Reviews Er Collet

RATTMMOTOR 110V Water Cooled Spindle Motor 2.2KW 80mm CNC Spindle Motor ER20 24000RPM 400HZ+2.2KW VFD Drive 110V Inverter Converter Spindle Motor Speed Controller+ER20 Collets for CNC Router Machine

Notice: (1)The spindle speed can't be lower than 9000rpm!!!! (2) This spindle only supports clockwise rotation, not reverse rotation. (3)This Spindle....
【14pcs/set ER20 Collets】Size: 3.175mm,1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm..

For 3/4″ x 16 Spindle Adapter & 5pcs ER32 collet.
5 Collets: 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch and 3/4-Inch.
Excellent gripping for small diameter dowels and tenons.
Perfectly designed to hold a pen mandrel, and other small wood projects where a tenon is used.
1-Inch by 8TPI thread with 3/4-Inch by 16TPI spindle adapter, with collet closing head.

✅Technical Parameters: Spec: Φ3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm).
✅Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature,....
✅Package include: Square Spindle Motor, Inverter, ER11 Collet.
Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood,....
✅Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping....

25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
Widely used in boring, milling, drilling, tapping, grinding and other processing.

♞【2.2KW Water Cooled Spindle Motor】Operating Speed:0-24000rpm.
♞【2.2KW Inverter VFD 110V】Input Voltage: 110V(+/-15%).
♞【80mm Clamp】Diameter: 80mm Material: Aluminum,Cast aluminum.
♞【80W Water Pump+6M Pipe】Pump length:3.2m.
♞【14Pcs ER20 collet】Full set including 1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.

【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.

【Powerful Bearings】Adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and anti-rust....
【High Precision Collet】ER20 Standard Collet, The collet of the CNC spindle is quenched with manganese steel, and the runout is less than 0.005 mm,....
【Low Noise】The dynamic balance technology can effectively reduce the noise during use. The scientifically designed water circulation system has a....
【Characteristic Advantage】Shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.Advanced dynamic balance....
【WARRANTY ASSURANCE】Half a year warranty,you can contact us if you have any problems, we will carry out after-sales service for you.

Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
As milling machine accessories, convenient to replace the broken one.

As milling machine accessories, convenient to replace the broken one.
Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.