Reviews Elegoo Mars 3 Dlp

ELEGOO 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Clear Red 500g

  • Low Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish..
  • Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing..
  • Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork..
  • Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers..
  • Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong.
Check Stock

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

  • Wide Application: Suitable for all desktop LCD 3D Printer that prints size no more than 200x140mm(L*W), such as ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon Mono SE, Photon S, Phrozen Sonic Mini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
  • High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
  • High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..
Check Stock

ELEGOO Water Washable 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing 500Gram Clear Blue

  • Low Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish..
  • Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing..
  • Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork..
  • Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers..
  • Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong.
Check Stock

Sovol 3D 2 Pack Stick On Gasket for 5.5' & 6.1' 3D Resin Printers, Universal Protection from Resin Spill, Fits for Mars Series ANYCUBIC Photon QIDI Tech 5.5s - Resin Resistant

  • ...he FEP film from creating suction and pulling on the LCD, which can dislodge it while attempting to remove the vat. *THIS LISTING IS FOR THE GASKETS ONLY. IT IS NOT A SCREEN PROTECTOR..
  • [Suitable for both 5.5" & 6" resin printer] – Works on multiple 5.5 inch or 6.1 inch LCD resin printers. Compatible with EPAX X1, Elegoo Mars/Mars Pro/Mars C/Mars 2/Mars 2 pro, Anycubic Photon/Photon-S, Prusa LD-002R, QIDI Tech Shadow 5.5 (NOT 6.0) & Longer Orange 30 UV Resin Printers. Please note: You must re-level your build plate per the instructions included after installation..
  • [Extra durable] - Made of high-quality polypropylene, our gasket is built to last. It is resin-proof and safe from tears and abrasion, while remaining very flexible..
  • [Save your prep time] - Two-piece backing ensures easy installation. Now you're no longer forced to tidy up your printer right after a print. With our stick on gasket, you will have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks..
  • [High light transmittance] - It would not affect the performance of LCD screen. Any questions or issues about sovol products please feel free to contact us..
Check Stock

ELEGOO 6.08 Inches Monochrome 2K LCD Compatible with ELEGOO Mars 2 and ELEGOO Mars 2 Pro Resin 3D Printers with 1620x2560 Resolution Active Area 3.25 x 5.14 inches

  • Original Monochrome 2K LCD screen used on ELEGOO Mars 2 and Mars 2 Pro resin 3D printer.
  • 6 inches LCD with 1620x2560 high resolution ensures your printing with high precision.
  • Four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency,....
  • Assembly of the 2K LCD screen is straightforward and easy. (See tutorial video links in the description below).
  • The 2K LCD screen kit is well-protected with anti-static PE foam package in the box.
Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

  • HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
  • WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
  • HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
  • HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
  • STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..
Check Stock

ELEGOO 5PCs FEP Release Film Mars LCD 3D Printer 140x200 MM 0.15mm Thickness

  • Compatible with ELEGOO MARS LCD 3D printer.
  • 200*140 MM and with the thickness of 0.15 mm.
  • 95% light transmittance which ensures high stability of UV lightning.
  • Heat resistant and durable quality for long term usage.
  • Comes with an easy-to-follow tutorial on the package guiding you to replace the FEP film. Please remove the double-sided protective film before use..
Check Stock

Digital Modelmaking Laser Cutting 3D Printing and Reverse Engineering

  • CASTING IN MIND: Tested & developed by jeweler industry, dental labs, engineers and hobbyists across the world.
  • They are designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. You can use it to....
  • More important features: Less than 0.05% residual ash after burnout.
  • Optimized for 25µm - 50µm layers, but can be adjusted by exposure.
  • HIGH PRECISION and FAST CURING: Specially formulated to minimize reducing volume shrinkage during the photo curing process, it ensures the high....
  • Wide Compatibility: Support LCD405 DLP 395 to 405nm UV 3D printers and completely compatible with ANYCUBIC, ELEGOO, EPAX and Phrozen Shuffle XL,....
Check Stock

FULAMENT Fula-Flex Resin Sheet for 3D Printing - 150mm x 95mm - Flexible Stainless Steel Printer Build Plate

  • [ EASY TO INSTALL ] - Fulament’s resin build plate is very easy to install and use! Simply align the magnetic sticker, remove the paper backing from....
  • [ EASY TO REMOVE PRINTS ] - Keeping our customers’ needs in mind, we built a 3D printer build plate that increases printing success. Our 3D printing....
  • [ WHY FULAMENT ] - Unlike other resin flex plates who use spring steel, we use a spring tempered magnetic grade of Stainless Steel. Ensuring that the....
  • [ COMPATIBILITY ] - This 150mm x 95mm resin plate fits Elegoo Mars 3.
  • [ FULAMENT'S PROMISE ] - Fulament is a USA-based company. Our products are made by enthusiasts for enthusiasts. We know you'll love our 3D printer bed....
Check Stock