Reviews Fireplace Cement

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
• 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....

VAOVI Peel and Stick Tile Kitchen Backsplash Tiles Peel and Stick,Bathroom Backsplash Peel and Stick Linear Mosaic Tile Waterproof(5Tiles,Gray)

• Stick on Tiles for Backsplash Kitchen:Marble-look matte mixed with aluminum chips,10"W x12.1"Lx3.2mm thick individual mosaic covers 3.44sqft/5sheet,6.78sqft/10sheets.
• Adhesive Wall Tiles Peel and Stick:Ideal for use with accent walls, bathroom walls, fireplace exteriors, kitchen backsplashes, kitchen counters,and shower walls.
• Premium Peel and Stick Tile:Waterproof,heat resistant tiles,interlocking tile blocks provide a seamless look.
• Easy DIY 3D Tiles:Wipe clean with a damp cloth,easy to cut with scissors or box cutter..
• Strong Adhension Linear Tile Backsplash:Can stick over existing tiles or smooth backsplash,such as ceramic tiles,metal,wood,glass,cement wall,painted wall,etc..

VAOVI Peel and Stick Tile Kitchen Backsplash Tiles Peel and Stick,Bathroom Backsplash Peel and Stick Linear Mosaic Tile Waterproof(10Tiles,Gray)

• Stick on Tiles for Backsplash Kitchen:Marble-look matte mixed with aluminum chips,10"W x12.1"Lx3.2mm thick individual mosaic covers 3.44sqft/5sheet,6.78sqft/10sheets.
• Adhesive Wall Tiles Peel and Stick:Ideal for use with accent walls, bathroom walls, fireplace exteriors, kitchen backsplashes, kitchen counters,and shower walls.
• Premium Peel and Stick Tile:Waterproof,heat resistant tiles,interlocking tile blocks provide a seamless look.
• Easy DIY 3D Tiles:Wipe clean with a damp cloth,easy to cut with scissors or box cutter..
• Strong Adhension Linear Tile Backsplash:Can stick over existing tiles or smooth backsplash,such as ceramic tiles,metal,wood,glass,cement wall,painted wall,etc..

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).

Simond Store Ceramic Fiber Insulation Roll, 6# Density 2600F, 1' X 24' X 12.5' Fireproof Insulating Blanket for Pizza Oven Forges Foundry Furnace Wall and Dishwasher Insulation

• Fireproof Insulation: Ceramic fiber blanket, rated to temperature of 2600F, 1 inch X 24 inches X 150 inches, density 6lbs..
• Chemical composition: Alumina (32%-34%), Silica (49%-52%), Zircon (14%-18%)..
• For Whom: Perfect for Blacksmiths, Pottery Workers, and Refiners..
• Uses: Insulation for Forge, Furnace, Kiln, Knife Making, Pizza Ovens, Outside Ovens, , Wood Stove, Home Foundry, Heat Treatment & Glass furnaces and in process of Glass blowing, Turbine, Brazing, Welding, Soldering, Muffler packing, Fireplace Insulation, Boiler, Foundries, Refractory Wool, Glass Blowing, Jewellery Making, Fireproof Doors..
• Easy Installation: Easy to install with mechanical fastening or high temperature adhesive such as sodium silicate, refractory cement or RTV silicone..

5 X 6 FIBER CEMENT BLADE CARDED

G JOY Sample Kit of Brown Thin Brick Veneers – 3 Single Faux Bricks in Box – Interior Brick Tile for Backsplash, Fireplace, Accent Walls – Low Cost, Easy DIY Bricks Installation

• ✅ Our Thin Brick Veneers can be used for interior walls, fireplace surrounds, over drywall, concrete, and wood. Faux Brick fantastic solutions to unsightly, stubborn bothersome walls, ceiling, or any surface that requires covering, such as living room, bedroom, kitchen area space feature walls and ceiling in home design.
• company logo wall, conference room, lobby backdrop, reception desk front function space in the workplace, dining establishment, cafes, cinema, and club design..
• ✅ G JOY Thin Brick Tile - lighter, thinner, and only 20% the weight of traditional brick veneer. Large variety of sizes, colors and shapes. Can be painted. Environmentally friendly, and cost effective. High fire resistance. Cuts easily with an hand saw. Simply apply adhesive to virtually any surface and press the single thin bricks sheets into place..
• ✅ Each Thin Brick - designed and handcrafted in the USA. The texture and color is an excellent look for any interior project. They are perfect for unique designs and custom spaces. Besides producing a sensational visual impact for the wall, our bricks veneers can likewise be crafted into furnishings designs, such as cabinet doors, bed headboards, bedroom wardrobe, and kitchen area cabinet Adds comfort, style and value to you....

STVKE Reusable Protective Mat for Floor, Grill and Campfires, Heat Resistant and Non-Stick (Color : 50x50cm)

• 1. Protection against burns: The fire mat is resistant to fire and protects the surface of your deck from burns, cement stains and grease spills. It can be used on any surface, from wood to grass..
• 2. Fire Safety: The fire pit pad is made of fire retardant and heat-insulating material, making it safe to use anywhere. It is waterproof and don't worry if the fire accidentally falls and causes a fire..
• 3. Night visibility: The fire mat has 4 reflective strips that make it visible in the dark. Plus, it's safe for adults, kids, and pets..
• 4. Durability and Reusability: The fire pit pad is resistant to abrasion, tearing, oil and water. It is easy to clean with a cloth or vacuum cleaner and can be reused several times..
• 5. Easy storage: The cover protector is easy to store in a storage bag and can be used in the kitchen, fireplace, camping, office, grill, etc..

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
• Make sure to mix the paint and cement dry powder first, then add water and stir!.