Reviews Engine Transmission Oil Cooler

Cool Your Engines (Original Mix)

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

5184294AE Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible with 2011-2013 Chrysler 200 300 Town & Country, Wrangler, Dodge Charger, Ram 1500 V6 3.6L

  • [Fitment] 5184294AE engine oil cooler fit for2011-2013 Chrysler Town ＆ Country, 2011-2013 Chrysler 300, 2011-2013 Chrysler 200, 2011-2013 Dodge Journey, 2011-2013 Dodge Grand Caravan, 2011-2013 Dodge Durango, 2011-2013 Dodge Charger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Avenger, 2012-2013 Jeep Wrangler , 2011-2013 Jeep Grand Cherokee, 2012 Ram C/V, 2013 Ram 1500.
  • Replace Part Number] 5184294AC, 5184294AD, 5184304AD, 5184304AE, 5184304AF, 5184294AE oil filter housing with Oil Filter Housing Adapter Assembly Sensor..
  • [Feature] Engine oil cooler made of 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency. Helping to extend the life of the oil and engine. The engine oil cooler can keep the engine oil cool and clean..
  • [Perfect Replacement] Our oil cooler and filter housing kit with sensors and gaskets can perfect replacements for damaged ones and work flawlessly..
  • [ Warranty ] We provide a 6-month warranty,If you have any questions,please contact us via amazon, and we will reply you within 24 hours..
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Feoie 926-876 Aluminum Engine Oil Filter Housing with Oil Filter and Cooler Sensors Assembly Fit for 2011-2016 Chrysler 200 300, Dodge Charger, Jeep, Ram 1500, Promaster, 3.6L V6, 926-959 68105583AF

  • [ Perfect Replacement for Plastic Oil Filter Housing ] - The original plastic oil filter housing was prone to damage and leaks and allowed debris to enter the oil on a regular basis, which could damage engine components and clog the oil filter. Our upgraded oil filter housing is made entirely of aluminum to prevent leaks, cracks, and warping, which is a perfect replacement for plastic oil filter housings.
  • [ Fitment ] - Aluminum oil filter housing for 2014-2016 Jeep Grand Cherokee | 2014-2016 Jeep Cherokee | 2014-2016 Jeep Wrangler | 2011-2016 Dodge Journey | 2014-2016 Dodge Charger | 2011-2016 Dodge Challenger | 2011-2016 Dodge Durango | 2011-2016 Dodge Grand Caravan | 2011-2014 Dodge Avenger | 2013-2016 Ram 1500 | 2015 Ram C/V | 2014-2016 Ram Promaster 1500 | 2014-2016 Ram Promaster 2500 | 2014-2016 Ram Promaster 3500, 2011-2016 Chrysler 200 | 2011-2016 Chrysler 300 | 2011-2016 Chrysler Town Country.
  • [ Oil Cooler Replacement ] - 926-876 aluminum engine oil filter housing for 926-959 926-876 68105583AF engine oil cooler, 68105583AA 68105583AB 68105583AC 68105583AD 68105583AF 68105583AG, engine oil cooler 5184294AE.
Check Stock

Vintage Monster Truck Are My Jam Retro Sunset Cool Engines Long Sleeve T-Shirt

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock

COMPLETE & UNABRIDGED 1984 CORVETTE FACTORY REPAIR SHOP & SERVICE MANUAL - INCLUDES; 1984 Hatchback, '84 Convertible,

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock