Reviews E sata Card

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock

Cablecc USB 3.0 to SATA 22pin 2.5 Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD Adapter Converter

  • USB 3.0 to SATA 22pin 2.5" Hard Disk to 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF and mSATA SSD Adapter Converter.
  • The item included one cable and one PCBA..
  • Build in Mini PCI-e 52pin Female connector.
  • Build in M.2 (NGFF) B key Female connector.
  • Insert both M.2 and mSATA SSD on the PCBA,M.2 SSD is the first priority.mSATA won't work. Support SATA Reversion 3.2.
  • PCI Express M.2 Spec.Revision 0.7, Version 1.0 PCI Express Mini Card Electromechanical Spec.1.2 PWM synchronous buck converter Power IC 3A maximum output current Short circuit protection In-rush current suppression Thermal shutdown protection ESD HBM (Human Body Mode)/2KV Note: The adapter only work for B-key or B/M-key socket, cannot work for M-key socket..
Check Stock

NFHK 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA

  • 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA, 2.5" SATA SSD Form Factor : 98 x 65.5mm.
  • M.2 (NGFF) & mSATA to SATA III Module, Build in Mini PCI-e 52pin Female connector, Build in M.2 (NGFF) B key Female connector, Insert both M.2 & mSATA....
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0, PCI Express Mini Card Electromechanical Spec. 1.2, PWM synchronous buck converter Power IC.
  • 3A maximum output current, Short circuit protection, In-rush current suppression, Thermal shutdown protection, ESD HBM (Human Body Mode)/2KV.
  • the MSATA and NGFF SSD cannot work at same time. The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
Check Stock

Rivo PCIe SATA Card, 8 Port with 8 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 8 SATA 3.0 Devices(SA3014)

  • ➤8 Ports Adapter Card --- You could add 8 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card..
  • ➤For All PCs --- PCIe to SATA 3.0 8 Port Expansion Card with a low profile Bracket and 6 SATA Cables，compatible with 99% size chassis on the market..
  • ➤Chipset --- With using The chip 88SE9215+JMB583, improve this card more stable and compatible..
  • ➤System Support --- Connect 8 large capacity storage devices at the same time. Compatible with Windows XP / 7 / 8 / 10 / MAC / NAS / Linux OS.NO Driver required.( Please go to the SSD's website and find and install the NVMe driver for Windows/Linux OS if no drives appear in the Device/Disk manage ).
  • ➤You could make the system to boot from this SATA card but non RAID. But If your motherboard has RAID function, you could make a RAID with this SATA card..
Check Stock

BEYIMEI PCIe SATA Card 8 Ports with 8 SATA Cables Power Splitter Cable andLow Profile Bracket,SATA 3.0 Controller Expansion Card PCI-E X1 3.0 Gen3 6Gbps Controller Card ASM1064+JMB575

  • 8 Ports Sata Card--- This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer..
  • Powerful chip --- Using the ASMedia ASM1064+JMB5XX, enhances heat dissipation, long-lasting high temperature resistance and more stable operation..
  • Support interface --- There is an available PCI Express X1 slot, while supporting PCI-E X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for....
  • Support system --- WIN8 /WIN10/ LINUX。Easy to install, plug and play..
  • This PCIe 1X 8SATA expansion card contains Included 8 SATA cables and 15pin SATA power splitter cable, make connection easier.It provides you with a....
Check Stock

Mailiya 6 Port PCIe x4 SATA Card with 6 SATA Cables SATA 3.0 Controller Expansion Card Low Profile Bracket and Heatsink 6Gbps Speed None Raid Support 6 SATA 3.0 Devices

  • With 6 Ports SATA card, you can add 6 SATA III 6Gbps devices to your desktop PCs, servers, and NAS system for HDD/SSD storage expansion, also 6 SATA....
  • PCIe SATA III card based on ASMedia ASM1166 chip, more stable and wider compatible. you could make the system to boot from this SATA Card but non....
  • Support interface: PCIe x4 lanes, support PCI-e X4/ X8/ X16 slots at the same time. Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto....
  • Equipped with low profile bracket can also works for mini PC, and special made heatsink will keep your device under good performance and full-load....
  • The SATA expansion card works for Windows OS/MAC/NAS/Ubuntu, perfect for gaming pc and IPFS Mining Rig. Plug and play, no driver needed..
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
  • Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
  • Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
  • Cost-effective 2-pack provides a spare power cable for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
  • Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
Check Stock

Mailiya SATA Card, 6 Ports PCIe SATA 3.0 6Gbps Expansion Controller Card with 6 SATA Cables and Heatsink, None Raid, Support 6 SATA 3.0 Devices

  • Mailiya Pcie SATA III card Adopts ASMedia ASM1166 chip, the most stable Non-Raid PCIE 3.0 SATA controller solution to improve the stability and compatibility of the card..
  • With 6 Ports works on one Pcie to SATA 3.0 expansion card, you are able to add 6 SATA III 6Gb/s drive for your desktop, which will be a great improvement for the computer speed, and 6 SATA cables simplify the connection..
  • Plug and play, no driver needed, works on Windows, MAC OS, Linux System, and also works on Ubuntu system, perfect for IPFS mining rig..
  • Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherboard PCIE X1,X4, X8, X16 slot..
  • Super heatsink is a great protect solution for your SSD, and solid capacitors for stabilizing the power supply. With LED indicates the status, leaves you no worry at all!.
Check Stock