Reviews Engine Oil Pump Screen Tube

LUMAX LX-1336 Red Plastic Bucket Pump with Flex Hose and Non-Drip Nozzle. 5-6.5 Gallon (20-25 L) Capacity. Self-Priming, Push-Down Action Pump. Discharge Capacity: 3 Fluid Ounces per Stroke.

  • Push-down action pump that fits 5 gallon pails.
  • Precision buna-n seal that eliminates by-pass.
  • 50 inches flex hose has non-drip nouncezle.
  • 3 fluid ounce per strokeDescriptionThe plastic bucket pump with flex hose and non-drip nozzle is a plastic bucket pump with zinc-plated steel tube for transferring non-corrosive fluids of light to medium viscosity like, engine oil, gear oils, transmission fluid, automotive additives, machine oil, etc. It is a self priming, push-down action pump that fits 5 gallon pails, has a drain-back nozzle that prevents spills and accidents, a precision buna-n seal that eliminates by-pass, a nylon piston for durability, and a zinc plated, corrosion-resistant suction tube. It includes a 50 inches oil-resistant flex hose with non-drip nozzle, has a 1 inches inlet port, and a 1/4 inches outlet port. The discharge capacity is 3 ounce per stroke..
Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

  • ...p has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • 【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for storage or transportation of fuel or other liquids.Do not pump different oils into the same tank. Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running..
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

Genuine TERA PUMP 33.5-49" IBC Totes Plug-in Electric Drum Barrel Pump with Flow Meter and Telescopic Tube for DEF/Diesel/Kerosene/Antifreeze/Agricultural Chemicals

  • Electric 12V power drum pump with flow meter and telescopic suction tube.
  • Flow Meter measures flow rate of liquid running through our pump.
  • Application: Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Flow Rate: 7.1 Gallon per Minute or 26 Liters per Minute.
  • Attention: Pump is NOT Compatible with Acids, Alkalis, Corrosive media, Solvents, Acetone, Lacquer, Mineral Oils, Solvents, Turpentine, Heavy Oil or Drinking Water.
Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters

  • ◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
  • ◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
  • ◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
  • ◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
  • ◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock