Rockville DK512 PACKAGE Dual 12' 2800w K5 Car Subwoofer Enclosure+DB12 Amplifier

  • Loaded Sub Enclosure Features: Final Impedance: 2 Ohm, Peak Power Handling: 2800 Watts, CEA-2031 Compliant RMS Power Handling: 700 Watts, ¾” MDF enclosure, Bonded stapled and braced, Computer designed vents, Angled at 15 % for perfect bass alignment.
  • 2″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire, The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire, 50 Oz High Quality Magnet.
  • Amplifier Features: Rockville dB12 2000 Watt/500w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp, CEA Compliant Power Ratings (Rated at less than 1 % distortion).
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.), – 2 Ohm: 1000 Watts x 1 Channel, – 4 Ohm: 600 Watts x 1 Channel.
  • Amp kit features: 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables, 17’ – 18 Gauge Blue Remote Cable, 17’ – 16 Gauge Clear Speaker Wire, 3’ – 4 Gauge Clear SuperFlex Ground Wire.
Check Stock

Wall Mounted Copper Ground Bar 16 Terminal Positions .25\ x 2\ x 10\ Ground Bus Bar Kit,SM40 Insulators Rated Uimp

  • .25" (1/4") x 2" x 10" Copper Ground Bar with 1/4''* 16 Terminal Positions..
  • This is a high conductive copper ground bar set, including one copper plate, two SM40 polyester standoff Insulators, two stainless steel brackets, 16 sets stainless steel washer& bolts ..
  • SM40 polyesters made from UL material - QMFZ2.E252110,Rated Uimp up to 6kV ..
  • Wall mounted copper ground bar kit enables multiple ground points to be connected quickly and easily. Comes pre-assembled with brackets and insulators attached for quick installation. Widely used in high low power distribution cabinet,equipment grounding connections,For power distribution, transmission, fixing copper or copper busbar, etc..
  • 100% after-sales guarantee. If you have any problems within 30 days of receiving the goods, you can enjoy the unconditional return refund service..
Check Stock

NIPPON TUBO8 8 Subwoofer Tube Box w/Charcoal Carpet Covering

  • SUBWOOFER: The subwoofer can fit into any space and features butyl rubber surrond, built in amplifier, vented enclosure design and comes with mounting....
  • SUBWOOFER DESIGN: The Butyl rubber surround increases subwoofer durability. The vented design also increases bass output.
  • SUBWOOFER RECOMENNDATION: 8 gauge power and ground wiring is recommended.
  • AMPLIFIER INSTALLATION KIT: 20 ft. 8 Gauge Red power cable, Competition high quality fuse holder, 1/4" Gold plated ring terminal, 3 ft., 8 Gauge Black....
Check Stock

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

  • ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
  • LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
  • LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....
Check Stock

Koutemie 2 Tiers Small Firewood Log Storage Rack Holder for Indoor Fireplace or Outdoor Patio, Black

  • 003cb003eWARM TIPS FOR WASHER- 003c/b003e The outside fire wood stacker bracket uses 2-in-1 round nut with washer to ensure its stability, no other extra washer need. Warm tips, be sure to tighten each screw again before use, and put on hard & flat ground to make sure the firelog is more stable..
  • 003cb003eHEAVY DUTY MATERIAL & SOLID- 003c/b003e Our outdoors fire log holder is made of 1 inch in diameter heavy duty steel pipe with powder coated finish, durable, water-proof, rust proof and well fit for inside and outside long-lasting use. And the stove lumber stacking holder is strong enough to withstand a load of up to 200 pounds without worrying about the brace bending..
  • 003cb003e2 LAYER SHELVES & 4 TOOL HOOKS- 003c/b003e This freestanding lumber stacker stand with 2 tiers is good ideal for kindling or woods. The slab design of the bottom can keep woodpile rack system residue & mess from dropping to ground. This space saving Iron wood pile rack containers with 4 fireside tool holders for hanging all fire place accessories sets, fire poker kit, shovel, broom, tongs or fireplace bellows..
  • 003cb003eSMALL SIZE & EASY TO MOVE- 003c/b003e This metal firewood holder frame measures 16 x 13 x 32 inches (W x D x H), easy to assemble and use. Overall, the log bin o....
Check Stock

Windshield Washer Reservoir Kit Universal Windshield Washer Bottle 12V Washer Pump Fluid Reservoir Sprayer Kit Car Windshield Washer Pump Jet Button Switch 160186 Reservoir Tank Kit by BOOTOP

  • Universal Car Windshield Washer Pump Washer Fluid Reservoir Bottle Kit with Pump Jet Button Switch, 12V Windshield Tank compatible with Polaris RZR....
  • Windshield washer kit, universal car windshield washer pump, Capacity: Compact 1.4LTR bottle with mounting bracket. Voltage: Universal 12V pump that....
  • Universal Windshield Washer Kit, High practicality: Practical tool for cleaning your car windshield, efficient and fast. The bottle will not rupture....
  • 12V Washer Pump Fluid Reservoir Sprayer Kit may also know as Universal Windshield Washer Bottle, 12V Universal Car Windshield Washer Pump, universal....
  • 180 Days Warranty. Any questions, please feel free to contact us, we will try our best to help you within 24 hours..
Check Stock

LOVHO 4000 psi Commercial Grade Telescoping Spray Wand for Pressure Washers

  • Strong aluminum spray wand for pressure washer reaches tall areas up to 18 ft away..
  • Maximum pressure of 4000 PSI makes jobs like gutter cleaning, pavement cleaning, and roof cleaning easy..
  • 13 degrees extension wand makes hard to reach places like roof corners easy to clean. Inlet 3/8" QC and M22-14mm male adapter..
  • Aluminum makes this wand sturdy yet lightweight, Easy to assemble and disassemble .the 5 sections.
  • This 18 ft wand makes jobs easy to perform from the ground, especially with its ergonomic grip,Wand comes with a belt kit for control and to help with fatigue for long term usage.The belt can save your physical strength when you handle the pressure washer wand. According to customer's suggestion, we have improved the belt , Thanks for customer's advise, we can make our products more perfect!.
Check Stock

Wall Mounted .125\ x 2\ x 6\ Copper Ground Bar Kit - Kit Includes Electrical Grease and 14 Bolts - TG18206RK

  • Provide the common grounding point within the Rack, Enclosure, or Cabinet.
  • Engineered to comply with US and International grounding requirements.
  • Kit includes: Ground Bar, 4 foot grounding cable with lug and ring leads, 2 mounting screws.
Check Stock