Reviews Dual Flute Step Drill Bit

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

  • 【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
  • 【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
  • 【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
  • 【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
  • 【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.
Check Stock

NEIKO 10173A Step Drill Bit Set for Metal and Wood, 5 Piece SAE, Spiral Grooved for Faster Drilling, Step Bits with 50 Total Step Sizes, Titanium Coated Unibits

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 50 step sizes combined, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 5 drill bits of a combined 50 sizes: Range is from 1/8” to 1-3/8”..
Check Stock

DEWALT Drill Bit, Black Oxide, 3/8-Inch x 12-Inch (DW1610)

  • 135 degree split point drills on contact and prevents walking.
  • Parabolic flute design improves chip ejection in metal and wood drilling applications.
  • Black oxide coated for greater wear resistance.
  • Helix is 31 degrees which minimizes the over aggressiveness of a true parabolic flute.
Check Stock

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • FTG Parabolic Flute offers wider flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow. The parabolic spiral allows chips to flow up quickly leaving less damage to be corrected after drilling. Package contains 3 Piece Same Size 9/64" (#6 screw) Replacement Tapered Drill Bit Only Without Four-cutter Countersink, made to replace the 9/64” bit of #6 Countersink FTG 6810PRB.
  • FTG Parabolic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
Check Stock

HIGHFIRE 10 Pieces Hex Shank Drill Bit Set for Impact Driver, HSS Twist Titanium Drill Bits for Metal, Hex Drive Quick Change Drill Bits Set

  • Sizes and Package - Drill bit sizes include: 1/16"*2, 3/32", 1/8"*2, 5/32", 3/16"*2, 1/4",3 /8". 10 PCS drill bit set in a double blister pack with easy opening design..
  • Sharp Cutting Edge - HIGHFIRE hex shank drill bit set has accurate tip geometry which ensures cutting edge sharp and strong. 135 degrees split point tip provides a no-walking drilling start on working surface..
  • Hex Shank Bits- Hex shank drill bits fit in quick-change impact drivers. Hex shank eliminates shank spinning in chuck when using pressure..
  • Solid Connection and Tapered Web - The strong connection of drill bits and shank transits high torque from drills to the tip of the drill bit without breakage. It also decreases radial runout to make the hole rounder. HIGHFIRE hex shank drill bits with tapered web design increases strength and reduces breakage..
  • Twist Flute and Titanium Coating - With optimized flute form, HIGHFIRE drill bit decreases friction and heat easily to ensure fast drilling and a long working life. 35-degree twist flute helps to remove chips quickly. TiN coating extends drill bits life 3 times longer..
Check Stock

3Pcs HSS Titanium Coated Step Drill Bit Set with Automatic Center Punch, 1/4' Hex Shank Drive Quick Change Metric High Speed Steel Cone Drill Bit for Steet Metal Wood Plastic Hole Cutting

  • 【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 【Material】HSS combined with a titanium coating. More capable and durable..
  • 【Easy Drilling】Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake.
  • 【SET INCLUDES】Bit #1 (5 steps): 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm).
  • Bit #2 (9 steps): 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm).
  • Bit #3 (15 steps): 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm).
  • 【Package Included】 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) + 1 Automatic Center Punch. 1/4" Hex shaft drives are suitable for all kinds of for home DIY power drills..
Check Stock

DEWALT Drill Bit Set 3 Piece Titanium Nitride Coated Longer Life and Better Chip Removal DWA1790IR

  • Titanium Nitride Coated two flute spiral design provides longer life and better chip removal for the DEWALT drill bit set.
  • Split point tip of the drill bit increases speed.
  • Laser engraved numbers increases step visiblity.
Check Stock

3Pcs HSS Titanium Coated Step Drill Bit Set 1/4 Hex Shank Quick Change High Speed Steel Cone Drill Bit Kit for Plastic Wood Metal Sheet Aluminum Hole Drilling Metric 4-12mm/4-20mm/4-32mm

  • 【Widely Used】Perfect Step Drill Bits suitable for drill holes in various material： within 3mm/0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 5mm/0.2 inch (Wood, PVC sheet, Insulation Boards). Not suitable for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 【Material】HSS combined with a titanium coating. More capable and durable..
  • 【Easy Drilling】Two-Flute Design for smoother cutting. High Step design let you feel the stop and never drill bigger in mistake.
  • 【SET INCLUDES】Bit #1 (5 steps): 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm).
  • Bit #2 (9 steps): 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm).
  • Bit #3 (15 steps): 4-32mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm,30mm,32mm).
  • 【Package Included】 3-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ). 1/4" Hex shaft drives are suitable for all kinds of for home DIY power drills..
Check Stock