Reviews Ethernet Converter Module

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

  • 【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
  • 【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
  • 【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
  • 【FAN Header】5V/12V, allows speed adjustment and measurement.
  • 【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.
Check Stock

2-Pack 12V to 5V USB, Aideepen DC 12V 20V to 5V USB Adapter DC 12v to USB DC Buck Converter Module DC to DC Car Power Converter(Dual USB)

  • 【12V to 5V 】12V to 5V DC Converter Buck Module with Dual USB Female Socket Charging Cable. (8-20V Wide Range Input) Max Current 3A, Power 15W..
  • 【Durable】this DC to DC Converter With Overcurrent protection, Overvoltage protection, Over temperature protection, Short circuit protection . with stable and sturdy performance..
  • 【Low loss】This 12V DC to USB adapter integrates a switch thin voltage regulator module, and the conversion rate is up to 96%..
  • 【Dual USB】2 USB ports, suitable for GPS navigation, driving recorder, car audio, MP3/ MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED ect..
  • 【Note】when using a voltage converter, the power of the device must be less than 15W.
  • The DC reduced voltage converter is not compatible with partial Samsung phones.If you have any problems, please feel free to contact us..
Check Stock

StarTech.com Singlemode (SM) LC Fiber Media Converter for 1Gbe Network - 10km - Gigabit Ethernet - 1310nm - with SFP Transceiver (ET91000SM10)

  • ETHERNET OVER FIBER EXTENSION: Use this full / half duplex fiber media converter to convert and extend a Gigabit Ethernet connection up to 10km (6.2mi) using singlemode LC fiber cable..
  • INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver (mini gbic), enabling an 1310nm LC single mode Gigabit fiber connection..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable steel housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

DC-DC Converter Module Boost DC Step Up Voltage Regulator CV Stabilizer Power Supply Module 10-60V to 12-97V 1500W 30A

  • Stable Output: Boost module has high power and stable output, and it can also convert 10-60VDC to 12-97VDC..
  • Intelligent Temperature Control: It adopts intelligent temperature-controlled fan design, and automatically works when the temperature reaches 60°C or so. It stops when the temperature is lower than 60°C..
  • High Conversion Efficiency: Step up module is made of high quality components, ensuring high conversion efficiency up to 97%..
  • Long Service Life: Boost converter is a non-isolated DC power converter module with a long service life..
  • Widely Used: It is widely used in high-power solar street lights, various LED lighting CV drives, car and mobile equipment power supplies, DIY adjustable CV power supplies, solar charging, and various battery charging..
Check Stock

Cable Matters Wall Mount HDMI Extender (HDMI Over Ethernet Cable) with TCP/IP Support for 1-to-Many Setup - Up to 300 Feet

  • 300 foot HDMI extension - extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
  • HDMI over Cat5/Cat6 cabling operates up to 300 feet.
  • HDMI Balun Extender boxes are surface mountable with included brackets and screws.
  • Comes with bonus 2-Pack of High Speed HDMI cables.
  • Digital integrity multiplied - connect directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
  • Do not connect through a LAN or router with other data traffic.
  • Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
  • Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
  • The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix equi....
Check Stock

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

  • The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
  • The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
  • Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
  • RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
  • USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

RPi 3.3V to 5V 26 I/O Bidirectional Voltage-Level Shifter Module for Raspberry Pi, Logic Level Converter

  • Reliable and suitable for a wide range of uses..
  • High conversion efficiency, simple regulating operation..
  • Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
  • The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
  • It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..
Check Stock

GL.iNet GL-XE300 (Puli) 4G LTE Industrial IoT Gateway, T-Mobile Only, Router/Access Point/Extender/WDS, OpenWrt, 5000mAh Battery, OpenVPN, Remote SSH, WPA3, IPv6 (EC25-AF), for North America only

  • 【SMART 4G TO WI-FI CONVERTER】Come with a standard nano-SIM card slot that can transfer 4G LTE signal to Wi-Fi networking. Up to 300Mbps (2.4GHz ONLY) Wi-Fi speeds. It can move into a 4G LTE wireless network if the Ethernet Internet fails, in order to ensure constant data transmission..
  • 【OPEN SOURCE & PROGRAMMABLE】OpenWrt pre-installed, unlocked, extremely extendable in functions, perfect for DIY projects. 128MB RAM, 16MB NOR + 128MB NAND Flash, Max. 512MB MicroSD card support. Dual Ethernet ports, USB 2.0 port, Antenna SMA mount holes reserved. Perfect for further extension and share files across devices..
  • 【SECURITY & PRIVACY】OpenVPN & WireGuard pre-installed, compatible with 30+ VPN service providers. With our brand-new Web UI 3.0, you can set up VPN servers and clients easily. IPv6, WPA3, and Cloudfare supported. Level up your online security..
  • 【Easy Configuration with Web UI 3.0 and GoodCloud】GoodCloud allows you manage and monitor devices anytime, anywhere. You can view the real-time statistics, set up a VPN server and client, manage the client connection list, and remote SSH to your IoT devices. The built-in 4G modem supports AT command, manual/automatic dial number, SMS checking, and signal strength checking in Web UI 3.0 for ....
Check Stock