Reviews External Power Supply

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10, Linux, Ubuntu, MacOS systems, no need drive file, plug and play. If the USB device needs to be restarted, the device can be powered off and restarted through the switching power supply without plugging and damaging the interface..
  • Size support Raspberry Pi stack installation -- Support installation of Raspberry Pi 4B/3B+/3B,The kit contains the exclusive copper column screw accessories for jetson nano and raspberry pi, the material is of reliable....
Check Stock

ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

  • It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
  • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock

HiLetgo USBTiny USBtinyISP AVR ISP Programmer 6/10 Pin Bootloader for Arduino UNO MEGA

  • Power supply options: external power supply and USB power.
Check Stock

NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller

  • The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
  • Onboard square USB interface, stable connection.
  • use of high-performance USB control chip.
  • use dedicated relay driver chip ULN2803, relay work more stable.
  • Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
  • 【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • 4.4mm output: balanced headphone out/balanced line out.
  • RCA coaxial port: coaxial input and output.
  • USB 3.0 port: supports USB Host and Device modes, can be used for high-speed data transfers and fast charging.
  • USB 2.0 port: supports USB Host mode, allowing external DACs or hard drive storage to be connected..
  • [Desktop-tier heat dissipation]: With exceptional audio quality comes with large power consumption, so effective heat dissipation was a large focus when designing the M17 music player. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by external DC power. The battery power supply allows you to use the M17 lossless mp3 player in situations where there is no access to a power outlet. Under DC power supply, voltage in the analog circuit is increased by 35% up to 11.5V compared to under battery power supply.
Check Stock

Mini DVD Player for TV Portable Region Free Little HD DVD Players with HDMI Headphone Remote Compact CD/DVD Player ARAFUNA

  • COMPACT DESIGN Little DVD Player：ARAFUNA Mini HD DVD / CD players built-in latest HD decoding chip is simple and compact design, its size is....
  • REGION-FREE: This Super Mini DVD palyer not only can decode all region movies(Blu-ray is not supported), but also supports multiple formats of video....
  • HDMI CONNECTION: HDMI cable is included in this mini DVD/CD package, you can connect to a TV, projector or display screen, easily achieve....
  • HIGH-QUALITY SURROUND MUSIC: This portable CD player can be used as a walkman or a car CD player(need an external power supply, such as a power bank),....
  • LOW POWER CONSUMPTION: 5V USB interface external power supply. You only need to connect it to a power bank or a computer to use it. Whether you are....
Check Stock

HKY 24V AC Adapter Compatible with All ResMed S9 Series CPAP and BiPAP Machines Res Med S9 AutoSet /AutoSet for Her /Elite /Escape Auto /Escape /VPAP Series Replacement 90W ResMed S9 Power Supply Cord

  • ✅【Amazon's Choice】Fits Resmed S9 Series CPAP and BiPAP Machines: Resmed S9 AutoSet / S9 AutoSet for Her /S9 Elite / S9 Escape Auto / S9 Escape / S9 VPAP Auto / S9 VPAP Adap / S9 VPAP S / ST /S9 VPAP Tx.
  • Replacement 90-Watt ResMed S9 Power Supply Model No. 369102 36821 External Power Supply.
  • Also Replacement ResMed 30W IPX0 IPXO R360-761 (WA-30A24UGKN) +24V 1.25A 3-Prong Connector Power Supply External 30 Watt Power Supply for ResMed S9 Machines.
  • ✅【Specifications & 3 YEARS Warranty Guarantee】Input:100-240V,50-60Hz.
  • Power Cable Include.⚠️PLS NOTE: This CPAP Machine Power Supply Only compatible with ResMed S9 Series,((( NOT FIT ❌Resmed 11 or ❌Resmed 10 or ❌Resmed s8 Series)))) Please confirm the specifications and plug size before purchasing!If you can't make sure,pls feel free to contact us!!! WARRANTY: 90 Days Money Back Guarantee - 36 Months Free Exchange - 24hrs Email Service Supoport..
  • ✅【International Safety Certification】Our products have passed the CE / FCC / RoHS test and Got the certificates. Replacment charger for Resmed S9 Series Res Med IPX1 CPAP Machine S9 H5i REF 36003 R360-760 DA-90A24 CPAP 36970 S9 Elite Machine S9 Escape Machines Resmed 9 CPAP machine Resmed S9 CPAP Power....
Check Stock

REXQualis Nano V3.0, 3pcs Nano Board CH340 / ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 with 3 Cable)

  • √ REXQualis Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system..
  • √ REXQualis Nano is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
  • √ REXQualis Nano is Using Atmel Atmega328P-AU MCU, Support ISP download and USB download, Power via the Mini-B USB..
  • √ The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check Stock