Reviews Engine Oil Pump Tube Seal

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock

DRIVESTAR M340 Engine Oil Pump 2004-2008 for Ford F-150/Expedition/Explorer/Mustang,for Lincoln Navigator/Mark LT 5.4L 4.6L

  • Fitment:Oil Pump for Ford 2005-2014 Expedition,2006-2010 Explorer,2007-2010 Explorer Sport Trac,2004-2010 F-150,2005-2010 F-250 F-350 Super Duty,2005-2010 Mustang,for Lincoln 2006-2008 Mark LT,2005-2014 Navigator,for Mercury 2006-2010 Mountaineer.
  • Replace Oil Pump Number:M340,2244-3663,9L3Z-6600-A,3L3Z6600AA oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

DRIVESTAR M295HV High Volume Engine Oil Pump for Chevrolet Silverado 1500/ Express 1500,4.8L 6.0L

  • Fitment - Oil Pump for Chevy/GMC.More detailed information please check Part Finder.Thanks.
  • Deliver Oil - The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Please Note – When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

4000PSI Pressure Washer Pump Horizontal Shaft 1\ For EB4040HA With Honda Engine

  • 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3300 PSI and fit most 208-220cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
  • 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
Check Stock

DRIVESTAR M365 Engine Oil Pump for Chevy(GMC) Silverado 1500/Suburban 1500/Tahoe,for Cadillac CTS/Escalade ESV 5.3L 6.0L 6.3L

  • Fitment - Oil Pump for Chevy,for GMC.More information Please check Part Finder,Thanks..
  • Replace Oil Pump Number - 12612289, M365, EP365, OP3172, 224-43669, 601-8057, EPK137, PO26-M365, EM-365, 601-2121.
  • Deliver Oil - The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Please Note – When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

LYCARESUN 15 to 55 Gallon Drum Pump, Aluminum Barrel Pump Hand Liquid Transfer, Hand Siphon Barrel Pump, Hand Drum Pump for Gasoline Oil Fuel Diesel, Kerosene, Hydraulic Fluid

  • Adjustable Drum Pump: It consists of 3 segmented suction tubes, the total height of the pump is 51 inch, easy to adjust the length of suction tube according to your need. The outlet pipe can be adjusted to fit 15 to 55 gallon drums..
  • Quality Assurance: Our roller pump is made of high-quality aluminum materials, with high anti-corrosion and rust prevention capabilities, and is durable. Each set has been tested before reaching the sales standard..
  • Filter: Each drum pump set is equipped with a filter. Just install it at the bottom of the oil suction pipe to effectively purify the oil and filter out impurities..
  • Good Sealing Performance: The oil suction pipe is threaded, not easy to wear, with high hardness, good connection performance, strong sealing, and effective prevention of oil leakage..
  • Scope of Application: Liquids that cannot be extracted: acid-base liquids, corrosive liquids, gasoline, water, urea, chemical solutions, edible liquids, etc. Extractable liquids: engine oil, hydraulic oil, gear oil, diesel oil, kerosene, edible oil (but not edible grade)..
Check Stock

Ford Dipstick/Tube/Engine Oil Dipstick Tube Seal

  • Dipstick/Tube/Engine Oil Dipstick Tube Seal Part Number 3C3Z6753AA.
Check Stock

AAA 90037 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3700 PSI, 2.5 GPM, 3/4\ Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • ⭐【Reborn Your Power Washer】YAMATIC Vertical Pressure Washer Pump 7/8" Shaft MAX 3100 PSI / 2.5 GPM, Save money by replacing your pump instead of buying a new pressure washer. Top performance at 2900-3100 PSI and fit most Rear Outlet 160-196cc at 6.5-7hp engine RYOBI, Honda, Briggs and Stratton, Subaru, PowerStroke, Craftsman, Simpson, Homelite and Many other brand..
  • ⭐【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. The fully anodized treatment for rust prevention, improve wear resistance and hardness of Pressure Washer Pump..
  • ⭐【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3100 PSI at 2.5GPM to wash walls, fences, sidewalks, vehicles, and more. ⚠ This pump also fit for the front inlet/outlet engine, but you need to rotate the pump 180 degree and drill holes in the frame to install the pump. If this is difficult for you, please choose a front inlet/outlet pump directly..
Check Stock