Reviews Flaring Tool An Fittings

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

Anderson Metals - 50065-08 50065 Brass Compression Tube Fitting 90 Degree Elbow 1/2 x 1/2 Tube OD

  • Three piece construction - nut, sleeve and body..
  • USE WITH COPPER TUBING, BRASS TUBING, ALUMINUM TUBING AND PLASTIC TUBING ONLY. Not for use on pipe..
  • Easy to disassemble no flaring tool required - See chart for Assembly instructions..
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals - 50069-0606 50069 Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 3/8 NPT Male Pipe

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Anderson Metals Brass Compression Tube Fitting 90 Degree Elbow 3/8 Tube OD x 1/2 NPT Male Pipe 50069-0608 Copper

  • Three piece construction - nut, sleeve and body with attached insert.
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 1/4 Tube OD Male Compression x 1/4 NPT Female Pipe Size

  • Three piece construction - nut, sleeve and body..
  • Use with copper, brass, aluminum, or plastic tubing.
  • Easy to disassemble no flaring tool required.
  • Primary uses water, gasoline, oil and vacuum lines.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock