Reviews Externamonitor For Bmpcc 4k

MEKE 16mm T2.2 Large Aperture Manual Focus Prime Low Distortion 4K Mini Cine Lens for Micro Four Thirds M4/3 MFT Compatible with Olympus/Panasonic Lumix Cameras and BMPCC 4K Zcam E2 GH5 GH6 OM-1

  • Compatible with Micro Four Third mount cameras such as BMPCC 4K Zcam E2 GH5.
  • Lens Not Attached : MANUAL LENS needs you to enable “M mode ” or “Release without lens” in the setting of camera.
  • The equivalent focal length is 32mm on Micro 4/3 mount camera bodies.
  • Delivery image withs smooth, circular bokeh and little to no focus breathing.
  • Lens consturction of 13 elements in 10 groups, capable of delivering sharp and clear video.
Check Stock

SMALLRIG SSD Mount Bracket SSD Holder for Samsung T5 SSD for SanDisk SSD for SanDisk SSD T5 Compatible with SMALLRIG Cage for BMPCC 4K & 6K for Z Cam E2 & for Sigma fp - BSH2343

  • 【UNIVERSAL HOLDER FOR SSD】Firmly secure your SSD on your camera or camera cage, you can choose SmallRig external SSD Mount BSH2343. This....
  • 【MOUNTS ON CAMERA DIRECTLY】This holder could mount an SSD directly on cameras such as for BMPCC 4K & 6K, for Z Cam E2, and for Sigma fp.
  • 【FLEXIBLE INSTALLATION】This holder comes with a detachable cold shoe which can be fixed on the bottom or side of the holder, so you can mount the....
  • 【USB-C CABLE CLAMP INCLUDED】It comes with a cable clamp to fix the USB-C cable, fastened by a knob screw. This SSD holder is compact and versatile....
  • 【RUBBER CUSHIONS】The external SSD bracket features soft protective rubber pads inside, keeping the SSD securely in the clamp and preventing....
Check Stock

MAGICRIG BMPCC 4K /6K Cage with NATO Handle + T5 SSD Card Mount Clamp for Blackmagic Pocket Cinema Camera BMPCC 4K /6K

  • MagicRig Cage Kit for Blackmagic Design Pocket Cinema Camera 4K & 6K. This cage of anti-twisting and excellent heat dissipation for better shooting without making any damage to your valuable camera.【Not for BMPCC 6K Pro!】.
  • Perfectly compatible - Form-fitting design with unobstructed battery & SD card access. Securely locked by 1/4'' screws on the top and bottom, with additional locating pins and rubber pads on the base plate to prevent twisting..
  • Multiple mounting interfaces. The cage is equipped with multiple 1/4'' and 3/8'' screw holes that can be used to install monitors, microphones, flash and other accessories..
  • T5 SSD card holder. Two M5 knob screws are used to lock the T5 SSD and its USB-C cable. There are a variety of mounting options to give you more options. The mount can be mounted on the camera mount with two M4 screws or Two 1/4" screws..
  • It consists of a cage with a NATO handle and a T5 card holder. This handle is equipped with the hole pattern for ARRI accessory mount pins, you can attach compatible extension blocks, als....
Check Stock

Fotga Battery Mount Plate Adapter for Sony BP-U60 BP-U30 U70 U90 Battery to Power Blackmagic BMD BMCC BMPCC BMPC Pocket Cinema Camera,Device w/ 5.52.5mm Input Extra DC5521 for Another Device

  • The battery mounting plate can be mounted on to BlackMagic Cinema Camera with the 1/4" Screw.
  • The battery mounting plate allows you power your BlackMagic Cinema Camera with BP-U60 / U30 battery,or device with 5.5*2.5mm input.
  • If you are the user of PMW-EX1R EX1 EX3 F3 EX160 EX280, it could be your great, because you needn't to buy extra battery now to power your BlackMagic....
  • Output voltage:14.8V.In addition, there is a jack (OD:5.5mm, ID: 2.1mm ), allow you to power another device.
  • Compatible with: For S0NY BP-U60 BP-U30 batteries. For BlackMagic Production Camera 4K BMPC BMCC BMPCC.
Check Stock

NICEYRIG 15mm Shoulder Pad Support System for DSLR Camera Cinema Camcorder Shoulder Mount Rig with Base Plate Aluminum Alloy 16 15mm Rod Handle Set - 435

  • [ SHOULDER RIG BUILT WITH 15MM RODS ] Universal for DSLR camera, cinema camcorder such as BMPCC 4K/6K/6K Pro, Panasonic G7/G9/GH5, Canon C100/C200/C300, Sony FS7/FS5/F55, BMD URSA Mini, RED, etc. Maximum Payload 22lb.
  • [ LOTS OF MOUNTING OPTION ] Features a cheese plate with plenty room and 1/4'' & 3/8'' threaded holes, which allows you to add accessories like counter-weights, v-mount batteries, magic arm on your shoulder mount.
  • [ EASY TO SETUP AND TAKE OFF ] Quick release via both wingnuts, so you can move the camera from shoulder system to tripod. Secure your camera gear to the base plate with a 1/4'' or 3/8'' screw.
  • [ STEADY HANDHELD SUPPORT ] The 15mm rail-mounted handle set provides a good support for your entire shoulder rig. Made of cow leather, comfortable to hold..
  • [ SUITABLE TO USE ALL DAY ] Constructed from solid aluminum alloy, the rig is light that you won't feel it heavy on your shoulder. Help to release pressure when you do Run-and-Gun shooting or need to keep long time shoots.
Check Stock

Portkeys BM5WR Touch Screen Camera Control Field Monitor for RED Komodo Z CAM BMPCC 4K/6K/Pro and Gimbals |Metal Frame| LUT |2200NIT |5.5“ |SDI 【Official】

  • 【IMPORTANT】BM5WR needs to be updated to the latest firmware to connect to Red Komodo V-Raptor. Support Wi-Fi control RED Komodo,Bluetooth control BMPCC 4K, 6K, 6K Pro(No Wireless Video).
  • 【High Performance】2200Nit Touch screen monitor with aluminum frame.
  • 3G-SDI/HDMI signal supports.It allows you to make better videos.
  • 【Tilta Nucleus N/M Follow Focus】Wired connect to motor out on BT1 for control. Including CAL、A/B Point、Follow Focus. Power supply to Tilta Nucleus Follow Focus system.
  • 【Charging Method】Compatible with NP-F970/F960/F750/F550，or you could use PortKeys 12V-2A Power Adaptor with Aviation Connector to power camera monitor.
  • [NOTE] The manual is in the USB flash drive. BM5WR can control various camera models with touch screen,We provide Lanc and USB-C control cables, if your camera is not these two control interfaces, please purchase the control cable separately.
Check Stock

NICEYRIG 15mm Rod Rail Shoulder Rig Support System Applicable for Canon C300 C200 C100 Sony FS7 FS5 FX9 RED DSMC2 Cinema Camcorder and DSLR Camera Rosette Mount Heavy Rig - 410

  • [ SUITABLE FOR HEAVIER RIG ] Main structure is made of aluminum alloy with M6 thread ARRI standard rosette connecting. It is very solid to held your entire heavier rig system..
  • [ HIGH COMPABILITY ] Applicable for DSLR camera, cinema camera and camcorder such as Sony Alpha A7RIV/A7RIII/A7SIII/A7RIII/A7III, BMPCC 6K Pro/6K/4K, Canon C300/C200/C100, Sony FS7/FS5/F55, BMD USA Mini, RED DSMC2, etc. Optional Niceyrig Riser Plate 403 for replacing if necessary.
  • Equipped with two ARRI standard rosette adapters on the 15mm rod baseplate, it allows to directly attach rosette mount rail handles or extension arms.
  • The shoulder pad comes with a large cheese plate with plenty room and 1/4’’ & 3/’’threaded holes, so you can add various accessories like counter-weights, v-mount battery, articulating arm for rich rig possibilities.
  • Ergonomically designed, the shoulder rig system is very comfortable during long time shooting. Helps to making steady videos and release the equipment pressure on the shoulder.
Check Stock

MEKNIC Camera Base Plate with Dual 15mm Rod Rail Clamp for Suitable for All Kinds of Rabbit cage and DSLR Rig Support System with Tripod Mounting Baseplate (Premium)

  • ... allows to attachment of 15mm rods, then lens supports, matte box, follow focus, etc..
  • ✅【Camera Rig Mounting】:The MEKNIC baseplate camera clamp features standard 1/4"-20 & 3/8"-16 screw for connection of any cameras (such as for Sony A6300 A6500 A7SIII, BMPCC 4K & 6K).It provides 1/4'' and 3/8'' holes on the bottom for quick mounting a cage onto a tripod or any other plates..
  • ✅【DSLR Shoulder Rig Widely Applications】:It could be used to mount camera, cage and tripod. To access the baseplate attached to the camera, cage or tripod, you need to remove the second plate..
  • ✅【MEKNIC Camera Base Plate stand Stable Design】: Connecting pipes through four holes, this product is stronger than other products (which connects with three holes).
  • This product is made of a piece of aluminum alloy, which is more durable than other designs..
  • ✅【Rubber Cushions】: There are rubber cushions on the base plate, which increases friction for cameras to prevent the twisting. Also, the rubber cushions can protect the camera be scratched with this MEKN....
Check Stock

KOCACKOO V-Mount Lock Battery Plate Power Supply Splitter Adapter with 15mm Rod Clamp + LP-E6 Dummy Battery for BMPCC 4K/6K、DSLR RED Cameras、Camcorders、Canon 5D2/5D3/5D4/6D/6D2/7D/7D2/70D/80D/5DSR

  • ★ Smart and wide applications power output systems.With the help of the battery plate Power up monitors, DSLR cameras, mobile phone, led lights, on camera flash, etc..
  • ★ Compatibility:Including but not limited to Canon 5D2, 5D3, 5D4, 6D, 6D2, 7D, 7D2, 70D, 80D, 5DSR,5D MarkII, 5D markII ,5D Mark IV and BMPCC 4K/6K etc..
  • ★ The V lock battery plate features a 15V DC barrel output, an 8V DC barrel output, a 12V DC barrel outputs, a 5V DC barrel outputs, a D-Tap output and two USB port. A power switch is provided on the side to turn everything on or off..
  • ★ 15mm Rod clamp which suit for 15mm rod pass through on DSLR rigs and gimbals. V-Lock Mount which access the quick release the battery attachments..
  • ★ Package Include:1 x KOCACKOO V-Lock Plates. 1 x LP-E6 Dummy Battery Adapter. 1 x 5.5 * 2.5mm DC to DC Spring Cable. 3 x DC Cable. 1x Storage bag..
Check Stock