Reviews Engine Oil Switch

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

The Classic Albums Collection

  • 9500 Running Watts and 12500 Peak Watts (Gasoline).
  • 8500 Running Watts, 11200 Peak Watts (Propane).
  • Remote Start With Included Key Fob, Electric and....
  • Features Two GFCI 120V 5–20R Standard Household Receptacle, One Transfer Switch Ready 120V L14-30R, and One RV Ready 120/240V 14–50R.
  • Powered by a Heavy Duty 457cc Westinghouse 4-Stroke OHV Engine Featuring a Long-Lasting Cast Iron Sleeve With Automatic Low Oil Shutdown and Digital....
  • Plug-and-Play: Comes With a Remote Start Key Fob, 12V Battery Charger, Oil, an Oil Funnel, a Tool Kit, and a User’s Manual to Get You Started Right....
  • All Westinghouse Portable Generators are Functionally Tested in the Factory and May Contain Minimum Residual Oil and/or Fuel Odor.
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

X AUTOHAUX 2pcs Engine Oil Pressure Sensor Switch Sending Unit Replace 28600-P7W-003 28600-P7Z-003 for Honda Accord 2003-2008

  • Fitment: for Honda Accord 2003-2008, for Honda Accord CF8 1998-2001, for Honda Accord CF9 1998-2002, for Honda Accord CG1 1998-2002, for Honda Accord CG5 1998-2002, for Honda Accord CG6 1998-2001, for Honda Accord CM6 2003-2007, for Honda Odyssey 2003-2008, for Honda Odyssey RA8 2000-2008, for Honda Odyssey RA6 2000-2004, for Honda Odyssey RA3 1998-1999, for Honda CRV 2005-2008, for Honda Civic 2006-2008, for Honda Ridgeline 2006-2008, for Honda Element 2007-2008, for Honda Fit 2007-2008..
  • Material: This oil pressure unit switch is made of metal and ABS material, which is more sturdy, durable, and high temperature resistant..
  • Function: Replace the broken or old oil pressure sensor. Help to detect the oil pressure of the vehicle engine and make sure the normal operation of the engine..
  • Easy to install: Just remove the old parts and replace them with new ones. no more oil leak for optimum performance and efficiency to keep the vehicle moving..
Check Stock

HPDAVV 15HP Gas Driven Piston Grade Belt Driven Air Compressor 30Gal ASME Tank with LONCIN Engine 19cfm @ 180psi 3-In-1 Air Compressor Two-Stage Gasoline Welder & Generator

  • 【 Wide Application】 The combination air compressor, generator, and arc welder is the ideal tool for field repairs in remote locations. Save room on your service truck with this versatile all-in-one solution..
  • 【Dependable LONCIN Gas Engine】 Portable power produces 19cfm@180 psi, delivers a quiet operation and maximum reliability, LONCIN engine provides more power for easy starting, less fuel-use & lower emissions, easy to start, works hard, lasts a long time..
  • 【AGW Series Operation】 Generator Mode: AC current only. Selector switch set to idle down. Switch is set to full throttle. Welder Mode: DC current only. Engine must be running full throttle. Selector switch must be set to full throttle. Compressor Pump: Splash lubricated, Stainless-steel braided discharge hose, Large canister intake filter and Oil level sight indicator. Frame: Powder coated ASME coded receiver tanks. 14-gauge powder coated belt guard..
  • 【Standard Warranty】 HPDAVV provided with one-year warranty. We also have some of the best air supplier are able to support the after-sales services..
Check Stock

OTC 3650 Heavy-Duty Remote Starter Switch

  • Allows one person to start or crank engine while under the hood or from either side of the vehicle.
  • Soft, non-slip rubber grip features a high current, heavy-duty push button switch that ensures reliable operation and a long service life.
  • Features a convenient hot circuit indicator with a ready light that glows red when starter switch is connected to a hot circuit and goes off when switch is depressed.
  • 5 foot long leads made from heavy-duty, oil and grease resistant, 12-gauge wire.
  • High current capacity clips, with protective boots, open to an extra wide 5/8 inch for ease of hook-up.
Check Stock

Car Engine Heater Pad, 4 x 5 inch Car Universal Engine Heating Oil Pan Heater Pad 120V Silicone Electric Battery Heater Pad 150W Engine Block Heater Pad w/Overheat Protector 68\ Long Power Cord

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

Mr Gasket 7872 Fuel Pump Safety Switch

  • Designed to ensure that the electric pump does not work unless the engine has oil pressure.
  • Crafted from high quality material for long lasting durability.
  • Prevents the pump from running in a situation where the motor may stall with the ignition on.
  • Continues to provide power to the pump as long as there is oil pressure to keep the switch turned on.
  • Installed with the pressure sending unit using a T fitting into the block.
Check Stock