Reviews Fimco Spreader Hitch Mount

CURT 45372 Forged Trailer Hitch Mount with 2-5/16-Inch Ball & Pin, Fits 2-1/2-Inch Receiver, 20,000 lbs, 4-in Drop , Black

  • DEPENDABLE STRENGTH. Rated to tow 20,000 pounds gross trailer weight and 2,000 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch receiver. The ball mount has a 4-inch drop, 2-5/16-inch diameter ball and 5/8-inch pin hole.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
Check Stock

CURT 45155 Fusion Trailer Hitch Mount with 2-Inch Ball & Pin Fits 2-In Receiver 7,500 lbs 2 Rise black

  • DEPENDABLE STRENGTH. Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 2-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45152 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Rise

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch rise to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45131 Fusion Trailer Hitch Mount with 1-7/8-Inch Ball & Pin, Fits 2-Inch Receiver, 5,000 lbs, 2-In Drop

  • DEPENDABLE STRENGTH. Rated to tow 5,000 pounds gross trailer weight and 500 pounds tongue weight, this welded, one-piece ball hitch offers dependability for your towing (limited to lowest-rated towing component).
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 2-inch drop to promote level towing with your own particular vehicle-trailer setup.
  • SECURE TOWING. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a welded 1-7/8-inch diameter tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and welded trailer ball make installation easy.
Check Stock

CURT 45148 Trailer Hitch Mount, 2-Inch Ball, Pin, Fits 1-1/4-In Receiver, 3,500 lbs, 3-1/4\ Drop, GLOSS BLACK POWDER COAT

  • DEPENDABLE STRENGTH. Rated to tow 3,500 pounds gross trailer weight and 350 pounds tongue weight, this ball hitch offers dependability for your towing setup (weight capacity may change if trailer ball is removed).
  • VERSATILE USE. This trailer hitch ball mount comes with a 1-1/4-inch shank to fit virtually any industry-standard 1-1/4-inch receiver. The ball mount has a 3-1/4-inch drop, 2-inch diameter ball, 1/2-inch hitch pin hole and 7-1/4-inch overall length.
  • READY TO TOW. Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. These finishes resist damage from rain, dirt, road salt and other corrosive threats.
  • EASY TO INSTALL. To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 1-1/4-inch hitch receiver. The rounded shank makes installation easy.
Check Stock

Goreks Tri Ball Hitch Mount Receiver 1-7/8” – 2” & 2-5/16” Welded Chrome Plated Balls with Hollow Black Powder Coated Drop Hitch | Multi Use

  • This multi-ball hitch mount design enables fast and easy switching between ball sizes without the need to install or own an entirely different ball mount. In addition, no need of removing a hitch ball and reloading a new one is needed. The trailer hitch ball mount features three welded trailer balls accommodating a wide variety of trailers, perfect for owners with multiple trailers..
  • VERSATILE CAPACITY: The triple ball mount has a range of towing capacities to Choose from including 2000/200 lbs. 6000/600 lbs. and 10000/1000 lbs. depending on your needs simply rotate to the desired hitch ball. The hitch easily connects your trailer to your vehicle for hassle free hauling and easy operation..
  • SPECS: The hitch mount includes three different size chrome plated balls which will cover all your needs it fits for 1 7/8-inch, 2 inches, and 2 5/16-inch hitch couplers. Its Finished black powder coating provides durable enhanced rust and corrosion resistance. In addition, it features heavy-duty chrome plated robotically welded hitch balls for superior strength providing excellent mounting facility..
  • SECURE TOWING: With a capacity range of 2000lbs. on the 1-7/8-inch ball, 6000lbs. on the 2-inch ball, and 10000lbs on 2-5/16-inch ball the Goreks Tri ball mount is the ....
Check Stock

Shocker Impact Cushion Hitch Combo Ball & Sway Control Towing Kit, Fits 2\ Hitch 2 Sway Arms

  • Dual cusihion hitch Sway control combo multi-ball mount with 2 sway control tabs for mounting the basic sway control arm bar(s) & mini balls. Order with 1 Sway Arm Kit for use with Trailer up to 10K lbs. Order with 2 Sway Arm Kits for use with Trailers over 10K lbs..
  • 7" of Adjustment - 4" of rise to 4" of drop. 7 adjustment holes that can be flipped around more drop or rise. 2" & 2-5/16" hitch balls.
  • Premium powder coated finish of base frame & ball mount. Multi-ball 1-piece construction for max strength & durability. 2 hitch pin holes to adjust the length and there is plenty of room on the receiver shank to accommodate hitch mounted towing mud flaps or shocker bumper tow flaps.
  • 12,000 lbs towing capacity and a 1,200 lbs tongue weight. Works great on pickup trucks, vans, suvs, cuvs and minivans for pulling campers & other trailers. Works with all Shocker hitch ball mount attachments drop, pintle, raised, drawbar, clevis (sold separately).
  • Includes complete adjustable Shocker impact cushion hitch base frame assembly, combo dual ball mount with 2" & 2-5/16" hitch balls & 2 sway bar tabs, 2 ball mount pins & 1 or 2 friction sway control arm kits. Made by Shocker Hitch USA.
Check Stock

Titan Attachments 12 Volt ATV/UTV Broadcast Spreader, 80 LB Capacity, with Rain Cover

  • LOAD CAPACITY: The 80pound Broadcast Spreader by Titan Attachments mounts to the front or rear utility rack of your ATV/UTV. The 12V spreader free flows materials such as seeds, fertilizer, and sand up to 12feet..
  • QUICK CONNECT MOUNT: The spreader mounts easy with the quickconnect horizontal mount system, which includes a wiring harness, and includes a broadcast adjustment lever with a gauge that mounts to the left or right side of the spreader..
  • DURABLE CONSTRUCTION: This spreader is constructed heavyduty with 80pound load capacity and a 12foot broadcast width. The 12volt motor is vinyl coated, adding durability and a longerlasting quality..
  • DIMENSIONS: At 11pounds, the 80Pound ATV Broadcast Spreader measures at 13.3inches high, 26inches long, and 20.9inches wide, and features a rain cover to protect the materials from the elements..
Check Stock

CURT 31010 Trailer Hitch Winch Mount for 2-Inch Receiver

  • SECURE MOUNT. This hitch-mounted winch plate allows you to attach a winch to your vehicle, using your trailer hitch. The slotted holes accept most winches, and it can be installed as needed.
  • STANDARD FIT. This receiver hitch winch mount is equipped with a standard 2-inch shank to fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin sold separately).
  • FRONT OR REAR. This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.
  • SOLID STRENGTH. This hitch-mounted winch bracket is constructed from steel to provide dependable strength for tough jobs.
  • CORROSION-RESISTANT. For long-lasting protection against the elements, this hitch-mounted winch mount is shielded in a durable black powder coat finish.
Check Stock