Reviews Exhaust Pressure Sensor

ACDelco GM Original Equipment 13598772 Tire Pressure Monitoring System (TPMS) Sensor Kit with Sensor, Stem, Bolt, and Cap

  • 【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with scan tool. The specific operation is as follows Step 1: Select “Check Sensor” in ATEQ scan tool. Step 2-4: Select vehicle brand and mode year. Step 5: Select tire location then push button to trigger . Step 6: Wake up sensor successfully and display sensor information on screen..
  • [Best TPMS sensor material] The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃.
  • 【PROFESSIONAL TPMS SENSORS】The Tire pressure monitor system (TPMS) sensor is specifically designed to match the original design and performance of the tire pressure transmitter on GM Brand Car.
  • 【FULL TESTED】Every Tire pressure monitoring system(TPMS) is tested before it is shipped to customers,includes Exterior，battery life,frequency signal,PSI accuracy to ensure trouble-free installation and performancereliability, durabilitiy and safety.
  • 【GOOD SERVICE】Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service..
Check Stock

DNA MOTORING CBE-ARSX-NS-BT Stainless Steel Cat Back Exhaust System [Compatible with 02-06 Acura RSX DC5 Non Type-S]

  • 【FITMENT】Compatible with 02-06 Acura RSX DC5 Non Type-S.
  • 【Quality Construction】Made of high quality steel with computerized mandrel-bends for strength and durability.TIG welded CNC machine for resistance against pressure and corrosion.. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Inlet / Outlet Diameter: 2.5" OD / 2.5" OD.
  • 4" Double Walled Round Diagonal Cut Polished Muffler.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

MARSFLUX Oxygen O2 Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires

  • 【Compatible】O2 Oxygen Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires. OE:250-25001. Please enter the year, make and model number....
  • 【Professional Manufacturing】 O2 oxygen sensor is manufactured in strict ance with the original standard, stable performance, excellent....
  • 【Excellent Quality】 The oxygen sensor is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones,....
  • 【Operating Principle】The role of the oxygen sensor is to determine whether there is excess oxygen in the exhaust after engine combustion and to....
  • 【Fast Shipping & Warranty Commitment】O2 oxygen sensor shipped directly from the USA within 2~5 working days, warranty 2 years. Please enter the....
Check Stock

Autokcan TPMS Relearn Tool OEC T5 Super EL-50448 Compatible with GM Tire Pressure Monitor Sensor TPMS Reset Tool

  • ✱[Tire Pressure Relearn Tool]:Autokcan EL-50448 is an essential tool as tire pressure sensor replacement, tire pressure alarm remover or exchange....
  • ✱[Easy TPMS Reset tool]:OEC-T5 EL-50448 tpms reset tool can help you reprogram all tires much easier within just 3 steps.Tire pressure monitor....
  • ✱[How to Use]:Before u use the EL50448 tire pressure sensor tool,make sure u set the car into TPMS Learn Model and follow the car light....
  • ✱[Attention]:Make sure that there is TPMS sensor function in your tires.Watch carefully the vehicle coverage inside the link picture..
  • ✱[Perfect Automotive Tire pressure Monitor Sensor]:We support 12 months warranty for this tire pressure tool.Contact us freely if u meet any prblem....
Check Stock

ACDelco Professional TPMS173K Tire Pressure Monitoring System (TPMS) Sensor with nut

  • 【Professional Tpms Sensor】 13586335 Tire Pressure Sensor is specially designed to match the original design and performance of General Motors tire pressure transmitter.in real-time by recording the tire speed or electronic sensors installed in the tire, which can provide an effective safety guarantee for driving..
  • 【Replace Part 】 13586335, 13581558, 13598771, 13598772, 13598255, 15921013, 25799331, 22853741, 15920615, 15123145, 25952370, 15254101, 12768826, 15922396, 20923680. Taking into account the quality of the product and personal safety, this tire pressure sensor has been tested before shipping..
  • 【Tpms Sensor Compatible With】 Fits for 2007-2011 Buick Lucerne, 2007-2018 Cadillac Escalade, 2009-2011 Cadillac sts, 2008-2018 Chevrolet Express 1500/2500, 2008-2017 Chevy Malibu, 2007-2018 Chevrolet Silverado 1500, 2007-2017 Chevy Tahoe, 2008-2011 HHR,2008-2009 Hummer, 2007-2014 Yukon, Pontiac, Saturn, Please See the Fitment Below..
  • 【Installation Procedure】 315MHz Programmed Tire Pressure Monitoring System Sensor (TPMS) does not require programming. The specific operation is as follows Step 1: Select “Check Sensor” in ATEQ VT46. Step 2-4: Select vehicle brand and mode year. Step 5: Select tire location then push button to trigger . St....
Check Stock

DNA MOTORING CBE-WRX02 Cat Back Exhaust System [Compatible with 02-07 Subaru Impreza WRX/WRX STI]

  • 【FITMENT】Compatible with 02-07 Subaru Impreza WRX/ WRX STI.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

  • 【FITMENT】Compatible with 1990-1999 Mazda Miata.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

  • EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
  • DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
  • PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
  • PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
  • WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).
Check Stock

DNA MOTORING CBE-HP92-NRT Cat Back Exhaust System [Compatible with 92-96 Honda Prelude]

  • 【FITMENT】Compatible with 92-96 Honda Prelude.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】4"(Od) rolled Muffler tip/ 3"(od) inlet/ 14mm thick double walled tips.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock