Reviews Ender 3 Pro Glass Bed

Official Creality Ender 3 V2 Neo 3D Printer with CR Touch Auto Leveling Kit PC Spring Steel Platform Full-Metal Extruder 95% Pre-Installed 3D Printers with Resume Printing and Model Preview Function

1.Easy Assembly: Compared to Ender-3 V2, this Ender-3 V2 Neo printer is pre-installed, and the assembly requires only 3 steps. Friendly enough to....
2.CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you in the trouble of manual leveling. Easy to use,....
3.Brand New 4.3 Inch UI User Interface: The upgraded UI adds a model preview function, making it easier to observe the printing shape and progress for....
4.PC spring steel magnetic build plate: Different from ender 3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC....
5.Silent Motherboard: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainboard. This Ender-3 V2 Neo....

Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..

Check Stock

5PCS Creality 3D Printer NTC Thermistor 100K NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Voxelab Aquila XH2.54-2P Connector 1m/39.4inch

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors..
Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying..
After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours..

Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.

Check Stock

Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5/Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

【Widely Application】: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7....
【Easy Firmware Installation】: Simply download the BLTouch firmware（Note:words "without adapter"firmware) from the Creality Official Website and....
【Easy to Install and Use】3 kinds of Different mounting brackets allows for installation on several of our printers..
【High-precision】Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy..
【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to....

Check Stock

3D Printing Magnetic Plate Dual Sided Flex Steel Bed 235x235mm with PEI+Magnetic Surface Printing Hotbed Parts for Ender 3 Aquila Kobra Neptune 2 Ender 3 S1 Ender 3 V2

Size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3/Kobra, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments..
Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand..
Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable..
Note - If you have any question or need technical support about the product, Please press &quo....

Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
Precise Detection: Blue LED indicates normal filament feed-in.
Blue LED turns off when filament runs out..
IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).

Check Stock

PEI Magnetic Flexible Frosted Surface Heated Bed 235x235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Pro X/Ender 5/Ender 5 Pro 3D Printer

Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Flexible, removable, and can stick to magnetics very well. High strength and heat resistance..
The flexible surface can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety..
Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off..
When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print..
Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro.Compatible with PLA/PETG/PEEK/ABS and any other filaments..

Check Stock

Official Creality Ender 3 S1 Pro Direct Drive FDM 3D Printers with Auto Leveling Bed 300℃ high Temperature hotend Filament Sensor Spring Steel PEI Magnetic Build Plate Printing Size 220x220x270mm

【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder....
【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling....
【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power....
【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dual-motor design, Ender 3S1 Pro works smoother and more....
【After Sale Worry-Free】Creality 3D printers are provided lifetime technical assistance and 12-months hardware warranty. Whenever or why, when....

Check Stock