Reviews Easy Change Tool Holder

Knurling Knurler Tool Holder 2cm/0.8inch Spring Loaded Holder Linear Knurl Tool Lathe Adjustable Shank with 4 Spare Knurling Wheels 45# Carbon Steel CR15 for 7X Mini Lathe

  • This knurling tool is made of high quality 45 # carbon steel, and the wheels are made of CR15, durable in use..
  • This knurling tool is specifically for the mini lathe..
  • Great design helps reducing the load on the lathe spindle bearings compared to any other standard knurling tool..
  • Pressure is applied via the turn screw instead of the lathe cross slide..
  • Knurling tool holder is also works with any of the quick change tool posts. This knurling tool fits in the standard tool post of the mini lathe without any modification..
Check Stock

ColumPRO 20PCS 1/4" Strong Magnetic Extension Bit Holder,Hex Shank S2 Steel Magnetic,Screwdriver Extension,Quick-Change Hex Shank Set

  • ✅【Superior material】:Strong Magnetic Extension Bit Holder is made of high-quality S2 Steel ,and the sleeve is made of high-quality aluminum alloy.Wear-resistant, high-strength, hard, not easy to break and not easy to damage..
  • ✅【Strong magnetic】:The drill seat has permanent magnets to ensure a secure fit of the drill seat. With super magnetic, good adsorption, hold the drill bit and fasteners tightly, there is no trouble of dropping tools during the work..
  • ✅【Wide applications】:ColumPRO Strong Magnetic Extension Bit Holder has a universal 1/4" hex shank for a variety of quick change chucks and hex tools,and is a good helper for daily tool use..
  • ✅【package Accessories】: 20PCS 1/4" Strong Magnetic Extension Bit Holder are stored in a box.It can meet the needs of daily work..
  • ✅【Product Upgrade】:ColumPRO is a store that regularly upgrades and optimizes products to present better products to customers..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Replacement Blade with Crescent Tool 2 Sets Juicer Replacement Parts and Screws Fusion Juicer Parts Compatible with Jack Lalanne Power Juicer

  • Package content: the package comes with 2 sets of juicer replacement parts, each set comes with 1 piece of replacement blade, 1 piece of crescent tool....
  • Reliable construction: the blades are made of stainless steel material, which is solid and firm in construction, hard to wear or tear, rust resistant....
  • Wide compatibility: the silver replacement blades are compatible with all Jack lalanne power juicer models expect all MT models, the crescent tool is....
  • Simple installation: you just simply remove the old blade from the holder and replace it with a new blade, all blades are covered with self-adhesive....
  • Save much money: the fusion juicer parts can help save you much money, you never need to change the whole juicer, but just need to change the juice....
Check Stock

uxcell Indexable CNC Lathe Turning Tool Holder 93°DVJNR2020K16 3/4 Shank Carbon Steel Carbide Turning Tool Holder for Turning Grooving Threading

  • [Specification] - Cutting Angle: 93°, Cutting Direction: Right, Material: High Steel, Model: DVJNR2020K16, Holder Width: 20mm / 0.79inch, Holder Thickness: 20mm / 0.79inch, Total Length: 125mm / 4.92inch, Available Inserts: VNMG16 Inserts.
  • [Durable to Use] - The material of the turning tool holder is Carbon Steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance..
  • [Finish] - Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size for easy identification of the tool holder..
  • [Wide Range of Applications] - The boring bar is suitable for cutting step surface processing and other processing..
  • [Package Content] - You will receive 1pc indexable lathe turning tool holder(carbide insert not included) and 1pc wrench..
Check Stock

13-piece Air Hammer Set with 5pcs Chisels, Quick Change Retainer and Spring Retainer, 3500BPM Air Chisel Hammer with Rubber Sleeve Handle, Heavy Duty Air Hammer Kit

  • ⚙️ 13-piece AIR HAMMER KIT: This air hammer set includes 1pcs long barrel air hammer, 5pcs different types of air hammer chisel bits, 1pcs quick-change chisel retainer, 1pcs spring retainer for backup use, 1pcs hexagonal wrench to tighten or loosen the quick change retainer, 1pcs teflon tape to install the air fitting without leaks, 1pcs 1/4'' NPT air inlet fitting can be connected to your air hose perfectly, 1 pair of hand gloves to absorb the vibration and protect your hands..
  • ⚙️ QUICK CHANGE RETAINER: The air hammer kit comes with 2 types of chisel retainers. One is quick change chisel holder, the other is air hammer spring holder. The air hammer quick change retainer is convenient, efficient and safe to change chisel head with built-in strong spring which effectively alleviates vibration. The spring retainer is great for backup use, you can choose either one which you like, both chisel retainers can work perfectly with this pneumatic chisel hammer..
  • ⚙️ OUTSTANDING PERFORMANCE: This heavy duty air hammer could rapidly chip, shovel, cut of metal, weld slag, tiles or bricks, the cylinder is made of alloy steel which is strengthened, the piston is heat-treated and more resistant to high temperature.The impact frequency of this air tool is v....
Check Stock

BOSCH Bare-Tool CRS180B 18-Volt Lithium-Ion Reciprocating Saw

  • EFFICIENT: The Bosch CRS180B reciprocating saw delivers 1-1 8-inch stroke to remove more material per stroke. With a Bosch exclusive Lockjaw blade holder for fast one-handed blade changes, this reciprocating saw is built for speed and efficiency..
  • VERSATILE: With 2 included speed ranges, 0-2,400 SPM and 0-2,700 SPM, the reciprocating saw allows you to match the speed of the tool to the application. It easily handles multiple materials.
  • CONVENIENT: The cordless saw also features a variable speed trigger which allows the user to ease into the cut without any kickback. At only 7.6 lbs, the Bosch CRS180B is convenient for over-head cutting..
  • ERGONOMIC: The saw provides an ergonomically shaped handle with comfort zone in the soft-grip area for a secure hold and low user fatigue.
  • COMPACT: The Bosch CRS180B’s compact size makes it easier to get into tight spaces where other reciprocating saws won’t fit. A lightweight tool means less fatigue and this saw delivers the best power-to-weight ratio in its class..
  • Compact size makes it easier to get into tight spaces.
  • 2-speed allows you to adjust to the material your up against.
  • Lock-Jaw blade holder is the easiest blade change system.
  • 1 1/8" stroke allows for more material to....
Check Stock

Case Compatible with Silhouette for Cameo 4 3 2 1 Blade Tools and Auto Blades, 35+pcs Tool Organizer Holder for Rotary Blade Kraft Blade AutoBlade Pen Holder Punch Blade Tool Adapter Set (Box Only)

  • Blades Carrying Case: Blade holder fits for Silhouette SILHBLADEAUTO for CAMEO 4 Plus/ for Pro Rotary Blade/ for Premium Blade/ for Tool Adapter Set/ for Kraft Blade/ for AutoBlade/ for Pen Holder/ for High Pressure Punch Blade/ for America SILH Punch Tool. Blade box also fits for Silhouette SILH PREM Cameo 1, 2, 3 blade,organize all your vinyl fabric cutting replacement blades and for silhouette for cameo 4 accessories. (Only blade organizer case).
  • Large Blade Holder: Cutting blade case with extra zippered mesh pocket to hold more cutting replacement blades and for silhouette accessories. 35 precise slots to ensure for silhouette blade stably, easy to insert and remove. The detachable foam of tool storage case gives the possibility of multiple for Cameo Fabric Blades. External dimension: 7.25*5*3.5 inches..
  • High-quality Blade Organizer Box: Knife case storage holder is made of hard EVA material, with good shockproof, vinyl cutting machine blade holder giving for silhouette for cameo 4 blades best protection..
  • Tool Box Organizer with Unique Design: Blade storage case with 360-degree sturdy and smooth zipper, easy to op....
Check Stock

Screw Extractor Tool XOOL Screw Extractor Kit 22 Pieces with Magnetic Extension Drill Holder Adapter Used for Disconnecting Screws and Bolts

  • 【Damaged Screwdriver】XOOL screwdriver tool is made of high-quality high-speed steel 4241. High hardness, durable and easy to remove damaged screws.
  • 【Size】The screwdriver set includes 10 drill bits (sizes from #1-#10), 10 screwdrivers (sizes from #1-#10), 1 extended drill bit bracket and 1....
  • 【Extension】The magnetic bit holder with adjustable collar of typeset can help to absorb high-torque of new impact drivers.Quick change bit holder....
  • 【Widely Used】Basically meet your needs for removing various screws. Such as hexagon socket bolts, square head bolts, hexagon bolts, machine....
  • 【Note】You’d better install them on the electric hand drill (suitable for basic electric hand drill) instead of hammer drill when stripping the....
Check Stock