Reviews Electrical Solder

Interpower 86291290 North American Connector Power Cord, Angled IEC 60320 C13 Connector Type, Black Cable Color, 10A Amperage, 250VAC Voltage, 3.05m Length

IEC 60320 Sheet F, snap-in, four-position accessory module for a variety of electrical applications.
International current and voltage rating of 10 amp at 250 VAC, North American rating of 15 amp at 250 VAC.
Thermoplastic housing for electrical and thermal insulation, with tin-plated brass terminals for conductivity and resistance to corrosion.
Temperature range of -25 to +70 degrees C.
Snap-in mount with three quick disconnects and three solder tabs for attachment of conductors with wire terminals or with solder.

Tin Lead solder wire alloy content, Tin 60%-Pb 40% (Sn60Pb40), Flux 1.7%.
High quality rosin core solder wire. The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth.
Good soldering kit for electrical soldering.
Low Melting Point, 370℉. Weight, 4oz (100g). Diameter, 0.032 In (0.8 mm).

...reak when the screws are tightened,will not lose or slip around.The leads are aligned for a standard breadboard and fit securely.The pins themselves are slim enough to fit through the holes,doesn't destroy the plating on the inside..
Won't lead to strip screw heads,broken solder joints or poor connections.Makes good electrical contact,looks good and neat.Not allow the wire to get off-center when inserted.The connector will not melt things when soldered to them.They are not too thick that fit perfectly next to each other on a protoboard.You can jam them in there and they sit parallel..
Easy to insert into prototype boards and solder the pins.These connectors work well on PCBs.Can be used on a breadboard power rails if plugged in at an angle.The screw connections can open enough to let a wire enter freely,doesn't make it difficult to enter and tighten the wires.Make it easier to swap out things like simple antennas,low voltage power sources,sensors,ect..
Needn't over-torque the screws and they will hold up fine.When you want to move wires,wires come right out with the slightest movement.Great for mounting on or in buildings to attach wires for lighting,so you don't half to desolder delicate LED lead wires every time when want to move a building.Their use ....

Recommended Melting point: 183°C(361°F ).
Good solder ability both in electrical conductivity and thermal conductivity.
Easy to use, be widely applied in electrical repairs(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).

Bring the Heat: Reach the high temperature of 937 degrees F on the low setting or 1400 degrees F on the high setting in 10 seconds or less.
More Power to You: The precision soldering gun has a 55 inch power cord, so you have plenty of space for comfortable and safe soldering DIY projects.
For Cars, Computers, Crafts: The included rosin core solder makes this a great soldering kit for electronics or automotive electrical projects.
Designed to Last: The ergonomic solder gun handle is made from impact and heat resistant polycarbonate.
The barrel is made from corrosion resistant stainless steel.
Kit Includes: A 230/150 watt soldering gun, a general purpose soldering tip, a tip for cutting plastic, .5 oz (14 g) of rosin core solder, and a sturdy carrying case.

Eliminates the need and expense of cleaning.Non-corrosive tack-frees..
Exhibits improved soldering performance to minimize solder bridges (shorts) during rework operations..
Suitable for automotive, computer, telecom..
There are nos to interfere with electrical testing. Exhibits improved soldering performance to minimize solder bridges (shorts) during rework operations..
10ml pen applicator with specially designed felt tip.For rework and up of SMT, SMD, and through hole solder joints..

1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..

【 PARAMETERS 】 Pure Tin Lead electronic solder: Spool weighs 100g/0.22lbs.
The size of solder wire roll is 6.3 x 2.9 x 6.3 cm.
The diameter of the silver soldering wire is 1mm/0.039 inches..
【 DOES IT CONTAIN LEAD? 】YES. The flux core welding wire Contains 37% fine thick lead content in it which brings down the Melting point for welding supplies and thin Rosin Core Reduces Oxidation of the iron with which it is soldered..
【 ADVANTAGES 】This FRIZNO 1mm rosin flux electrical solder melt quickly, has the best flow, is clean, has less smoke, have solid surface, and has a decent welding joint.
【 WHY FRIZNO 】 Anti-oxidation, Low melting point, Fast Welding, Less residue, Not fluxless..
【 ADDITIONAL FEATURES 】Electric Solder Flux provides excellent binding capacity, especially for electric circuit board, DIY, home improvement, fixing of link/TV/Radio/stereo/Toys, and other electronic silver solder devices..

Solder Wire Diameter is 0.032in ( 0.8mm ), gross weight 50gram (0.11lbs),suitable for fine soldering work on connector, wire, IC, Capacitor etc..
High quality lead free solder wire,The Soldering Wire has antioxidant for a long time and good weldability, melts quick and clean, flows smooth..
Lead free solder wire designed for electrical maintenance, such as radios, televisions, video recorders, stereo systems, wires, motors, circuit boards and other electronic devices..
Very good soldering capability, flow well during soldering, easy for soldering,esp for circuit board, DIY, home improvement..
Well Packed for Secure Shipping easily maintained transportable and easy to use Make it yours today..