Reviews Dust Catcher For Hole Saw

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

Table saw cover-Cabinet Table Saw cover-4-10 inch table saw, Table saw dust cover-Anti Dust Case Clear Plastic Guard Universal for 4-10 Inch Saw (R-shaped universal 4-10inch)

  • The dust collector can be connected through the dust collecting port,Ideal solution for table saw safety and dust control.
  • Connected to your dust collection system, it captures the dust thrown up by your table saw blade,Diameter of dust collection port 32mm/1.25inch.
  • Table saw cover: Universal protective cover for 4-10 inch table saw and Cabinet Table Saw .et other.According to the size of your saw or the diameter of the exposed saw to choose the right..
  • Independent lateral slides minimize blade exposure,At the same time, it protects human safety,Practical tool parts for workers and make the machine more durable..
  • Strong and Reliable: Made of premium plastic, long-lasting and durable,The plastic strength of the table saw guard is so strong that even with a hammer it cannot be easily smashed.
  • Size:4-10 inch table saw blade cover, support 4-10in saw blade,Product size 42cm/16.5inch x 22cm/8.66inch.
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

  • In layman's terms, the inner hole of the saw blade is larger. For saw blade clamping plate and electric saw clamping, the hole is larger, so we need to use washers to reduce the diameter! Saw blade reducing ring, inner hole switching ring, saw blade inner hole switching reducing ring, it is convenient to use with saw blade splint, electric grinder and electric saw..
  • Main specifications: Outer diameter-inner diameter 5/8Inch to 1/2inch, 0.78Inch to 5/8Inch, 7/8Inch to 5/8Inch, 1inch to 5/8Inch, 1.25Inch to 7/8Inch, 1Inch to 0.78Inch. Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
  • Usage description: adapters to mount brush cutter blade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
  • 12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
  • VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent ....
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

HSS Hole Saw Kits for Metal, 15pcs High-Speed Steel Hole Saw Bits, Sharp and Durable, for Cutting Holes on Wood, Plastic Sheet, Stainless Steel, Iron, Aluminum Plate(Hole Size: 15-53mm, 0.6-2.1in)

  • 【Hole Saw Kits】- There are 15 sizes of hole saws for you to choose. You can cut holes from 15mm/0.59in to 3mm/2.1in according to your needs..
  • 【Resistance and Durable】- The hole saw kit is made of HSS high-speed steel. The saw blade is extremely sharp, low consumption, durable, impact resistance and wear resistance..
  • 【High Hardness】- The saw blade is quenched and has high hardness and strength(hardness 59-60HRC). Hole saw kits can drill about 7/9" depth for the wood, and 1/5" for the stainless steel..
  • 【Individual Package】- Each HSS hole saw is individually packaged in a plastic box. You can easily use and store them..
  • 【Wide Range of Applications】-The carbide teeth of the hole saw kit is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
Check Stock

tonchean 6PCS Drill Bits Hole Saw Set Carbide Hole Cutter Set 5/8-2inch(16-51mm) Heavy Duty Hole Saw Kit for Plastic, Stainless Steel, Metal, Iron, Aluminum, Alloy, Wood, with Aluminum Case

  • 【Hole Saw Set Includes】6pcs hole cutters with dimensions 5/8"(16mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-3/4"(45mm), 2"(51mm), 3pcs pilot drill bits and 1 pc hex key. A variety of sizes to meet your different needs..
  • 【High Quality】The Hole Saw is made of stainless steel, High-grade Titanium-plated carbide pilot drill bit, ensuring its high hardness, sturdy, durable and no teeth breakage for any tough job with high-quality stainless steel technology..
  • 【Easy to Use】Carbide Hole Saw Kit Meet all of your cutting and drilling needs with sharp teeth and center drill with spring ,this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the wood chops out of the saw immediately after completing the hole..
  • 【Alumium Case for Portability】When it’s time to carry your hole saw kit with you to other jobs, it’s important to have a good quality case that will protect your heavy duty tools and hold it together so it doesn’t scatter around when it’s time to put it to use. At tonchean, we provide a high-quality hard and tough aluminum case for each hole saw kit for easy storage and convenience..
  • 【Wide Application】Widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, an....
Check Stock

MKC 2 inch HSS Hole Saw Set High-Speed Steel Bi-Metal Kit, 6 Saw Blades with Mandrel for Wood, PVC, Drywall, Metal, Stainless Steel

  • 【18 PCS BUNDLE】 This hole saw kit includes 6 SAW BLADES, 3 MANDRELS, 3 PCS of 3" (78mm) drill bits, 6 Extra screwdriver bits..
  • 【ADVANCED PRODUCTION TECHNOLOG】Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life.
  • 【FAST & SMOOTH CUTTING】Specially designed hole saws with several generation improvements ensure a clean and precious cutting, smooth and efficient cutting experience.
  • 【UNIVERSAL APPLICATION】 This hole saw set is your ideal choice for Wood, PVC, Drywall, Aluminum, Metal, Stainless Steel cutting.
  • 【HOLE SAW SIZE】Our hole saw kit includes 6 saw blades of size: 6PCS 2"(51mm). The max cutting depth is 1-1/2inch(38mm).
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock