Reviews Dust Collection System For Garage

Grizzly Industrial G0697X - 12\ 7-1/2 HP 3-Phase Extreme Series® Table Saw

  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0.010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the available dust collection blade guard (Model # TSG-DC, sold separately), and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

POWERTEC 70132 14-Inch Table Saw Dust Hood

  • INCLUDES: 14” Table Saw Dust Collector Hood.
  • FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris.
  • VERSATILE: Firmly attaches and secures to most table saws in a variety of positions (underneath or behind) and is ideal for a plethora of popular brand models, including Delta, Craftsman and others.
  • PREMIUM BUILD: Made with lightweight ABS plastic, featuring a high quality construction designed for strength and long-term durability to support your dust collection system.
  • DIMENSIONS: Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) and accepts standard 4” ID dust collector hose or 4” ID fittings.
Check Stock

SawStop 10-Inch Professional Cabinet Saw 3-HP 52-Inch Professional TGlide Fence System PCS31230-TGP252

  • 52-INCH T-GLIDE FENCE ASSEMBLY: The 52-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap..
  • DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Diamond Central Vacuum Accessory Kit w/Sebo ET-1 (Pigtail, 35')

  • ...Canadian Made since 1997. Manufacturer's Suggested Retail Price (MSRP): $US 1170. Three Stage 5.7 inch Fan System Ametek Lamb Premium Class Tangential Discharge Bypass Motor. Performance: 600 air watts, 142 inch water lift suction power, 124 CFM Air Flow, 1,855 Watt Cleaning Power, Operating Voltage ~120v, 5 Gallon Collection Capacity.
  • ✅ This complete system with the Main Power Unit, Noise Dampening Exhaust Muffler, Deluxe Switched 30 Foot Electric hose and Carpet Electric Powerhead, Natural Horsehair non-scratch Cleaning Tool Set. Hose Cover, Dust Mop, Full Garage Kit (includes 30 foot hose and cleaning tools), Tool Cady, and Tool Bag..
  • ✅ Permanent Self-Cleaning Maintenance-Free high Permeability Micro Fiber Filtration System - This patented material traps dirt particles of 3 micrometer in size with 99.98% efficiency rate (3 micrometer is less than 1/10 of the average thickness of human hair)..
  • ✅ Tangential Discharge Bypass Motor: Bypass system means that the motor and fan (pump) system are totally segregated allowing cool and clean motor ambient. Separate fan system maintains motor operating temperature improving reliability. The Tangential discharge feature will allow the vacuumed air to be fully exhausted to the outside environment - Ultimate ....
Check Stock

POWERTEC 70132V 14\ Table Saw Dust Hood, 1 PK

  • INCLUDES: (1) 14 Inch Table Saw Dust Collector Hood..
  • FUNCTION: Makes a great seal for dust collection hose applications, ensuring optimum air quality while increasing workshop cleanliness by efficiently collecting dust, dirt and debris..
  • VERSATILE: Ideal for a plethora of popular brand models, including Delta, Craftsman and others. Firmly attaches and secures to most table saws in a variety of positions (underneath or behind)..
  • PREMIUM BUILD: Designed for strength and long-term durability to support your dust collection system. Made with lightweight ABS plastic, featuring a high quality construction ..
  • DIMENSIONS: Accepts standard 4” ID dust collector hose or 4” ID fittings. Outer size 14-1/16” x 14-1/16” with nominal 4” OD port (actual size tapers from 3-7/8” to 4”) ..
Check Stock

BLACK+DECKER Random Orbit Sander, 5-Inch (BDERO100)

  • HIGH PERFORMANCE ORBIT SANDER - 2.0 Amp corded electric random orbit sander for a swirl-free finish.
  • HIGH EFFICIENCY - Delivers 12000 OPM (orbits per minute) to quickly sand material.
  • LIGHTWEIGHT AND COMPACT - Fits in tight spaces for more versatile sanding.
  • DUST COLLECTION SYSTEM - Keep your workspace free of dust and debris with a built-in dust collection bag.
  • COMFORT GRIP HANDLE - Work comfortably and with less fatigue thanks to the comfort grip handle.
Check Stock