Reviews Electrolytic Tinplating Steel

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

SHENGHUISS Pair 5 inch 125mm Pull Up Flush Mount Cleat Boat Dock Deck Stainless Steel 316 Retractable Low-Profile Mooring Rope Cleat with Backing Plate and Lock Nuts

  • Pull Up Cleat Size: length of all: 125mm / 5 inch ,weight: 0.75 LB / 340g ,M6 bolt (Please see the left picture for detailed dimensions).
  • Marine dock cleat made of precision cast 316 marine grade stainless steel,.
  • The part of the pull up cleat above the deck is mirror polished, and the part below the deck is electrolytic polished.
  • Flush deck mount Sleek, modern design makes decks look stylish while providing the ultimate in corrosion protection when anchoring or docking..
  • Product includes: 2 pieces of pull up cleat, 2 pieces of backing plate , 4 pieces of lock nuts.（all stainless steel 316).
Check Stock

Chiyuehe Professional Wood Carving Chisel Set - 12 Piece Sharp Woodworking Tools w/Carrying Case - Great for Beginners

  • value:'''Great for beginners - Our wood carving chisel set comes with 12 different shape size, it is a perfect starter gift and all Knives that a....
  • value:'''Premium quality - Our wood carving tools are well made from high quality SK5 carbon steel with electrolytic coating and razor sharp blade,....
  • value:'''Perfect for woodworking - Enough variety of the tips in different 12 sizes-deep gouge, medium gouge, shallow gouge, narrow straight chisel,....
  • value:'''Includes a carrying case- Our 12-piece 8" inch carving chisels includes a carrying case for easy carrying.'''.
  • value:'''Risk-free purchase - 30 days money back guarantee! If you have any question, please feel free to contact us.'.
Check Stock

Toaster Oven Tray and Rack Set,P&P CHEF Stainless Steel Broiler Baking Pan with Cooling Rack, Rectangle 10.5''x8''x1'', Non Toxic & Dishwasher Safe

  • 【STURDY】The toaster oven tray is solid constructed by thick gauge stainless steel, The roasting rack is waved by stainless steel lines, Both parts are rust free and durable for years.
  • 【EASY CLEAN】Mirror finish makes the small baking sheet easily release food, Electrolytic processed SS rack less stick to food, Both parts are easy clean and dishwasher safe.
  • 【HEALTHY】Both the toaster oven pan and wire rack are made of high quality stainless steel without any other materials or toxic teflon coating, Enjoy a healthier cooking time.
  • 【CRAFTED】Smooth rolled edge with no sharp angles, Cooling rack is strongly weaved with parallel lines to prevent food from falling through, bake evenly and come out perfectly.
  • 【SIZE】Baking pan 10.5 x 8 x 1 inch, Rack 9.7 x 7.3 x 0.6 inch, Fits most regular toaster ovens, Perfect to bake or roast such like chicken wings, sausage, bacon, bread, Veggies, and etc..
Check Stock

Fishing Weight Sinker Soft Carp Fishing Weight Sinkers Terminal Tackle Tools

  • What you'll get: 20 pieces of fishing sinker weights with a length of 3.3 cm/ 1.3 inches and a diameter of 0.8 cm/ 0.3 inches, all of them are packed in a plastic bag with good seal, easy to carry around without worries about losing.
  • Sufficient quantity can meet your different needs, also you can share with your friends.
  • Electrolytic Material: these fishing weights sinkers are made of electrolytic, which is heavy, hard wearing and features good performance, and can serve you for a long time.
  • Water Drop Shape Design: each fishing weight is characterized by water drop shape design, which is designed to reduce resistance and make it easy to drop into water, also it could reduce water splashes and won't scare the fish away, a nice accessory for bottom.
  • Brass Hanging Ring: at the top of the sinker, you can see a brass hanging ring design, which is bold to make it more sturdy to use, rustproof and sturdy, and won't hurt the fishing line because of the smooth and polish surface.
  • Wide Application: the bullet raindrop fishing sinkers can be applied in freshwater and saltwater, the standard weight allows it to sink into the water, which can help you get your fish baits down to other fishing area and attract more fish.
Check Stock

Potassium Hydroxide Flakes KOH Caustic Potash Anhydrous Dry Electrolite - 4 oz Bottle - Food Grade - HDPE Container with resealable Child Resistant Cap…

  • 4 ozs of Potassium Hydroxide (KOH) per container shipped in an HDPE container with a resealable child proof cap..
  • ESSENTIAL DEPOT is the FIRST as well as the ONLY SELLER whose PACKAGING, LABELING, and PRODUCT has been APPROVED by the U.S. government. Our label complies with all federal regulations, our containers (including the caps) comply with applicable regulatory and statutory requirements, and the product itself actually exceeded the government's third party independent laboratory testing standards..
  • Manufactured by the electrolysis of a potassium chloride (KCI) solution using membrane electrolytic cells (but non mercury based). Chlorine and Hydrogen are formed from the electrolytic production as co-products..
  • FORM: dry, solid, flake, anhydrous, hygroscopic (attracting moisture), deliquescent (dissolving in moisture absorbed from the atmosphere) - NUTRITION: No nutritional value. - SOLUBILITY: freely dissolves in water with agitation under proper conditions, without agitation the flakes will fall to the bottom and form a layer of hydrate which will dissolve but very slowly - ODOR: odorless in its dry state.
  • Proudly manufactured in the U.S.A., not imported.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Aquatic Fitness Equipment of 316L Stainless Steel Aquatic Bike In Swimming Pool Water Bike Fitness Equipment Underwater Bike for Exercise

  • Material: 316Lstainless steel as bike body and the surface come with treatment of electrolytic polishing to anti-rust. Adjustable PU cushion for comfort. Adjustable PE Pedal for your size of foot..
  • Parameter: Max open dimensions of 40.55''(L) x 23.6''(W) x 59''(H) (103 cm x 60 cm x 150 cm).
  • Function：This Pool Bike offers a unique design providing users a fun, invigorating, and effective workout. It is ideal for aquatic exercise classes, physical therapy, or a way to get fit in your own backyard pool..
  • Pedal adjusts resistance: The water retaining plate moves up and down by the elastic nuts, which adjusts the resistance to your fitness level and the goals you are trying to achieve. It is the most resistant while the pedal is closed..
  • Benefits: - Adjustable seat & handlebars of the height-Multiple levels of resistance - Barefoot use of the Pedal - Scratch resistant transport wheels to protect your pool surface- Durable stainless steel material..
Check Stock