Reviews Electrical Metallic Tubing Reducing Fittings

ISPINNER 15pcs 1/2 Inch Stainless Steel PEX Cinch Clamps, Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections, Pack of 15

HIGH QUALITY MATERIAL - Made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties..
360-Degree SEAL PROTECTION - These interlocking rings form a complete 360- Degree watertight seal, provide reliable and fast connection of all PEX pipes fittings..
WIDE APPLICATION - Widely used in all plumbing system, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing etc..
EASY INSTALLATION - Slip these pex clamps over the tubing, then slip tubing onto insert fitting. Use the correct cinch tools to close the clamp ear until it is fully engaged. Providing a strong, leak-free and reliable crimp fitting connection..
SIZE - 1/2 inch PEX clamps, fit for 15.0-17.5mm outside diameter pipe. Width x Thickness of 1/2 inch clamp is 7.0 x 0.8mm..

Whole home indoor, gas powered tankless water heater, rated at 4 GPM that activates only on demand and no pilot light needed, reducing energy....
Sleek, modern design with black tempered glass front panel featuring an easy to use LED display controls.
Features fully automatic temperature controls with an energy saving mode and child lock technology.
Plugs into standard 110v electrical outlet with UL-listed cord.
Uses standard 1/2" NPT water fittings and comes with horizontal venting allowing for a convenient and quick installation.

【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....

WIREFY ULTIMATE CONNECTOR KIT - Ring, fork, hook, spade and butt, solder seal and T-Tap heat shrink wire connectors are included in this multipurpose electrical connector kit. You will find the right connector type for your next wiring project..
EXCELLENT WIRE CONTACT - Brazed copper barrels provide increased current flow, and ensure less voltage drop, preventing wiring failures and reducing equipment downtime..
PROFESSIONAL HEAT SHRINK TUBING - Shrinks to 1/3 of its original size, and has heat activated adhesive that bonds the connector to the wire..
COMPLIANT WITH ALL ELECTRICAL STANDARDS - Wirefy heat shrink connectors are compliant with ROHS, ISO 9001:2008, SGS, CE and UL standards. Prevent wiring failures and reduce equipment downtime by choosing certified electrical connectors..
WIREFY QUALITY COMMITMENT - We stand behind the quality of our electrical connectors. All Wirefy electrical wire connectors are backed by our best-in-class, lifetime warranty..

HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..

The product is manufactured in United States.
All sizes of rigid non-metallic conduit fittings are compatible with ENT when using ENT cement..
Rigid non-metallic conduit fittings are recommended for use with Carlon 1-1/4 in. to 2 in. Flex-Plus Blue ENT.
For adapting non-metallic conduits to boxes, threaded fittings and metallic systems.

Works like soaker hose only better because it doesn’t clog and requires no maintenance.
Pressure-compensating emitters water plants evenly from beginning to end of tubing throughout the planting area.
Emitters feature two outlet holes, one on either side of tubing (180° apart).
Built-in 0.8 gallon per hour emitters spaced 6" apart.
Unique Micro-Porous construction creates an ultra-tight connection.
Attach to 1/2" Drip tubing with 1/4" barbed fittings.
Tubing specifications: outside diameter 0.25.

SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
ECO FRIENDLY: Provide water directly where you need it without any overspray!.
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.

Package includes: 340pcs Heat Shrink Butt Connectors Terminals.20Pcs×Black.20Pcs×Yellow.100Pcs×Blue.150Pcs×Red.50Pcs×White..
Tubings of different colors with the mark of wire gauge are easy to recognize. Measure the wiring, and by checking the mark of wire gauge of the polyolefin tubing, you can choose the right connector very easily..
Translucent heat shrink tubing provides high tensile strength and resistance to stretch and mechanical damage. Thick barrel ensures strong crimp every time. Your wire will never slip out of these heat shrink butt connectors..
Dual-walled design, polyolefin tubing in outside and hot melt adhesive in inside. The thicker and better copper of the heat shrink butt connectors provides increased current flow andensures less voltage drop, preventing wiring failures and reducing equipment downtime..
Widely used in marine/watercraft,automobile/automotive , electrical and electronics industries..