20 inch 40 Lbs Gas Struts Prop Shock C16-08316 C1608316 for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs (Suitable Weight: 30-45 Pounds)
- 20 inch 40 Pounds gas struts - Extended Length (Center-to-Center): 19.7 in (500mm), Compressed Length: 11.8 in. Force: 40 Pounds Per Strut. End Fiting: 10mm Ball Stud Sockets..
- 2 struts each package- Suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS. Note: DO NOT Compress them by Hands Before Installing, the Struts could Only be Compressed After Installing Successfully!!!.
- 20 inch Truck cap lid lift supports - Replaces the following OEM Numbers:C1608316, C16-08316, C1621705, C16-21705, C1622180, C16-22180, SG327005..
- 20" 40 lb gas shocks - Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
- NOTE: If the lid weight is less than 32lbs or more than 45 pounds, please choose other pressure struts!.
- 20" Camper shell window struts -- Most suitable support weight is 30-45 pounds.
- if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
- If you find the pressure not fit after installing, DO message us.
Check Stock
aohua Center Console Dashboard Vinyl Wrap Cover Gloss Carbon Fiber Interior Pre-Cut Armrest Console Panel Protective Decoration Sticker Accessories for BMW X5 F15 X6 F16 2014 2015 2016 2017 2018
- Complete wraps kit accessories custom cut to fit all BMW X5 F15 X6 F16 2014-2018. This pre-Cut vinyl film wrap kits has been custom designed to be easily applied over your stock center console,cup holder,dashboard,door handle,door sill scuff guard etc..
- Upgrade the center console and dashboard: Keep scratches, smudges, fingerprints and dust off your BMW X5 F15 X6 F16 2014-2018 with the simple way. Made of durable vinyl in gloss black, this wrap can protect your center console, also seamlessly blends into your BMW X5 X6 interior with a premium finish..
- Material: Durable PVC materialhigh-strength & high stability: RESISTANT from wrinkle, wear, water, corrosion, high and low temperature.No bubbling and curling after installation..
- Carbon Fiber Pattern: Exquisite textured 5D gloss carbon fiber pattern,gloss black smooth surface.Special carbon fiber sticker decoration parts that keep your vehicle unique and eye-catching, instant upgrade the appearance.Freshen up the interior of your car with this car sticker accessories..
- Easy Installation: No damage installation,No curling problem, you can peel it off and reapply if necessary,traceless backing adhesivesticky enough(highly recommend to use heated gun during the installation) but leaving no residue when peeled....
Check StockFivepine 4Pcs Universal Truck Topper Clamp Camper Shell mounting Clamps Fit for Toyota Ford Dodge Chevy
- 【widely Used】Mount your truck caps, pickup rack, truck bed cover, and camper shell brackets with the topper Clamps..
- 【Anti-loose Design】The sturdy aluminum alloy structure ensures maximum strength, and the slotted jaws provide a firm grip..
- 【Easy Installation】Solved the trouble of drilling. Just tighten the provided bracket bolts..
- 【Universal design】Compatible with Chevy Silverado and Sierra 1500 2500 3500, Dodge Dakota and RAM 1500 2500 3500, Ford F150 F250, Mitsubishi Raider, Nissan Titan, and Toyota Tundra..
- 【Perfect Size】Each truck bed shell clamp extends up to 5 inch tall and has a 1-1/2 inch opening space..
Check Stockvikofan 4Pcs Truck Cap Mounting Clamps Camper Shell clamp Fit for Chevy Silverado Sierra 1500 2500 3500,Dodge Dakota Ram 1500 2500 3500, F150 F250,Toyota Tundra
- Truck Rack Mounting Clamps can pickup rack, truck bed cover, and truck camper shell brackets with the Truck Canopy Clamps..
- Truck Rack Mounting Clamps Fit for Chevy Silverado and Sierra (select models), Dodge Dakota and RAM, Ford F150, Mitsubishi Raider, Nissan Titan, and Toyota Tundra..
- Material:Made of aluminum,high quality and strength,hard to be corroded..
- Package included: 4 truck topper clamps..
- Easy to install: 2 piece pickup topper clamps work with bolt action to assemble around large camper mounting brackets and truck bed lip.
- Bolt tightens quickly with wrench or ratchet.
Check Stock
RV Tail Lights,POVTOR 57 LED RV Camper Trailer Tail Lights With Running/Turn Signal /Brake/Stop License Plate Light Surface Mount RV Led Tail Lights
- 【Unique US Flag Design 】:Rv trailer lights come with four functions,which are running light/turn signal light/Brake light/license plate light.Built with US Flag design,upgraded your RV Camper or Trailer a unique and stylish look on the road.IP67 waterproof,the lens and the rear shell are tightly connected with waterproof silicone,50000 hrs life span, could work at all conditions.Upgrade cooling system,maintain 65 ℃ after lighting tested over two hours at maximum power..
- 【High Performance LEDs】Used High intensive 57 PCS LEDs in total,each led camper tail light employs 24PCS quality red led chips,one of the led rv tail light built with license plate holder and 9PCS high brightness white leds for license plate,others only have 5PCS leds for license plate! Outputs amazing bright and stable RV Tail light. Features better visibility and safety, also add a bonus of charming light for your night trip..
- 【EASY INSTALLATION】:The rv camper tail lights designed with 3 specific colored wires for easy connection.Black wire is negative,Red wire is brake light and turn signal light, and Yellow wire is running light.The license plate light will be also light up,when the running light is on.Come with instructions,and this rv tail lights have mounting ho....
Check StockARANA C16-06874 17 inch Gas Struts Shocks ML36-40 17' 40LB Lift Support Gas Prop for Truck Camper Shell Pickup Topper Leer Cap Canopy Door Truck Cap Engine Cover, Set of 2
- ✅17 inch 40Lb Gas Struts -- Extended Length (Center-to-Center): 17.10 inch.
- Compressed Length (Center-to-Center):10.80 inch.
- Force: 80 Lbs (356 N) Per Strut, 2 Struts per set, not 1.
- ✅ C16-06874 ML36-40 17 inch Gas Spring -- ARANA C16-06874 ML36-40 struts could be used as the replacement parts for camper shell, leer cap , Snugtop Shell, truck camper, truck cap, pickup topper, canopy door, engine cover, etc..
- ✅17 inch 40lb Gas Prop Struts -- Please confirm the Interchange Number of your old struts if you use the struts as the replacement, and re-check the length before purchasing to avoid buy wrongly.
- ✅18 Months Support-- If any questions or dissatisfaction before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!.
Check Stock
C16-08316 C1608316 20' 40 Lbs Gas Struts Prop Shock 20 inch for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs ARANA
- 20" Camper shell window struts -- 2 struts each package, Extended Length (Center-to-Center): 19.69 in (500mm), Force: 40 Pounds Per Strut, Suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS.
- 20 inch Truck cap lid lift supports -- [Interchange Part Number] -- Compatible with the following OEM Numbers:C1608316,C16-08316,C1621705,C16-21705,C1622180,C16-22180,SG327005.Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
- 20 inch 40 Pound gas struts -- Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
- NOTE: If the lid weight is less than 32lbs or more than 45 pounds, please choose other pressure struts!!!.
- 20" 40 lb gas shocks -- Most suitable support weight is 30-45 pounds.
- if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
- If you find the pressure not fit after installing, DO message us and let us send a new set with proper pressure!.
- 18-month Support -- If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "Ask Seller" ....
Check StockAPI Clamps (6 Pack) Silver Compatible with Toyota Tacoma - 2005 & Newer - Mounting Channel Track Truck Topper Cap, Camper Shell
- 【widely Used】Mount your truck caps, pickup rack, truck bed cover, and camper shell brackets with the topper Clamps..
- 【Anti-loose Design】The sturdy aluminum alloy structure ensures maximum strength, and the slotted jaws provide a firm grip..
- 【Easy Installation】Solved the trouble of drilling. Just tighten the provided bracket bolts..
- 【Universal design】Compatible with Chevy Silverado and Sierra 1500 2500 3500, Dodge Dakota and RAM 1500 2500 3500, Ford F150 F250, Mitsubishi Raider, Nissan Titan, and Toyota Tundra..
- 【Perfect Size】Each truck bed shell clamp extends up to 5 inch tall and has a 1-1/2 inch opening space..
Check StockSet of 4 - 2013 Ford F-150 SVT Raptor Supercrew 1/46
- Officially Licensed 2017 Ford Raptor Body with camper shell.
- Direct Fit Onto the 12.8″ Wheelbase TRX-4.
- Transform your TRX-4 into an Aggressive 2017 Ford Raptor.
- Lighter Than Stock for Improved Performance.
Check Stock 
