Reviews Engine Oil Flush 2

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly..
  • Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution..
  • High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
Check Stock

Silicone Heating Pad, 2 x 5inch Car Universal Oil Pan Heater 50W Battery Heater Pad 120V Engine Block Heater Pad with 68Inch Long Power Cord

  • Heating Technique: In the cold winter, use our 120V 50W silicone heating pad to turn on the power before starting the engine, and continue to evenly heat the metal surface to make the oil reach the perfect temperature.
  • Improve Engine Oil Flow: Continue to transfer heat to reduce the consistency of the oil, keep the engine oil as a thin liquid, help you better lubricate the engine, reduce wear, and extend the service life of the engine and gearbox.
  • High-Quality Material: Our oil pan heater is made of wear-resistant silicone, waterproof, oil-proof, and low-temperature resistant, the entire surface is heated evenly, strong adhesive makes it fixed on the metal surface. Please note: it is very hot after heating, please use a thermostat (not included) to adjust the temperature.
  • Simple Operation: Clean the metal surface, tear off the backing of the engine heating pad and stick it firmly to the outside of the oil pan or other metal surface, insert the 2-core power cord into the socket, and the heating starts immediately, after 10-15 minutes, unplug the power cord and start the vehicle to resume normal operation.
  • Adaptability: The size of the engine block heater is 2 in x 5 in, and the power cord is about 68 inches. It is only suitable for automotive parts with m....
Check Stock

COMPLETE & UNABRIDGED 1984 CORVETTE FACTORY REPAIR SHOP & SERVICE MANUAL - INCLUDES; 1984 Hatchback, '84 Convertible,

  • 【Warm Up Your Engine Quickly】In cold winters, use Silicone Heater Pad for 10-15 minutes to ensure your engine and transmission fluid circulates efficiently before starting. For those cold mornings, the device quickly heats the oil to the right temperature..
  • 【Improve Oil Flow】You will get 2 Car Engine Heater Pad. When plugged in, Engine Warmer will transfer heat to keep engine oil a thin fluid, giving you instant lubrication when you start the engine, this reduces wear and extends the life of the engine & transmission..
  • 【Thermostatic Control】Car Battery Heater Pad rated power 120 volts, 150 watts, built-in automatic thermal protector keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
Check Stock

Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System

  • Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm（17.32inches） (inclusive) transom height.
  • two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
  • 2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
  • Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
  • The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adop....
Check Stock

HURRICANE Fork-Up Mount Adapter Envy Road 12x100mm T-A Fork - HU4769

  • 2-stroke 50cc or 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach....
  • Fits most 26" or 28' wheeled bikes with standard V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the....
  • Key parameters: Rated Power:1.15Kw~2.5kw/5000r/min.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 32: 1 after....
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to....
Check Stock