6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglect,even a new cooler can become restricted by contaminants quite quickly..
  • Package Includes 1x Flush adapter and 1x aluminum anodized adapter.Feel free to contract us if you meet any problem with the product. We'll reply you within 24 hours..
Check Stock

BlueDevil Pour-N-Go Head Gasket Sealer - 16 Ounce 00209 by BlueDevil Products

  • Permanent Coolant Leak Repair - Just Shake, Pour And Go.
  • Fixes Cracks And Leaks In Radiator, Head Gasket, Freeze Plugs, Cylinder Heads, Heater Core, Water Pump Casing And Engine Blocks.
Check Stock

RYANSTAR Universal car Radiator Coolant Tank 800ml Coolant Expansion Tank Overflow Oil Catch Tank Cooling Catch Bottle Reservoir Aluminum Billet Black

  • 【6061 Aluminum】Expansion tank made of 6061 aluminum for enhanced strength, anodized polished and durable, better than plastic material..
  • 【Prevent Coolant Leakage】Tight closed cap, Fully Tig Welded and Thread Come with O-ring Gasket, Keep a good closed environment and Prevent coolant leakage..
  • 【Prevent Rust】The radiator coolant overflow tank is fairly simple device but it can save you a lot of money by preventing rust formation in the cooling system of your car..
  • 【Keep Operational Temperatures】Radiator coolant overflow tank makes the engine coolant to keep it within the operational temperatures when the engine is running at its optimum performance..
  • 【Coolant Back Into Radiator】When coolant will start to cool down, it will contract in volume, a vacuum valve in the pressure cap opens allowing the coolant which was flown into the radiator coolant overflow tank back into the radiator..
Check Stock

K-Seal ST5501 Multi Purpose One Step Permanent Coolant Leak Repair, Blue

  • Permanent Coolant Leak Repair - Just Shake, Pour And Go.
  • Fixes Cracks And Leaks In Radiator, Head Gasket, Freeze Plugs, Cylinder Heads, Heater Core, Water Pump Casing And Engine Blocks.
Check Stock

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

Dike Radiator Stop Leak - 1 Pint

  • Stops Leaks In Radiators In Seconds Helps Gaskets.
  • Works With All Standard And Permanent Antifreezes.
  • Preventing Antifreeze And Water From Seeping Into The Engine.
  • Will Not Block Small Passages In The Cooling System.
  • Keep Dike In Your Vehicle Emergency Kit For On-The-Spot Repairs Or As a Preventative Measure For Vehicles Operating Under Severe Conditions. Add One Pint To Every Four Gallons Of Coolant Or Water..
  • WHAT'S INCLUDED: (1) Pint of Dike Radiator Stop Leak.
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Genuine OEM Engine Coolant Thermostat Kit For BMW E60 E61 E82 E83 E85 E86 E88 E89 E90 E91 E92 E93 F30 1 3 5 X Z Series 3.0L L6

  • Fit for: BMW E46 E39 E36 E85 Z3 Z4 320i 323i 325i 328i 330i 525i 528i 530i. More detailed compatibilities please see Product Description..
  • A leaking heater pipe line is not only aA coolant pipe is a hard plastic line used to transport coolant between cooling system components. It is usually attached on both ends by coolant hoses, and the coolant pipe can, in some cases, act as a junction to split coolant to other parts. Often, a coolant pipe may be connected between the radiator and water pump, or between the water pump and the heater core..
  • A leaking heater pipe line is not only a waste of engine heat but also a cause of engine damage. Together with the heater hoses, this pipe line is where heated coolant passes through to eventually warm your cabin during winter months. If this pipe or tube is damaged, your coolant level will deplete quickly, thus resulting to heater malfunction and a steaming engine..
  • Please be sure to compare carefully with Pictures or OE number before buying items. If you are not sure this part is compatib....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock