Reviews Electric Body Saw

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

AVID POWER Circular Saw, 15 Amp Corded Circular Saw 7-1/4 Inch Electric Saw for Cutting Wood, Metal and Plastic, Solid Aluminum Base Plate

  • [Quality Material]: The AVID POWER Electric Circular Saw is made of pure copper with aluminum base plate processed by solid aluminum which provides a stronger, smoother and higher cutting accuracy..
  • [Versatile Structure]: The circular saw bevel lever allows you to change cutting angle freely from 0° to 45°. Equipped with adjustable cutting depth, the max cutting depth of 1-11/16" at 90° and 1-1/8" at 45° can meet your needs..
  • [Powerful Features]: This corded saw is built with 15 Amp powerful motor and 7-1/4" x 24T saw blade for better performance and heat dissipation. The cutting speed of this saw is up to 5000 RPM, which provides stronger power for the electric saw and greatly saves work time..
  • [Ergonomic Design]: The comfortable handle reduces fatigue, provides stronger clamping force, which makes cutting stable. The lock button and switch design double guarantee your safety, prevent the machine from opening accidentally..
  • [Package Includes]: 1x Circular saw, 1x 24-T Circular saw blade, 1x Cutting guide, 1x Hex key, 1x Instruction manual, and 1x Warranty card..
Check Stock

DIYAREA 850W Commercial Meat Saw Bone Cutter 19.1'x14.2' Workbench for Butchering, 110V 1.2HP Butcher Bandsaw Electric Frozen Meat Cutting Machine with 4 Sawing Blades Cutting Height 200mm

  • [Large Area Workbench] - The DIYAREA 304 stainless steel workbench reaches up to 19.1"x14.2", which can provide sufficient cutting space. It comes with 2 different sizes of saw blades for this electric bone saw machine, 4mm and 6mm to meet your needs. Asin of the extra blades: B09VNNPSF3.
  • [Superior Material] - The electric bone cutting machine is made of cast aluminum body and 304 stainless steel workbench, It is much more durable, rustproof, corrosion-resistant, and easy to clean. 850W powerful motor for our frozen meat cutting machine with pure copper material, lower noise, high efficiency.
  • [Accurate Cutting] - Precision scale on the 304 stainless steel worktable, can adjust the cutting thickness according to your needs. Adjust the Knob to adjust the cutting thickness.
  • [Simple and safe operation] - Two side blades on the push board make your cutting easier and safer, the safety handle design makes you away from sharp blades.
  • [Wide Application] - This 850w commercial bone saw machine can cut large-sized meat products like frozen meat, frozen fish, pork ribs.....etc. it is widely used in home kitchens, butchers, guesthouses, hotels, food processing factories, and slaughterhouse.
Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings

  • Carbon Brush Size (Approx.): 10 x 5 x 5mm / 0.39" x 0.2" x 0.2" (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock

Electric Bone Saw Machine 1500W Commercial Frozen Meat Fish Cutter Heavy-Duty 0.4-5.9 Inch Thickness Countertop Model Meat Bandsaw for Cutting Frozen Meat Fish Beef, Includes 6 Saw Blades

  • ...stabilizer, a wider push rod, a waterproof switch, two locks and four anti-skid bases and other multiple protection devices to improve the stability and safety of the machine. These devices can keep your hands away from sharp saw blades, making the entire cutting process safer..
  • Widely Application: This professional electric bone sawing machine can cut bones, frozen meat and fish conveniently and easily. It is widely used in meat processing plants, kitchens, supermarkets, restaurants, etc. This machine is mainly used for cutting frozen meat and meat with bones, but it is not suitable for meat without bones at room temperature..
  • High-Quality Materials: Aluminum alloy body, the food contact part is made of 304 stainless steel, and the saw blade is made of solid steel, which is strong and durable, not easy to rust, and easy to clean. Voltage: 110V.
Check Stock

Earthwise Power Tools by ALM LCS0620P 2-in-1 6-in. Cordless Mini Chainsaw, Pole Chainsaw. 20-volt 2Ah Battery and Charger Included, Green

  • Earthwise electric pole saw with a powerful 20-volt brush motor powered by a 20 volt 2.0ah lithium-ion battery and fast charger. The Earthwise 20-volt lithium-ion battery is compatible with other Earthwise products that need a 20-volt battery.
  • Mini Pole saw with 6" tri-link bar and chain with, includes a protective blade and chain cover for safe and easy storage".
  • lightweight electric pole saw for tree trimming that is easy and comfortable to use.
  • The electric mini chain saw is equipped with an extension pole that extends up to 7ft. This makes tree trimming easier and safer for you since you can stay safely on the ground while cutting hard-to-reach tree branches..
Check Stock