Reviews Easy Installation Heaters

Broan-NuTone 66W NuTone Ventilation, Independent Switches for Heaters and Fans, 15 Amp, 120V, White Three-Function Wall Control, 20

  • CONTROL PANEL: 3-switch wall panel turns lights, heaters, and vents on and off for your convenience.
  • EFFICIENT: Three 15 amp rocker switches operate on 120V for a high-quality performance every use.
  • EASY INSTALLATION: Wall panel fits into single-gang openings to allow for a simple and easy installation.
  • VERSATILE: 3-switch control panel is compatible with any Broan-NuTone heater or fan within the amp range.
  • COHESIVE: White plastic control panel matches perfectly to any decor.
  • Three independent, 120 VAC, 15 Amp rocker switches (20 Amp total).
  • Use with all Brogan fans and heaters within Amp rating.
Check Stock

SmartJacket Water Heater Blanket Insulation System Energy Star Certified R value-7.1

  • WATER HEATER BLANKET - SmartJACKET is a unique system that creates a space between the blanket and the water heater tank to achieve better results..
  • IMPROVE EFFICIENCY - Improve the efficiency of 95% of all water heaters in use today, Reduce Heat loss Up to 40 %..
  • SIMPLE INSTALLATION - Easy to install and easy to clean, fits gas or electric water heaters..
  • ENVIRONMENTALLY FRIENDLY - Non-toxic, non-carcinogenic. Contains no fiberglass..
  • PROTECT YOUR INVESTMENT - Prolongs the life of your water heater, Fits all 20 to 60 gallon tanks..
Check Stock

RHS Snow Melting System Roof and Valley Heater Ice and Snow Melting Mats Sizes 10 feet x 13 inches Color black 10ft mat melts 2 inches of snow per hour buy factory direct 10 ft x 13 in

  • ...re made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 10 feet length (can be made in 8', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more clinbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remodeling, and existing roofs. Installing RHS Valley Heater Systems can increase the life of your roof in addition it will enhance the value of your home or comm....
Check Stock

RHS Snow Melting System, Roof and Valley Heater, Ice and Snow Melting Mats, Sizes 5' feet x 13' inches, Color Black, 5 ft. mat Melts 2' inches of Snow per Hour, Buy Factory Direct, (5' ft. x 13' in.)

  • ...re made to sustain the most harsh environments. RHS Valley heaters have a complete waterproof system which serves for the most demanding environments including hazardous and non-hazardous areas, as well as areas where corrosives may be of concern. The valley heaters provides 40 watts per foot at 120 volt..
  • Easy installation, valley heaters are 5 feet length (can be made in 8', 10', 15', and any other size up to 50' ft. for custom orders) roofing grommet screws included with the system are 100% waterproof and easy to insert on the valley heaters..
  • No more climbing on a ladder to shovel your roof, RHS Valley Heaters go right over the problem areas on the valley, 6.5" inches to one side and 6.5" inches to the other side to completely melt the snow from the valley, just attach the grommet screws at the labeled locations to secure in place and relax, and watch RHS Valley Heaters get the job done..
  • RHS Valley Heater System provides with the most proficient, highly scalable and eco-friendly snow melting solution. Our roof systems are offered for all types of applications, including new construction, remodeling, and existing roofs. Installing RHS Valley Heater Systems can increase the life of your roof in addition it will enhance the value of your home or ....
Check Stock

Stanbroil 90° Elbow Connector Replacement for Olympian Low Pressure Gas Fired Heaters - 3/8 Female Flare x 3/8 Male Flare

  • Perfect for use with the Wave 3, or catalytic safety heaters..
  • For use with our Olympian low pressure gas fired heaters..
  • The elbow is able to provide easy installation..
Check Stock

Heatstorm Benton Glace Heater, 16x48, Concrete

  • Decorative heater - add to your beautiful home’s thoughtful decor while providing gentle, radiant heat to kitchens, bathrooms, bedrooms, living rooms or any room.
  • Glass art mural - with a wider range of high definition photo artwork to choose from, fit the look and style of any home, room or office.
  • Easy to install - our glass panel wall art heater is quick and easy to setup, with zero maintenance needed after installation.
  • Durable - Heat storm wall mounted space heaters are built without any moving components which gives the system a long life expectancy.
  • Energy efficient comfort - enjoy precise levels of controlled comfort as well as peace of mind knowing our heaters use energy efficient radiant heating to cut down on power consumption.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • ...rs Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • ...arders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (6 ft, Cover + L&R End Caps)

  • ...rders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock