Reviews Engine Harmonic Balancer Repair Kit

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

SEEBOO LS Harmonic Balancer Installation Tool Crank Pulley Install Tool Compatible with GM 1997-UP V8 LS1 LS2 LS3 LS4 LSX LSA LS6 LQ4 LQ9 with Thrust Bearing & Wrench Flats

  • 【HIGH PERFORMANCE】—The Crank Strength Of The Harmonic Balancer Installation Tool Is 12.9, And It Is Made Of High-Quality 35CrMo Heavy Steel. The Quenching Process Is Modulated To Ensure That It Does Not Affect Long-Term Use. The Surface Is Black And Rust-Proof. There is No Need To Worry About The Wrench Slipping Off During The Installation Process With Customized Flange Nuts!.
  • 【COMPATIBLE WITH CHEVROLET GM LS & LT SERIES 】—Harmonic Balancer Installation Tool Suitable For Camaro, Corvette, Trans Am, GTO, G8, LS Truck Or LS Power Road Signs. Compatible With All GM LS And LT Series Engines From 1997 To The Present (Third, Fourth And Fifth Generations). You Can Also Search For Matching Models Through Amazon To Purchase!.
  • 【 INSTALLATION AND REMOVAL 】— Can Be Screwed Completely Into The Crank, Just Slowly Twist The Nut Until The Pulley Is In Place. The Upgraded Wrench Plane Is Convenient For Disassembly Without Worry，This Is Required For Engine Replacement Or Balancer Upgrades. A Little Lubricating Oil Will Make It Smoother When Using!.
  • 【 PACKAGE INCLUDES ​】— 1*Stud, 2*Washer, 1*Thrust Bearing, 1*F....
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

NEW 55-57 CHEVY FRONT ENGINE MOUNT KIT WITH BRACKETS FOR SBC V-8 ENGINES, BLACK POWDER COATED, INCLUDES SHAFTS & RUBBERS, 1955 1956 1957 TRI-5 150 210 BEL AIR DELRAY NOMAD SEDAN, SMALL BLOCK CHEVY

  • ... front engine mounting brackets, that includes everything pictured.
  • Note: These engine mounting brackets will only bolt on the early Chevy Engine Blocks that have the 4 bolt holes tapped 3/8"-16 in the front > These tapped holes are located in the cast bosses, that are either side of the timing cover, just above the harmonic balancer > It is possible to tap these holes on the blocks that are not threaded, but requires a skilled installer.
  • Factory Applications: | Fits Small Block Chevy V-8 Engines for the applications listed below: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1955-1957 Chevy Delray > 1955-1957 Nomad > 1955-1957 Sedan Delivery.
Check Stock

Lisle 54810 Master Harmonic Balancer Puller Kit

  • The kit Includes a standard Harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge.
  • Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi.
Check Stock

Orion Motor Tech Harmonic Balancer Puller Kit, Power Steering Pulley Puller Installer Tool Set, Automotive Steering Wheel Puller Tool Kit, Flange Type Gear and Crank Puller Set

  • GEAR PULLER SET: This Orion Motor Tech tool kit removes universal harmonic balancers, gear pulleys, steering wheels, crankshaft pulleys, and more for easy automotive repair and maintenance.
  • COMPLETE 49-PIECE SET: This gear puller kit includes a steel yoke, a pressure screw, 3 adaptors, and 30 bolts in the most needful SAE and metric sizes—1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, M8x1.25, and M10x1.5—to suit your different needs.
  • the 4-slot yoke also allows you to use it for two or three-slot operation with ease.
  • DURABLE PERFORMANCE: Each of these crank puller tools is constructed from hardened 45# steel while the centering adaptors are further heat-treated and anodized for the necessary strength to get your work done right.
  • all metric bolts are blackened and all SAE bolts are chrome-plated for easy identification, offering you years of outstanding dependability and superior corrosion-resistant service.
  • SCRATCH-FREE OPERATION: Thanks to the well-designed yoke, pressure screw, and washers, pressure is evenly distributed to pulleys for safe and worry-free servicing.
  • WIDE COMPATIBILITY: Including stepped bolts for 1990 and newer GM 3300-3800 V6 crankshaft pulleys, this harmonic balancer tool kit works on most cars, pickups, and SUVs in the market.
Check Stock

ATPEAM 46pcs Harmonic Balancer Puller Set | Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Extra Last: The Steering Wheel Puller Kit is made of heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • Mutiple Use: The harmonic balancer puller includes 30 different bolts&a four yoke slot, allowing unit to be used with harmonic balancer, Flywheel, Crankshaft, Steering Wheel ,Pulley and other two or three-hole applications..
  • Various Bolt Sizes Added: 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • Wide Compatibility: The ATPEAM crankshaft pulley puller features a steel yoke with four slots enabling use on nearly any vehicle configuration..
  • The Wheel Balancer Gear Puller Set Includes: (1) 5 inch long 3/4-inch pressure screw, (30) bolts, (1) steel yoke, (2) centering adapters, (1) flat shaft adapter, (11) different sized washers, and (1) carrying case for your convenience.
Check Stock

77080 Harmonic Balancer Socket Tool 19mm Fits for Honda Use with 1/2 drive & 50mm Crank Pulley Wrench Holder Crankshaft Pulley Removal Tool Fits for Honda Acura

  • 【Application】19mm Harmonic Balancer Socket used in conjunction with a 1/2-inch drive for Honda engines using 19mm hexagonal pulley damping bolts....
  • 【Function】19mm Harmonic Balancer Socket is suitable for removing the lug nuts from the tightening wheel. 50mm Crankshaft Crank Pulley Wrench....
  • 【Advantages】19mm Harmonic Balancer Socket has thicker walls reduce bending and vibration to provide maximum torque. 50mm Crankshaft Crank Pulley....
  • 【Superior Material】Made of sturdy, heavy-duty steel with black coating, anti-corrosion for professional level reliability and durability. Ensure....
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products,....
Check Stock

OCPTY OCPTY Harmonic Balancer Crankshaft Belt Drive Pulley Fit For 2005-2007 2010 for Scion tC 2008-2015 for Scion xB 2009-2013 for Toyota Matrix 2001-2008 for Toyota RAV4 2002-2008 for Toyota Solara

  • COMPATIBLE MODELS - Fit 2007 2008 2009 2010 2011 2012 2013 Nissan Altima, 2007 2008 2009 2010 2011 2012 Nissan Sentra.
  • PART NUMBERS - Replace for 1340700H010 1347028020 134700H010 594-198 number crankshaft pulley harmonic balancer.
  • PRODUCT DETAILS - The crankshaft pulley is one of the key functional components on the gasoline engine, which is installed on the front end of the crankshaft and rotates with the crankshaft. It is to drive the power source of other engine accessories, relying on the transmission belt to drive generators, pumps, booster pumps, compressors and other operations.
  • REPLACE ADVANTAGES - Manufactured to OE design ensuring each balancer will install properly and function as intended.Dynamically balanced for proper absorption of the crankshaft vibrations.
  • PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer.
Check Stock