Reviews Durable Air Ducts

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

Professional Grade Aluminum Foil Tape - 2 Inch by 210 Feet 70 Yards 3.6 Mil - High Temperature - Perfect for HVAC Sealing & Patching Hot & Cold Air Ducts Metal Repair More!

  • 2 INCH BY 70 Yards - 33% MORE THAN THE COMPETITION! - Made in a Beautiful Silver Metal Finish..
  • INCREDIBLY RESISTANT - Easily Resists Moisture, UV Rays, Flames, Chemicals, and Performs well in any type of Weather!.
  • PERFECT FOR SEALING AIR DUCTS - Designed to easily seal HVAC Air Ducts as well as another other Hot or Cold Intakes..
  • STICKS TO ANY SURFACE - Designed for HVAC but easily sticks to any type of finish, just ensure surface is clean of debris..
  • TEMPERATURE RATING for of up to 250 degrees F and as low as -4 degrees F.
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

uxcell Aluminum Foil Tape Black Matte Tape Non Reflective 12mmx50m/164ft for HVAC, Sealing, Patching Hot and Cold Air Ducts

  • Temperature: Short Term 120℃/ Long Term 95℃.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • The tape is in a black finish, Non-Reflective but absorbs light from ambient light sources. suit for blocking lighting, spills/leakages on heat-generating equipment (projectors, light cans, barn-doors, etc)..
  • This adhesive aluminum tape provides an excellent bond on metals, plastics, copper, ceramic, and concrete. Conformable and pressure-sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • designed to easily seal HVAC Air Ducts as well as other Hot or Cold Intakes..
Check Stock

EXTECH Instruments 407113 CFM Metal Vane Anemometer

  • 4" (10cm) vane allows for more precise readings on larger size ducts.
  • Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point.
  • Multipoint and timed average calculations.
Check Stock

Tamarack TTi-RAPR12.4 RAPR 12' X 4' Wall Return Air Pathway - Retro Fit

  • COST-EFFICIENT – Great for bedrooms, this vent extends the life of any HVAC system. Saving money on cooling and heating is a breeze with a Tamarack Return Air Pathway. Plus, this item is BPI Listed by the Better Performance Institute..
  • LONG-LASTING & MADE IN USA – Made with durable metal material, this vent is covered by a lifetime manufacturer's warranty. While air flows freely between rooms, the internal baffle material prevents any increased transmission of light and sound through the vent. The unique design prevents air from escaping into wall cavities..
  • EASY WALL INSTALLATION – No need to install crossover or jump ducts with this convenient in-door vent. The retrofit two piece metal frame is expandable for ease of use. Included instructions make installation quick and simple..
Check Stock

uxcell 15mm Aluminum Foil Tape High Temperature Tape for HVAC,Sealing,Patching Hot and Cold Air Ducts Adhesive Tape 50m/164ft

  • Temperature resistance：long term: 80℃, short term.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Rubber Based Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Perfect for sealing air ducts, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..Please be noted,the tape only one side has adhesiveness.
Check Stock

uxcell 10mm Aluminum Foil Tape High Temperature Tape for HVAC,Sealing,Patching Hot and Cold Air Ducts Adhesive Tape 20m/65ft

  • Temperature resistance：long term: 80℃, short term.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Rubber Based Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • Perfect for sealing air ducts, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..Please be noted,the tape only one side has adhesiveness.
Check Stock

uxcell 15mm Aluminum Foil Tape High Temperature Tape for HVAC, Sealing, Patching Hot and Cold Air Ducts Single Sided Adhesive Tape 20m/65ft

  • Temperature: Short Term 200℃/ Long Term 80℃.
  • Aluminum Foil General Purpose - Waterproof, Flame Retardant, Strong Self Adhesive, Directly stretched around the area to be protected, no adhesives needed..
  • Good flame retardant and vapor barrier. Can be stored at any environment without damage, making this aluminum duct tape suit for window-type AC and heaters, vents, and ducting.Double sided conductive, ultra thick aluminum foil, conductive glue, anti-interference for electronic products, and wire harness wrapping has a better effect.
  • This adhesive aluminum tape provides excellent bond on metals, plastics, copper, ceramic and concrete. Conformable and pressure sensitive adhesive enables it to fit on corrugated joints and irregular corners..
  • designed to easily seal HVAC Air Ducts as well as another other Hot or Cold Intakes..
Check Stock