand. And the plastic tamper makes it convenient to remove skin, tendon, and bones from the meat, ramming the meat ready for grinding. We also offer 5 grinding plates (4mm, 6 mm, 8 mm, 10mm, 12mm) for coarse or fine grinding..
  • Safety & Easy to Use: You can easily operate this bone saw machine by ON/OFF switch. The feeder tube is 54 mm/2.1inch, so the meat doesn’t need to chop before grinding. The vent of the machine ensures good ventilation when it is running, which protects the motor from overheating and improve its service life. Thanks to its sturdy material and smooth surface, this makes it easy to clean and maintain with a rag..
  • Multiple Application: The machine is not only designed for grind different kinds of meat, but also can be used to grind fish and vegetables, which is widely used in home kitchen, restaurant, food processing factory, slaughterhouse, supermarket, etc, both for home and commercial use. Using this excellent meat grinder to make delicious food you ....
Check Stock

An Expat's Struggle: Making a Home in Panama

  • ...re about 80 x 120 mm/ 3.15 x 4.7 inches, appropriate size for tire repair, portable and lightweight, convenient to store and carry, able to solve the air leakage problem of your tires.
  • Direction for Use: just use a low speed grinder to polish the broken tire area, have the grinding area slightly larger than the tire repair patch, and keep the surface clean, then spread the vulcanizing machine from the center to the grinding edge and dry for 3-5 minutes, tear off the film on the patch, press the patch until it is completely glued, press the patch from the center to the sides with a press wheel until the air inside is expelled.
  • Applicable for Many Vehicles: the car tire patch kit is suitable for repairing tires of various vehicles, including trucks, cars, trailers and more, able to meet your various needs, so you can use them with ease and confidence.
Check Stock

PEGATEC 40 Grit Flap Discs 4 1/2 inch Flap Wheel Type 29 Flap Sanding Disc with 7/8 Arbor Aluminum Oxide Abrasives for Grinding, Blending, Sanding and Finishing - 10 Packs

  • High Grinding Efficiency - the surface of the sanding discs is equipped with a heat-resistant and anti-stick coating, and the high-strength aluminum oxide raw material which improve the grinding efficiency by 55% while ensuring the smooth surface of the material.
  • T29 15°Design, widely used - Our flap disc adopts T29 15° design, which is suitable for fine grinding of flat, curved, chamfered and concave-convex surfaces. The thick cloth base and high-tenacity cotton lining make the sanding discs more flexible, can be reached an excellent polishing effect.
  • Thickened Glass Fiber Mesh Cover - The glass fiber mesh cover design of our grinding wheels is combined BASF (resin adhesive),it is more wear-resistant than an ordinary plastic mesh cover so that the service life is increased by 2 times. The blade knob is made of PE which will not break even at 13500RPM.
  • Prevent Thermal Burns - In the grinding process, the temperature of general flap discs is too high, it is easy to burn the metal and make the metal discolor, which will reduce the hardness and toughness of the metal. The patented ratio of PEGATEC flap disc enhances heat dissipation and avoids thermal burns.
  • Multi-Purpose Sanding Discs - Angle grinder flap disc is designed to grind various materials,can b....
Check Stock

Acrylic Paint Set Non Toxic - 12ml (0.4 fl oz) 12 Colors Tubes Pigment Paints for Artist Hobby Painters Adults Kids, Ideal for Canvas Wood Clay Fabric Ceramic Crafts

  • The flat-bottomed glass muller is an indispensable tool for homemade natural mineral pigment oil paints, tempera paints and thangka paints. It is suitable for artists and painting enthusiasts who have strong individual requirements for pigment performance..
  • The grinding surface is frosted, suitable for use with tempered glass grinding plates or palettes. It is convenient to collect the ground paint or use it directly, and it is easier to clean up after work..
  • There are two muller in the grinding pestle set. You can use the large grinding pestle first, and then the small grinding pestle according to the grinding progress..
  • Before each use, put an appropriate amount of natural mineral pigment in the center of the grinding plate, dig a small hole in the middle of the pigment pile with a palette knife, and then add an appropriate amount of cold-pressed linseed oil or other media———— Be careful not to add too much at one time to avoid the paint is too thin. After initial mixing with a palette knife, use a grinding pestle to grind in a circle or "8" shape until you reach the personalized pigment you need..
  • Note: Glass products are fragile and should be stored properly to avoid children's contact. The grinding pestle is only used for studio grinding, do....
Check Stock

PVC Pipe Inside Cutter Plumbing Inside Cutter Internal Plastic Pipe Cutter with Grinding Wheel for Plastic Pipe Cutting Replacement (Classic Color)

  • Package includes: you will receive 1 piece of PVC pipe inside cutter and 1 piece of grinding wheel, which are helpful for replacement on your household and technical work and serve 2 different functions of cutting and grinding.
  • Lasting material: the plumbing inside cutter is made of carbon steel material with durability and hardness, and the smooth surface is resistant to rust and wear, providing a long service life and practical experience of working.
  • Practical design: the internal plastic pipe cutter is designed with the saw-toothed blade for fast cutting, and the grinding wheel helps to make the cut surface smooth and flat.
  • Collocating with the grinding wheel, the pipe cutting tool would effectively improve your working efficiency.
  • Convenient and portable: with the small size of 10.5 x 3 cm/ 4.1 x 1.2 inch and individual weight of 93 g, the plumbing internal cutter is compact and easy to carry, which is suitable for cutting plastic pipes from inside.
  • Easy to install: the plumbing tool cutters are available to attach to the power drill and move to cut the pipes.
  • It is appropriate to be handheld and simple to apply for household working and experienced people.
Check Stock

Commerical MP-2 Metallographic Grinder & Polisher Machine, Double Disk Table Type Polishing & Grinding Machine, Metallography Specimen Polishing Machine for The Polishing & Grinding of The Specimen

  • 【Specification】-Voltage: 110V / 60Hz.
  • 【Two-Disk Desktop】-The metallographic sample polishing machine is a dual-disc desktop polishing machine, which can be operated by two people at the same time, reducing working time and increasing work efficiency..
  • 【High Speed】-The speed of the polishing disc of this polishing machine is as high as 600rpm, and the speed of the grinding wheel is as high as 450rpm, which is very fast, which greatly improves your work efficiency..
  • 【Scope of Application】-This polishing machine is suitable for polishing and grinding specimens. The surface of the sample is very smooth after treatment, which can be used to observe and measure the metallographic structure of the sample under a microscope..
  • 【Shipment】-We ship directly from the US warehouse. Feel free to contact us if you have any questions.We will provide the best suitable solutions for you.We are committed to provide best service for every customer!.
Check Stock

Grinding And Polishing Head Grinding Wheel Dresser With Flat Diamond Coated Surface For Truing Grinding & Deburring Wheels Abrasive Dressing Tools

  • Very suitable for removing metal burrs after cutting, smoothing welds, grinding rivets and removing rust. It is also suitable for sharpening knives, scissors and lawn mower blades..
  • Sanding Head Size: 45*13*13mm/1.77*0.51*0.51”.
  • This diamond wheel dresser is a simple but practical tool of returning your grinding wheel to tip-top condition.
  • it restores and prolongs the life of grinding wheels..
  • Non-slip handle There is non-slip tread on the surface of the handle, which is designed for secure gripping..
  • Applications It is mainly used for all kinds of grinding machine’s grinding, polishing, sharping, perfect for white corundum wheel, brown corundum wheel, chromium corundum wheel and more..
Check Stock

AUTOTOOLHOME 20PCS Abrasive Flap Wheel Sander 80 Grit 1/8\ Shank Diameter 32mm 3/8\ Thick and 1\ Abrasive Sandpaper Flap Sanding Wheel Grinding Head Rotary Tool for Grinding and Polishing

  • Flap wheels sander used for grinding and polishing flat or contoured surfaces,Widely used for the stripping of old layers of paint ,during resurfacing project, sanding, finishing contoured wood surfaces, clean up welds and cuts in iron, stainless steel and metal alloys..
  • Effective as finishing sander after heavy -surface sanding and material removal is complete.
  • High performance aluminum oxide coated provides a solid and durability grinding power combined with high efficiency.Premium abraisves cloth provides long wheel life..
  • 80 grit for medium finish sanding ,Material: Emery Cloth(sandpaper),Metal shaft,20Pack flap wheel sander including 3/8”Thickness(Diameter:1.26"/32mm) and 1”Thickness(diamater:0.79"/20mm),each size 10pcs,1/8" mandrel for most brand rotary tool and electric grinder,Also fit for electric drills, cordless drills..
  • Sanding flap wheel is suitable for smoothing, rust removal, cleaning, deburring, surface grinding, decorative grinding, faceting and so on. Wheel can remove paint and sand, grind, level, and strip surfaces and makes quick work of it.These wheels style disks make use easy..
Check Stock

TUNTROL 304 Stainless Steel Manual Meat Grinder, #12 Hand Cranked Sausage Filler Filling Machine for Pork Beef Fish Chicken Pepper etc. (NO.12)

  • 【Stable Quality】The whole machine is made of stainless steel, no rust, no cracking! Thicker 304 stainless steel body, polished surface, more firm and beautiful! The 420 food grade stainless steel reinforced blade is durable and has a smooth surface, which can be used for many years..
  • 【Multifunctional use】Equipped with a sausage stuffing tube. Able to complete meat grinding and sausage stuffing by one machine. Can be used as sausage machine and meat mincer at the same time..
  • 【Selectable Cutting】Including 8mm and 4.5mm orifice plate, which can meet different processing needs and personal preferences..
  • 【Extended use】Widely used to grinding various of meat, vegetables and nuts, including pork, beef, lamb, fish, chicken (with bone), spices, pepper, mushrooms, long beans, radishes, etc..
  • 【Tips】Pay attention to cleaning the item before using..
Check Stock