Reviews Emt Conduit Straps

Gardner Bender B1000 Portable Cyclone Conduit Bender

Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
Attaches to almost any pipe threader to use as a bending power source.
Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
1 shoe for all sizes – no spare parts to carry around.

Pliers tighten 1/2-Inch (13 mm) and 3/4-Inch (19 mm) EMT or 1/2-Inch (13 mm) rigid locknuts.
Reams and smoothes both inside and outside of conduit.
Knurled jaws at nose tip pull wire or fish tape and machined nose fits snugly into locknut wings.
Forged in the USA with custom, US-made tool steel for maximum durability.

MEASURE OR SET ANGLES, check relative angles, or can be used as a digital level.
REVERSE CONTRAST DISPLAY improves visibility.
MAGNETIC BASE attaches to conduit, pipes, saw blades and other ferromagnetic surfaces.
V-GROOVE EDGES enable optimal alignment on conduit and pipes.
DIGITAL LEVEL MEASURES 0-90 Degree or 0-180 Degree ranges.
PLUMBER'S KIT straps to non-magnetic pipes and conduit to present a magnetic surface.
FLEXIBLE, ADJUSTABLE LENGTH STRAPS connect the metal plate to pipes, conduit, or other objects.

Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
Attaches to almost any pipe threader to use as a bending power source.
Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.

Terminates 1/2-in EMT conduit to a 1/2-in knockout in an outlet box or enclosure.
Concrete-tight when taped and for dry location applications.

EMT & IMC CONDUIT with a SINGLE SHOE. BENDS in both HORIZONTAL & VERTICAL positions. Hook attachement on dial FREES HANDS WHILE WORKING WITH CONDUIT..
EASY DIAL settings and CAST-IN-PLACE DEGREE MARKS CREATE ACCURATE BENDS every time. Quickly CREATES REPEATED BENDS at the same degree..
CONSTRUCTED OF RUGGED MALLEABLE IRON for strength and durability.
and with STRONG LEGS to offer increased jobsite durability (10x life test). Large tires/wheels - increase mobility..
LIFT HOOK FOR SECURITY (job-site) tethering and EASILY LIFT & TRANSPORT using the forklift tubes built into base.
WEATHER RESISTANT COVER is included. Incorporates STORAGE AREA FOR TOOLS while in use. RESETTING CIRCUIT BREAKER ELIMINATES DOWN TIME changing fuses.

TEAR AWAY DESIGN FOR QUICK RESPONSE: Tactical IFAK Pouch comes with Hook-N-Loop back panel allow you to tear away and take out for rapid deployment. Then two ways zipper to fully opened for accessing the EMT supplies easily once emergencies happen. These are basic required for a REAL first aid kit..
3 BACK STRAPS FOR DIFFERENT USAGE: Molle EMT Pouch's back panel has a buckle strap to hang onto car pillows or cross bar. Two Molle back straps is also compatible with PALS/Molle System like the Plate Carrier, Military Backpack, Car Molle Panel and Chest Rig, etc..
SPECIAL INTERNAL ELASTC STRAPS: Tactical First Aid Pouch has interlaced inner elastic straps, just free your imagination to store various little gears on the criss-crossed elastic bands, the opposite side also has two rows of elastic straps for larger device or gadgets..
MULTIFUNCTIONAL FRONT FACE: Molle Admin Pouch equip the Laser-Cut PALS/Molle system to add pouches and gears. The hook & loop panel also lets you show off morale patches as desired. Patch is free included. Size: 7.3"W * 4.1"H * 2"W / 18.5 x 10.5 x 5cm..
MATERIAL AND SIZE: Molle EMT Pouch is adopted imitation leather to replace the polyester fabric to enhance the toughness. 600D Nylon fabric is waterproof and durable enough for outd....

Very durable 8 in. 42-teeth saw blade used for cutting metals (steel studs, angle iron, flat bar, channel, EMT conduit, all-thread). Max RPM of 9000..
Cermet and carbide blend teeth cut metals.
lasts 3x longer than a standard carbide blade.
Laser-cut stabilizer vents trap noise and vibration.
Triple chip metal cutting grind provides durability and burr-free cuts.
Spark free blades are "hot work" compliant (may not need to obtain a hot work permit on jobsites depending on local laws).

This is a CIRCOPACK value bundle comprising 20 pieces of Circo Innovations’ Light Grip Snap Clamp ABS–4 inch X ½ inch. Please refer to the images on sizing. Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
These Snap Clamps are compatible with many types of pipes, including PVC & EMT (metal conduit). Some applications include greenhouses, row covers, shelters, bird protection, dog beds, and quilting frames..
The Snap Clamps can be used to attach tarps or netting to pipe. These have higher temperature resistance and gripping strength compared to the original clamps design..