Reviews Electronic Thermal Relay

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

• Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
• output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
• Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
• material : metal, plastic, electronic parts.

Automotive Heating and Air Conditioning (Pearson Automotive Series)

• Price For: Each Item: Hard Start Kit Application: For Use on Residential and Commercial Air Conditioning Units, Heat Pumps and Room Air Conditioners, Provide Additional Starting Torque to all Single Phase 115 thru 288 Volt Units Includes: Lead Wires, Electronic Potential Relay (EPR), 330 V Capacitor Type: Relay and Start Capacitor Voltage: 90-277 HP: 1/2 to 10 Increased Torque (Oz.-In.): 300.
• Country of Origin (subject to change): China.

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

• The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
• 1 analog input(3.2V max input). Micro USB connection.
• WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
• 5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
• 40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
• The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..

AUTOVIC Starter Solenoid Repair Kits

• ☞Fitment: For 4-Stroke GY6 Engine 50cc 70 cc 90cc 110 cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster.
• ☞Material: Made of high quality copper and rubber material, efficient and durable.
• ☞Function: Solenoid starter relay is used for electronic applications to turn on / off most device, reduce startup switch electric current.
• ☞Great replacement: Reliable replacement electrical parts, direct plug-in, perfect replacement.
• ☞Package Included: 1pc solenoid relay (Have as a 2 wire 2 pin male connector end).

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

• Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
• output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
• Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
• material : metal, plastic, electronic parts.

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

LLPT Double Sided Thermal Tape Strong Adhesive Multiple 1.2 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC128)

• APPLICATION: LLPT 2-sided thermal adhesive tape meets ASTM D5470 with high coefficient for thermal conduction on electronic components, like controller, semiconductor, MOS, IC, GBT, SSD, computer CPU, GPU, RAM & DDR memory modules and so on.
• easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc..
• MATERIAL: LLPT double sided thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation.
• coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic..
• EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips.
• clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints....

STINGER - 4-Channel100 AMP Solid-State Relay

• One 40A and three 20A outputs, for a combined total of 100A continuous..
• Each output has a thermal overload, and short circuit protection along with LED status indicators for the Thermal/Overload, Active/Inactive status..

Fafeicy 12-Channel DC12-36V PLC Signal Amplifier Board Isolation Relay Module Amplifier Board with NPN Input PNP Output

• Protection function: The relay can effectively avoid system instability caused by mutual interference, effectively protect the output node of the PLC, ensure the normal transmission of the signal, and thereby protect the relay..
• Uses: The relay module can be used to protect the PLC internal relays, which can directly replace traditional relays, reducing maintenance time and cost.
• Stable performance: The signal amplifier is made of high-quality electronic components with stable and reliable performance..
• Easy to install: It is recommended to design to make drilling and module installation more convenient..
• After-sales service: We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..