SATA Power Cable 3 Pack SATA 15-Pin to 6-Pin PCI Express Card Power Cable Adapter 8 Inch

  • Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
  • Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
  • Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
  • Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
  • Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.
Check Stock

Comet Original GP-1 146/446 MHz Dual Band Heavy-Duty Fiberglass Vertical Base Antenna - 4' 2', SO-239 Connector

  • Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
  • Antenna Interface Connector: UHF PL259 Male 50 Ohm Connector.
  • Antenna Mounting Connector: UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector.
  • Cable Connector: UHF PL259 Male 50 Ohm Connector.
  • Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker.
  • Package List: 1 x Antenna, 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).
Check Stock

Mugteeve Dual XLR to 1/8 Stereo AUX Cable, 10FT Double XLR Male y Splitter Cord to 3.5mm TRS Mini Headphone Jack, OFC Shield no Hum no Buzz, for Studio Monitor Speakers, Laptop, DMX Adapter

  • ...This cable is designed to carry audio signal from 1/8 jack device like mobilephone, computer, tablet and MP3, to XLR input device include mixer, DJ console, studio monitor, speaker, etc. Due to this cable can separate left and right channel signal, it is often used in audio recording and editing. The 1/8 mini TRS connector can work in both 3.5mm TRS or 3.5mm TRRS jack, please don't worry..
  • 【Specification】This 1/8 to dual XLR splitter cable is 10FT/3meters long. It's nylon braided, strong and heavy duty. 3.5mm connector is gold plated, gold plated design can reduce signal distortion. 2 XLR end has blue and red ring, they will help you to distinguish left and right channel signal. The cable will give a soft feeling..
  • 【OFC shield, noise free】This mini TRS to double XLR breakout cable is full covered with spiral OFC(Oxygen Free Copper). OFC layer can effectively keep out RFI and EMI. Under the OFC layer, there is also a aluminum foil layer. With OFC and aluminum foil layer, this cable will carry your signal without having to worry about interference. Anyway, we do not suggest to put the cable over AC power plugs, power adapters, chargers and others that ouput RFI and EMI..
  • 【Important Notice】VERY VERY import, please kindly note that though t....
Check Stock

Cable Matters Active USB C Cable 24.6 ft for Oculus Quest 2 Headset and Hard Drives (Compatible with Oculus Link Cable Feature) in 7.5 Meters / 24.6 Feet - Not Compatible with Monitors or Docks

  • ...s compatible with the Oculus Quest and Oculus Quest 2 headset’s Oculus Link cable feature, and is designed for VR in mind.
  • USB-C cable is compatible with the Oculus Quest link cable port / Oculus Quest 2 link cable port.
  • Play PC VR games on the portable Oculus Quest 2 headset.
  • Uni-directional active USB cable host connector connects to laptops and desktop PCs, and the 90-degree USB-C connector connects to VR headsets and other USB-C devices.
  • Extend the limits of PCVR with a 7.5-meter (24.6-foot) cable.
  • Long VR cable makes large VR play spaces possible.
  • Game away from a PC, monitor, and other obstacles with the long USB-C cable.
  • USB-C VR cable connector and USB-C PC connector supports connecting to PCs with USB-C ports.
  • The USB-C cable is purpose-built for VR, and features a durable 90-degree connector at the VR headset end for an unintrusive and reliable connection.
  • Active chipset of the USB C cable boosts the signal to ensure flawless video, audio, and tracking support for intense VR sessions.
  • Cable has been thoroughly tested for compatibility with the Oculus Quest link feature.
  • USB-C cable supports a data transfer rate of up to 5Gbps, making the cable useful as a standard USB-C cable for other devices like smartphones and tablets. Does not support US....
Check Stock

BNC to HDMI Converter Adapter Female CVBS BNC HDMI Coax Connector Coaxial Composite Analog Video Audio Input 1080P Output HDCP Hook Security Camera DVRs Surveillance CVR AC1420 CCTV for Monitor HD TV

  • BNC to HDMI Converter - This BNC HDMI connector is an adpater to Hook up old devices with new modern PC monitor or LCD through conversion of BNC Coax analog video & 3.5mm aux audio Composites signal input to HDMI output for CVBS security cameras VCR , surveillance DVRs , multiplexers CVR AC1420 or CCTV system to HDTV , projector , HD monitor , high-definition large / flat screen LED digital LCD TVs etc..
  • BNC to HDMI - Equipped 3.5mm audio port to input audible signals that you can inject sounds to the CVBS cameras video signals. It's a simplistic way to broadcast live video feed and perfect for real-time video monitor using CVBS protocol.(Note: It's ONLY works with CVBS signal camera, NOT for AHD / TVI / CVI / SDI camera or antenna / cable TV.
  • The output port is standard HDMI type A and the input is coax BNC , NOT coax RF, If you need RF, please check the hdmi to RF converter in our store.).
  • CCTV to HDMI Converter - Wire it by the steps of CVBS CCTV camera or DVR with BNC Coax output - coaxial cable - this adapter - HDMI cable - Projector/ Computer / pc / monitor ( if you use a TV set as the monitor, switch the“input or source” button on the TV clicker to the HMID mode.).
  • BNC to HDMI Adapter for TV - Adapts 3D compensation technology: motion optimi....
Check Stock

3 Lead Cable Snap 6 Pins Connector

  • Compatibility: AAMI All and others(please see the picture of the details).
  • Distal Connector: Angle Connector Proximal Connector: Snap.
  • Lead Number: 3. Total Cable Length: 11 ft. Lead Cable Material: TPU Jacket..
  • Easy to clean and repair. Brand new and high quality product. Accurate measurement and fast responses..
  • Packaging Included: 1 x 3 Lead Cable Snap Connector for AAMI.
Check Stock

Tecreddy CB Radio Antenna Soft Whip BNC & PL259 Male CB Antenna with Magnetic Base Compatible with Cobra Midland Uniden Maxon President Portable Handheld CB Radio Car Mobile Radio Scanner

  • Compatible with all handheld CB radios with a BNC or UHF connector, improve quality and range to CB radio reception. Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C..
  • This soft whip antenna can be removed and installed directly on the CB radio for use. The antenna design is soft, flexible and durable. It can also be used on a magnetic base. Both usages are very convenient..
  • Antenna&Cable Connector Type: BNC Male Connector.
  • Cable Connector Type: BNC Male Connector.
  • Accessories: UHF PL-259 Male to BNC Female Connector.
  • Package Includes: 1 x Antenna, 1 x Magnetic Base, 1 x Connector.
Check Stock

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

  • Total cable length: approx. 210 mm/ 8.3 inch.
  • 2 Pin JST connector, one side for plug the other side for welding.
  • Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
  • This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.
Check Stock

2X LCD Connection Connector Ribbon Flex Cable Module Replacement Compatible with Samsung Galaxy Tab A7 10.4 2020 T500

  • LCD Connection Connector Ribbon Flex Cable Module Replacement Compatible with Samsung Galaxy Tab A7 10.4 2020 T500.
  • Tips: This is LCD Connection Connector Ribbon Flex Cable Module replacement to replace your old damage LCD Connection Connector Ribbon Flex Cable Module, don't include instructions, please install it by a professional technician..
  • Broken your LCD Connection Connector Ribbon Flex Cable Module, don't need to change new machine, just buy this item and replce your damage LCD Connection Connector Ribbon Flex Cable Module, let your Device work again again..
  • Compatible with: Samsung Galaxy Tab A7 10.4 2020 T500 (Please check your machine model before your purchase).
  • Product is fragile, easy to be damage during shipping. So if there are any questions, please contact us first, we will try our best to help you..
Check Stock