Reviews Faux Wood Filament

BOMEI PACK Fiber Reinforced Packing Tape, Clear Bi Directional Filament Strapping Tape 3Inch x 55yds 6.7Mil, Total 110yds

  • ✔5.3 mil thickness clear filament duct tape, thick enough, better adhesion, strong bonding. It is perfect for heaviest, toughest tasks that need industrial grade adhesion, strong holding power. Cut by scissors..
  • ✔Transparent filament strapping tape with smooth surface is perfect for packing, strapping, fixing, reinforcing, repairing and palletizing..
  • ✔With Special formulated, straight filament packing tape adhere to variety of surfaces: glass, wood, plastic, metal, fiberboard, nylon, cardboard etc....
  • ✔Filament reinforced packing tape with weatherproof, moist resistant, UV and temperature resistant, suitable for most repairs, green house and outdoor use..
  • ✔Filament fiber reinforced tape is ideal for furniture maintenance, heavy duty packing, carton sealing, carpet fixing, toy& vehicle patching, repairing and protecting..
Check Stock

Gorham Iron Gray Pendant Chandelier 16\ Wide Farmhouse Industrial Clear Glass Shades 4-Light Fixture for Dining Room House Foyer Entryway Bedroom Kitchen Island Hallway Ceilings - Franklin Iron Works

  • 32" high x 16" wide. Canopy is 5 1/2" wide. Weighs 20.9 lbs..
  • Includes 6-feet of chain and 11-feet of wire. Sloped ceiling adaptable..
  • Uses four maximum 60 watt candelabra base bulbs (not included). Shown with clear glass Edison filament bulbs..
  • Rustic-industrial four-light pendant light. From the Gorham collection by the Franklin Iron Works brand..
  • Clear seeded glass cylinder allows the bulbs to be seen. Iron gray finish metal frame. Faux wood finish detailing..
Check Stock

OSAIRUOS W47'' Vintage Rustic Rod Iron Chandelier Farmhouse Wagon Wheel Chandeliers Lighting Fixture Industrial Large Round Light for Living Room Hotel Church Cafe Shops, Nickel

  • 29 1/4" wide x 23 1/2" high. Round canopy is 5 1/4" wide x 1 1/4" high. Arms are each 22" long. Weighs 11.7 lbs..
  • Comes with 6 1/4-feet of chain and 12 1/4-feet of clear wire. Sloped ceiling adaptable (0-90 degrees)..
  • Uses eight maximum 60 watt candelabra base B10 bulbs (not included). Shown with Edison filament bulbs..
  • Eight-light wagon wheel ring chandelier. From the Possini Euro Design brand. Ideal for modern farmhouse or contemporary rooms..
  • Gray faux wood ring. Brushed nickel finish frame and canopy. Metal construction. Open design allows the bulbs to be seen..
Check Stock

AMOLEN Dark Wood Walnut PLA Filament 1.75mm,Walnut 3D Printer Filament with 30% Real Wood Fiber,Wood Filament,1KG

  • HIGH COMPATIBILITY: AMOLEN PLA Filament is compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear..
  • PREMIER MATERIAL: Made from PLA and wood particles. Prints just like normal PLA with gorgeous surface of wood color and texture. Extrusion temperature range: 190 - 220°C..
  • DIMENSIONAL ACCURACY: Diameter variance of no more than 30 microns for consistent feeding and better 3D prints..
  • SMOOTHLY PRINT: AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • HIGH PERFORMANCE: Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best..
Check Stock

eSUN PLA-LW PLA 3D Printer Filament 1.75mm 1KG Spool Lightweight Strong Paint Adhesion Foaming PLA Filament for 3D Printers 3D Printed Airplane Natural

  • 【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest....
  • 【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and....
  • 【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is....
  • 【Good Interlayer Adhesion & Matte Printing Effect】 Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the....
  • 【Foaming When Printing】At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the....
Check Stock

Snapmaker Glow in The Dark PLA Filament 1.75mm, 3D Printer Filament 1kg Spool (2.2 lbs) Dimensional Accuracy +/- 0.03 mm 1 Pack

  • Glow in The Dark PLA Filament: This Snapmaker filament contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but please attention that too long exposure time may damage the glow filament..
  • High Dimensional Accuracy: Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee Snapmaker Glow in The Dark PLA filament to be strict tolerances, diameter 1.75mm, dimensional Accuracy 99% Probability +/- 0.03 mm.
  • Clog-Free, Bubble-Free, and Easy to use: Designed and Manufactured with Clog-Free patent to guarantee a smoother and more stable printing experience with Snapmaker glow filament. Vacuum sealed with desiccants in a transparent bag, no bubble, and easy to print. Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking..
  • Wide Compatibility: Snapmaker glow in the dark PLA filament is ideal for use with practically all FDM 3D Printers, such as Ender, Prusa, Makerbot, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75mm Wood glow filament..
Check Stock

SUNLU Silk Rainbow Filament, Shiny Multicolor Gradient PLA+ Filament 1.75mm, 1kg(2.2lbs)/Spool 3D Filament for 3D Printer & 3D Pen, Shiny Silk Rinbow Ⅰ

  • 【SUNLU Silk Rainbow 3D Filament 1.75mm】 Every color changes every 15-18 meters. The change from one color to another is random. Gradually multicolors make your print works more eye-catching and unique..
  • 【Shiny Multicolor Silk PLA+ filament 】Silk PLA+ printer filament is shiner than standard PLA. No need extra polishing, printing at a high gloss guarantee a more beautiful finish , it has a similar sheen as metal..
  • 【Easy To Use】 SUNLU 3D printer filament keeps improving the printing performance, Silk rainbow Ⅰ is easier to print smoothly, adhere to the printing platform, and it has less warping, less stringing..
  • 【No Ordor & No Clog & No Bubble】Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience.
  • Complete drying for 24 hours before vacuum aluminum foil packaging to effectively protect the Silk 3D filament from moisture..
  • 【All Lifetime Warranty | Rainbow PLA, PLA+, ABS, PETG, TPU, Wood, Carbon Fiber】Fast and effective 24 x 7 professional customer support providing technical solution. If SUNLU 3D Printer filament 1.75mm have any problem, please send email to us..
Check Stock

Franklin Iron Works Eldrige Bronze Wood Finish Pot Rack Linear Pendant Chandelier Lighting 36 1/2" Wide Rustic Farmhouse Clear Seed Glass 4-Light Fixture Kitchen Island Dining Room House

  • 36 1/2" wide x 19" deep x 20 3/4" high. Canopy is 13 3/4" wide x 4 3/4" deep x 2 1/4" high. Weighs 25.3 lbs..
  • Includes 12-feet of chain and wire. Sloped ceiling adaptable..
  • Uses four maximum 60 watt standard-medium base bulbs (not included). Shown with clear glass Edison filament bulbs..
  • Pot rack chandelier by Frankling Iron works. Comes with 10 hooks for hanging pots and pans (50 lbs. limit). A charming look for industrial, cottage, or farmhouse homes..
  • Clear seeded glass cylinders. Bronze and faux wood finish. Metal construction..
Check Stock

KSANA Farmhouse Faux Wood Flush Mount Ceiling Light Fixture with Water Ripple Glass for Bedroom, Hallway, Kitchen, Dining & Living Room, Foyer and Bathroom

  • ...de 4ft shatter-resistant of package and 72hrs lighting inspection, allowing you've selected a piece with personality as well as durability that will withstand the test of time.
  • [Warm Notice] This ceiling light requires 3 x E12 Type B base max 40W bulbs (Not Included) and should be used in 120V. It works with vintage filament, incandescent, LED, CFL bulbs and compatible dimmer switch (Not Included). 2 year warranty and 24-hour quickly customer support. Any concerns please feel free to contact us.
Check Stock