Reviews Engine Oil Temperature Sensor

Aumzong 926-876 Aluminum Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible with 2011-2017 Chrysler 200 300,Charger Cherokee Wrangler Ram ProMaster 3.6L,Replace 68105583AF

  • ...Caravan丨2011-2016 Dodge Journey丨2011-2015 jeep Grand Cherokee丨2014-2016 jeep Wrangler丨2013-2016 Ram 1500丨2014-2015 Ram CV丨2014-2016 Ram ProMaster 1500丨2014-2016 Ram ProMaster 2500丨2014-2016 Ram ProMaster 3500..
  • Plastic oil cooler shell cannot withstand high temperature for a long time, and it will deform and leak oil after using it for a long time. At this time, it should be replaced in time. As an upgraded aluminum oil cooler shell, It avoids oil leaks and breakage. keep the engine running smoothly for long-lasting use.Don't forget to put some clean oil on the gasket before installation,Make the gasket seal better.
  • Package includes: Oil Temperature Sensor, Oil Pressure Sensor, Oil Cooler, Oil Filter, O-Ring, Intake Manifold Seal. Trust Amazon to deliver goods fast..
  • 1 Year Warranty: Oil Filter Housing Adapter Assemblies are made of High Quality Aluminum Alloy and Factory is 100% Inspected to meet or exceed the standards of original OE parts to ensure Product Reliability and Durability..
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Oil Pressure Switch Filter Fit for Chevy GMC Cadillac Buick Pontiac Engine Valve Lifter Oil Filter Suitable for AFM Fuel Supply Assembly

  • This part is made from quality materials to ensure reliable performance and long service life. This engine oil pressure sensor filter is designed to....
  • Reliable replacement for an original part that has failed due to clogging.This engine oil pressure sensor filter is designed to match the fit and....
  • The primary purpose of this filter is to clean oil that flows into the AFM lifters. Putting it on the AFM oil supply assembly can also protect the oil....
  • Always replace your oil and main engine oil filter when you change this filter. Please check this AFM filter at each oil change until you understand....
  • Getting to the filter housing was a bit of a challenge, but once you got the old filter out, you could see why the truck was running so rough. After....
Check Stock

Veepeak Mini Bluetooth OBD2 Scanner and Extension Cable Bundle

  • NOT COMPATIBLE WITH IOS (iPhone or iPad)! Works with Android devices and Windows PC only. Very useful gadget for car owners to diagnose check engine light and monitor car sensors..
  • Save time and money by finding out why the check engine light is on and fixing simple car problems by yourself! Read engine diagnostic trouble codes, reset check engine light, and check if your vehicle is ready for SMOG inspection..
  • Access a whole new world of information about your vehicle directly on your phone, tablet or PC. View car performance, sensor data (Engine coolant & oil temperature, O2 Readings, Mass air flow, Fuel Trim, etc.), monitor fuel economy, create your own dashboard, log your trips, and more to discover..
  • A third-party OBD2 App is required such as Torque Pro, OBD Fusion, Car Scanner ELM OBD2, Dr. Prius and DashCommand. Some may require separate purchase..
  • 1.2m/3.9ft OBD2 extension cable with one male and one female J1962 connectors. Angled connectors and flat ribble cable for superior flexibility and durability..
Check Stock

Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

  • KEEP YOUR ENGINE WARM: On a cold winter day, use the ABN 250-Watt 4x5 Inch Silicone Rubber Heater Battery Heating Pad 10 or 15 minutes prior to start up for perfect engine oil temperature.
  • Device heats the oil quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
  • IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
  • Increases engine longevity and extends transmission life.
  • EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
  • Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
  • BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
  • Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
  • Power cord stays attached : not removable.
  • FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any ....
Check Stock

Permatex 82180 Ultra Black Maximum Oil Resistance RTV Silicone Gasket Maker, 3.35 oz. Tube

  • Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants.
  • Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent.
  • Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

ECCPP Radiator Cooling Fan Kit Assembly Replacement fit for 2007-2009 Kia Sorento 3.3L 3.8L

  • ...erformance of the original equipment radiators they replace.
  • that extends to all components,including engine and transmission oil coolers.
  • COOLING FAN FUCTION – Engine cooling requires a constant supply of fresh air,The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine,and our cooling fans are powered electronically,It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on.
  • HIGH QUALITY – ECCPP’s assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • ATTENTION – Don’t forget to search for See all vehicles before purchasing the items and you can also look though the information including picture just avoid buying a wrong item.
Check Stock