Reviews Electric Trailer Jack 500lbs

LIBRA 10 x 2-1/4 Trailer Electric Brake Assembly 2 Pairs

Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (2 left + 2 right) for two axles.
works with most 3,500 lbs trailer axles in the market.
Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included.
Exchange with Dexter brake # 023-026-00/023-027-00.

【WHAT ARE INSIDE THE BOX】1PC Electric A-Frame Jack , 3PC Flat&Star Washers, 1PC Manual Crank Handle, 1PC Level and 1SET Instruction Manual. Red wire(+) connect to 12-volt power source..
【DURABLE AND STURDY】Made of heavy duty steel, the electric A-frame trailer jack is rated capacity up to 3500LBS. Durable exterior black powder-coat finish on outer tube and zinc finish for inner tube with removable footplate will provide good surface protection and greatly reduce the rusty risks..
【TERRIFIC FEATURES】The purpose is for use with trailers with a A-frame coupler by wiring to 12-volt power source. The maximum travel is 18in. the standard tube diameter for a-frame trailer jacks is 2.25 inches, and the drop leg travel is 5-5/8in. Four holes on the footplate bracket are for height adjustment by securing with the locking pin. Bright LED lights are illuminated for night time..
【TIME-SAVING】Just push the UP switch to extend the jack until the footplate touches the ground. Retract the jack by pushing the DOWN Switch. The jack will slow down and stop as it approaches the fully retracted position. Release the swit....

【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place.
Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin..
【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.

ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV’s and Trailers (Less Stress on Your Trailer) – Includes ONE Trailer Jack Block.
RECESSED PAD AREA IS 9-1/8″ diameter, recessed post-hole is 2-1/2″ diameter.
DIMENSIONS: 8″ tall, 12″ diameter at base, 10″ diameter at top (14″ tall when double-stacked).
HEAVY-DUTY AND BUILT TO LAST! Rated at 6,000 lbs. (single block) and 1,500 lbs. (double-stacked).
100% MADE IN THE USA AND COMES WITH A LIFETIME WARRANTY!.

【Capacity】This boat trailer jack is rated to support up to 1500 lbs, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue, 360 degrees rotatation double wheel make it stronger bearing capacity.
【Size】Travel Distance Length: 10 inch (254mm), Retracted Length: 12.6 inch (320mm), Extended Length: 22.6 inch (574mm) (measured from center of mounting plate to bottom of wheel).
【Convenient Mobility】For easier coupling and positioning of your boat trailer, this jack comes with an 6-inch diameter trailer jack double wheel and a convenient handle which allows you to easily swing jack in place, pivot up to stow parallel to trailer tongue for travel, move back into upright position for use.
【Swivel Design】To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket with the 1/2" pull pin. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
【Corrosion Resistant】This marine boat trailer jack is protected in a durable zinc-plated finish, for long-lasting corrosion resistance against water, dirt, road salt and more.

Electric RV Stabilizer Jack Motor for High Speed Power Models (Stabilizer Jack NOT Included).
OEM Part Number: 352338, 138445, 178562, 162307, 113407, K01285-C800, K01285C800, K01531A800, K01531-A800.
Power stabilizer jack motor make it faster, easier and simpler to get your 5th wheel RV or travel trailer up and running at the campsite camping. These units will save you a lot of time to enjoy your camping..
Specifications: 12V DC, 7 Amps, 53:1 Gear Ratio, 68 RPM, 50 IN/LBS Run Torque.

Heavy-duty trailer jack reliably raises and lowers trailer to the desired heights.
Durable fixed-mount jack designed for mounting on trailer frames of up to 3 inches x 5 inches.
Jack provides an impressive 28.6 inches of lift.

【Measurement】: About 8" tall, 12" diameter at base, 10" diameter at top (14" tall when double-stacked), recessed post-hole is 2-1/2" diameter..
【New upgraded】: We have upgraded the internal structure and have a stronger load-bearing capacity, extremely strong and durable. Powerful built-in magnets for easy set up!.
【Heavy Duty Construction】: Rophor RV trailer jack blocks are made of high-quality HDPE material for years of rugged use. Resists dirt, grime and oil. Rated at 6,500 lbs (single block) and 1800 lbs (double-stack)..
【Widely Usage】: fits 9” round metal feet on many 5th Wheels RVs and supports nearly any tongue jack foot. ELIMINATES NEARLY ALL MOVEMENT AND SWAY in parked RV's and Trailers (Less Stress on Your Trailer)..
【Why Choose Us】: Rophor specializes in the production of various RV accessories. 100% of the products have been rigorously tested to ensure that each product received by our user can work perfectly. Won’t sacrifice the quality for the price, we provide 5 years of worry-free maintenance, and look forward to your letter..

2 x trailer 5 on 5" hub drum kits + 2 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle.