Reviews Engine Swaps For Miata

DNA MOTORING CBE-MM90 Stainless Steel Cat Back Exhaust System [Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L]

【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
【Quality Construction】Made of High Quality 409 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】2.5″ OD Inlet / 2.5″ OD Main Piping.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

[Long Life] The coil pack with premium quality provide high corrosion and temperature resistance, design for high energy output and fast ignition, expanding service life and no worry for misfire..
[What You Get] Fast ignition within 0.1-0.2 seconds | 140°C high temperature and corrosion resistance | RF Interference Protection | 6500Mi Longer lifespan | High voltage output | Smoothly Engine runs. Automotive replacement ignition coils in time can protect spark plugs and engine from damage..
[Compatible Vehicle] Ignition coils compatible with Mazda3 2006-2013, Mazda6 2006-2013, CX7 2007-2012, MX5 Miata 2006-2014. For more models, please check fitment!.
[Reference Number] Ignition coils undergone strict quality control testing, providing excellent performance and reliability. OE Interchange Number: L3G218100, L3G218100A, L3G218100A9U, L3G218100B, L3G218100B9U, L3K918100A, L3K918100B.
[Easy Installation] OE design ensure fast and easy installation with perfect fit. Ignition coil pack set of 6 is included. Please check the compatibility at the top of the page to confirm the part number to match your vehicle and make sure you get the correct coils..

[ IMPORTANT ] VMS RACING BRAND (NOT generic). Comes in VMS Racing Branded BOX. Brand New in Box / Never Used / Never Installed..
Weight = 15 ounces. Lightweight 6061 T-6 billet aluminum. VMS Racing Lightweight Pulley increases HORSEPOWER, TORQUE and FUEL ECONOMY..
CNC Machined to .001 Tolerances (such tolerances usually reserved for the aviation industry). Better than OEM FITMENT & ALIGNMENT. Hard anodized in matte finish Gun Metal, for a long lasting and beautiful finish..
Only OEM size Light Weight Racing pulley on the market! Uses factory sized belts (no need to change the OEM sized belts. OEM size means NO charging or overheating problems. Same Stock SIZE - SAME Stock CONFIGURATION - NO NEED to use different belts!.
Compatible with Mazda Miata 1.8 L .8L Liter Litre BP-4W BP4W Mazdaspeed MX5 MX-5 Turbo Turbocharged Roadster 99 00 01 02 03 04 05 1999 2000 2001 2002 2003 2004 2005 CP549 performance engine swap.

【FITMENT】Compatible with 90-97 Mazda Miata MX-5 1.6L/1.8L.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】2.5" OD Inlet / 2.5" OD Main Piping.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

【UNIQUE DESIGN FOR MAZDA MX 5】This Miata antenna replacement very cute & stubby & more durablewhich & nicely looks with no rough edges. The....
【FITMENT】Fits seamlessly on 2006-2022 Mazda MX-5 Miata RF ND NC. Original factory OEM: NF47-66-A30A，NF4766A30A.
【EXCELLENT RECEPTION】Our interface and spring inner core are made of high-conductivity copper alloy. After hundreds of trials, we have made an AM....
【CAR WASH PROOF】Our Mazda antennas are all made of the highest quality colorful 304 stainless steel, and the interface and spring are made of....
【EASY TO INSTALL IN SECONDS】Upgraded copper interface with original thread and caliber, perfect fit for 2006-2022 Mazda MX-5 Miata models. Install....

Compatible with or fits: 1994 - 1995 Mazda Miata 1.8L 4 Cyl | 1990 - 1993 Mazda Miata 1.6L 4 Cyl.

Stainless Steel ECM Mounting Brackets for LS Series GEN 3 Engine Computers used on 5.7L, 4.8L, 5.3L, and 6.0L LS Engine Swaps. (Vortec 99-06/07 Chevy Gm Trucks 1500 2500 Sierra Silverado and 00-06/07 Tahoe Yukon Suburban Express Avalanche).
Does NOT come with ECM in Pictures. (Reference only make sure your ECM is the same style).
Proudly Made in the USA with USA Made 14gauge Stainless-Steel Sheet these will not rust or corrode. Has Some light scratches from the manufacturing process if wanted, you can paint or polish these to match your engine bay. CNC Laser Cut and Cnc Brake Press for Maximum accuracy. Comes with 4ea SS Bolts..
We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.

Item Description The Tucked Engine Harness is designed as a high quality replacement 02-04 RSX Type-S harness that offers a super clean look. We have made the harness with lots of features so it will work with nearly all K-Series engine swaps and the 02-04 RSX Type S. It includes all the necessary plugs with a handful of extras (Fan Switch, IACV, Temp Sensor, ETC)..
Will fit Following Models K-Swap Cars 02-04 RSX Type S 02-04 RSX Base 01-05 Civic EP3 (Type S or K24 Swap).
Note: *Will NOT fit RHD cars or RWD cars. This Engine Harness Does Not Contain VTEC Plugs..
Features: All plugs included except EVAP and AC Covering is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F) SAE Certified Automotive Grade Wiring All plugs are labeled Tucked design.
Durability matters, that is why our injector harness is constructed from durable, high temperature wire to ensure excellent conductivity. Meanwhile the high-quality materials help to resist corrosion of the injector wire harness, ensuring a long service life.