Reviews Expansion Chucking Reamers

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
2" flute length, Partial Flute Length Carbide.
Morse taper shank #4, For Reaming Abrasive Material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
1 7/8 " flute length, Partial Flute Length Carbide.
Morse taper shank #4, For Reaming Abrasive Material.
This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

Straight shank expansion reamers mount to the chuck of a drill press or similar machining tool.

Straight shank expansion reamers mount to the chuck of a drill press or similar machining tool.

Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
Size Infor: Length of chucking reamer is 6.5 inch.
Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

6" extension threads into 9" chucking extension for 15" length.
Drill bit extension set has male and female thread size of 1/4-28.
Drill extension set is black oxided to prevent corrosion and enhance appearance.

Bridge Reamers are also called Construction Reamers.
Bridge reamers are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes.
Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.

Bridge Reamers are also called Construction Reamers.
Bridge reamers are used to align existing holes prior to bolt or rivet installation.
Point is tapered to permit entry into overlapping holes.
Short length facilitates use in areas with limited access with three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
High speed steel for use in a wide range of materials such as Aluminum, Brass, Bronze, Cast Iron, Copper, Iron, Metal, Nickel, Plastic, Steel.

Hex shank bridge reamers are high speed steel and are used to align existing holes prior to bolt or rivet installation. Black and gold Killer Force (KFD) hex shank bridge reamers are manufactured from premium grade high speed steel..
Point is tapered to permit entry into overlapping holes..
Heavy-duty hex shank has six flats and is designed for portable pneumatic tools.