Reviews Fiber Optical Receiver

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

StarTech.com HDMI Over Fiber Extender (LC) - 4K 60Hz HDMI 2.0-3300ft (1km) Over Single Mode - 1000ft (300m) Over Multimode Fiber Optic Cable - Transmitter/Receiver AV Converter Kit (ST121HD20FXA)

  • HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
  • RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
  • 3x Status LEDs for power/optical link/HDMI link.
  • SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
  • IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
  • RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
  • EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
  • No IP configuration/drivers/network equipment required.
  • Durable steel housing w/ built-in mounting hardware for a tidy installation.
Check Stock

Mini 3G-SDI Video Extender with SDI Loop Output 1080P 3G-SDI Fiber Converter Extension of Distances Up to 20km Over Single-Mode Optical Transceiver with Tally or Reverse RS485

  • 3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
  • HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
  • Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
  • Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
  • Handle all Pathological patterns, fully digital non-compression broadcast level transmission.
Check Stock

Conwork 1x2 Toslink Fiber Optic Digital Optical Audio Splitter Adapter - 1 Input 2 Output

  • Connect one toslink optical digital audio source and split into two different receiving devices.
  • Ideal for connecting your CD player, DVD player, or other digital audio source to both of your receiver and recorder.
  • Compatible with Male Toslink cables. 24k Gold Connectors, 1mm low-loss core, low-jitter synthetic fiber and heavy metal connectors to dampen....
  • The splitter adapter is perfect for professional or home installations as it saves on the wear of constant plugging and unplugging of cables..
  • Limited lifetime Warranty and Product Support..
Check Stock

Stellar Labs 3x1 Toslink Switch Digital Optical Audio Switch Splitter with IR Remote Control, 3 Port Hub Box Selector Combiner, SPDIF Switcher 3 in 1 Out

  • 3 IN 1 OUT AUDIO SWITCH – The Optical Audio Switch allows the user to connect three (3) digital optical Toslink sources to one (1) Toslink optical output..
  • AUDIO FORMAT SUPPORT – This 3×1 Toslink Switch supports all digital SPDIF audio formats including Dolby digital & DTS 5. 1, Dolby digital Plus.
  • support PCM stereo 32kHz, 44. 1kHz, 48kHz and 96kHz.
  • REMOTE CONTROL & MANUAL SWITCHING – Plug & Play, Input can be Selected via IR Remote Control or Button on the Switch. Supports PS3, PS4, Blu-ray Player, Cable box, HDTV, Sound bar, AV Receiver or Amplifier..
  • OVERLOAD PROTECTION – Digital Optical Audio Switcher features Over-voltage protection can prevent the damage caused by connecting an unmatched power adapter to the machine..
  • LONG DISTANCE SIGNAL TRANSMISSION – Transmission output distance is up to 40m/130ft via optical Toslink fiber cable that losses less than 0.2dB/m, sampling frequency up to 96 KHz..
Check Stock

Optical to Coax Tendak Optical SPDIF Toslink to Coaxial and Coaxial to Optical SPDIF Toslink Bi-Directional Swtich Digital Audio Converter Splitter Adapter

  • OPTICAL TO COAXIAL BI-DIRECTIONAL AUDIO CONVERTER - Switch to select either OPTICAL TOSLINK or COAX input and convert the signal (as is) to both its....
  • AUDIO FORMAT - Audio Input & Output Support audio format: LPCM2.0/ DTS/ DOLBY-AC3. And the highest support 192 KHZ sampling rate. Noise-free....
  • EASY TO SETUP - Plug and Play, no need any software and drive. It's able to power this Optical to Coax Converter from Phone Adapter and a USB jack on....
  • LONG DISTANCE - Use optical fiber cable loss less the 0.2Db/m, Output distance is up to 30 Meters(98 Feet), Use the standard coaxial cable output can....
  • WIDE APPLICABILITY - Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device....
Check Stock

PROZOR DAC Converter Coaxial to Optical and Optical to Coaxial Switch Bi-Directional Digital Audio Converter Optical SPDIF Toslink Splitter Adapter 1 in 2 Out

  • 【Digital Audio Converter】DAC Converter Supports LPCM2.0/ DTS/ Dolby AC3/ 5.1CH: Multiple Digital Audio Formats To Achieve Lossless Digital Audio Conversion Makes Our Converter To Be An Ideal Tool For Your Fantastic Home Theater..
  • 【High Sampling Rate】Supports up to 192 KHz, Noise-Free Transmission And The Highest Support 192 KHz 24bit Sampling Rate For Excellent Audio Output, As Well As 32KHz, 44.1KHz, 48KHz, 96KHz..
  • 【Great Compatibility】1m Optical Cable And 1m Coaxial Cable Provided For Long-Distance Transmission Is Perfectly Compatible With Satellite Receiver, BR player, Blu-ray Player, UHD TV, DVD, Sound Bar, Amplifier And Other Devices With Optical And Coaxial Interfaces..
  • 【Metal Case】This Product Is A Metal Box Structure, Solid, No Signal Interference..
  • 【Plug And Play】Simple to Install And Easy to Operate. No Installation Problem With Extra Drive. Optical Splitter 1 in 2 Out, One Way Of Optical Fiber Signals Splitter To Two Sets Of Spdif/Slink/Optical Signal Receiving Device..
Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

  • ...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....
Check Stock

Fibergaga-1m(3ft) OS2 SC/APC to SC/APC Fiber Patch Cable Single Mode Fiber, Simplex, Length Option: 0.5M(1.6ft)-75M(246ft) 9/125μm Fiber Optic Cable

  • fiber information: 1m(3ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
  • The model of this fiber is a 1m- 3ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
  • This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
  • Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connector, with low signal loss, can be used more safely..
  • We have focused on optical fiber jumpers for 15 years. Each cable is ....
Check Stock