Reviews Dual Sheave Cable Pulley

Youngneer Zipline Trolley Kit with 25kN Carabiner Double Tandem Dual Pulley for 1/4 5/16 3/8 1/2 Cable for Backyard Zipline Climbing Rescue 30KN 6700LBS

  • ... CE certification. It has high security and stability. Adopted hot-forged aluminum-magnesium alloy shell and stainless steel ball bearing, this double trolley is very lightweight and durable, making it portable for your outdoor adventure activities..
  • 【Smooth Bearings & Large Breaking Strength】- This ball bearing pulley with dual 361 stainless steel well- polished bearing provides great smooth rotation. Its maximum rotation speed could reach to 35 m/s. This tandem pulley works far better than a single pulley. Besides, its maximum breaking strength could be reach to 30KN 6700LBS, so it can guarantee your safety at most outdoor applications such as climbing, rescue, swing seats or backyard zipline setting etc..
  • 【Coming with Carabiner】- Including an auto-locking climbing carabiner constructed by high strength stainless steel. Breaking Strength:25KN.
  • This carabiner makes your backyard zipline, swing seats, baby bouncer setting very easy. You only need to put this double pulley on your zipline, attaching the carabiner into the hole at bottom which you could to hanging swing seats or baby bouncer..
  • 【Cable Diameters】- This rescue pulley is designed for rope and cable.
Check Stock

Phoenix Mfg. V-Groove Drive Pulley, 2'' Diameter, 5/8\ Bore, Die Cast

  • Pulley outside diameter is 1.85 inch, 1 Groove.
  • Cast iron for resistance to wear and galling.
  • Standard V-belt Sheave Use with A, 3L & 4L (A & AX) V-Belts.
  • Inner diameter:3/4inch, Bore type:Fixed Bore.
  • Enjoy a smooth&worry-free return service within a month.
Check Stock

Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Drywall Lift,Drywall Panel Hoist Lift 11FT Sheetrock Lift Drywall Lift Professional Jack Lifter Heavy Duty Sheetrock Hoist Holder Upgrade Adjustable Telescopic Arm and Caster Wheel Lockable

  • 【150Lbs Load Capacity】This drywall lift is made of heavy duty steel. The panel hoist ensures its long service life. The panel hoist has a load capacity of approximately 150 lbs..
  • 【Allows One Person to Work Alone】This drywall lift is perfect for DIY and residential use. The panel hoist allows one person to work alone to install gypsum board walls and ceilings. The panel lifts are easy to position and adjust to place them exactly where I need them..
  • 【Safe and Balanced】 Drywall lift with wheelbase. Wide enough to stabilize a 12-foot drywall panel 15 feet off the ground, the panel lift's telescoping center is physically lifted by a cable/pulley mechanism. Turn the sheave in the panel lift's 3/16-inch metal aircraft cable..
  • 【Tool-Free Assembly】Easy to assemble, no tools required. Quick tool-free setup and disassembly for storage..
  • 【Adjustable Telescopic Arm and Panel Rotation】 The telescopic arm is adjustable and perfect for installing panels. It is a rubber telescopic arm that will not scratch your panels. This gypsum board lift can tilt 60° forward or backward and rotate 360°. Widely used for flat and pitched roofs..
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock